• International journal of advanced smart convergence
• /
• 제8권3호
• /
• pp.78-86
• /
• 2019

Recently, IoT researches using sensor data based on embedded networks in various fields including healthcare and sports have been continuously attempted. This study analyzes golf ball mobility to support IoT application in golf sports field. Generally, since the difference in density occurs due to the condition of the inner material and the abnormal state at the time of the outer skin joining during the manufacturing of the golf ball, the weight of each subset is equal for any two points with the same radius in the sphere cannot be guaranteed. For this reason, the deflected weight of the sphere has the undesirable effect of hitting the ball in a direction in which the weight of the ball is heavy. In this study, it is assumed that there is a unique center of gravity of the ball, and even if the golf ball cannot be manufactured perfectly, it wants to establish the basic principle to accurately recognize or mark the putting line based on the center of gravity. In addition, it is evaluated how the mobility of the golf ball with a deviation from the center of gravity of the golf ball affects the progress path (or movement direction) and the moving distance (or carry distance) after the golfer hits. The basic model of the mobility of the golf ball can help the golfer exercise model and the correlation analysis. The basic model of the mobility of the golf ball can help the golfer exercise model and the correlation analysis.

• 한국대기환경학회지
• /
• 제31권6호
• /
• pp.573-584
• /
• 2015

In this study, the atmospheric dispersion of radioactive material ($^{137}Cs$) was simulated with regard to its impact within a 50-km radius from the Kori Nuclear Power Plant (NKPP) based on two different types of models (the non-steady-state puff model CALPUFF and the lagrangian model HYSPLIT) during the spring of 2012 (May 2012). The dispersion distribution of $^{137}Cs$ calculated in the CALPUFF model was similar to that of the HYSPLIT model, but the magnitudes of differences in its spatio-temporal concentrations between the two models were different. The $^{137}Cs$ concentrations simulated by the CALPUFF were significantly lower than those of the HYSPLIT due to a limitation of puff models (e.g. puff size growth over time). The CALPUFF had the advantage of determining the dispersion of radioactive materials and their impacts on the surrounding regions, compared with the HYSPLIT that had high concentrations of $^{137}Cs$ in only small local areas with the movement of air masses along the local winds.

• 한국동물위생학회지
• /
• 제25권1호
• /
• pp.75-86
• /
• 2002

Outbreaks from September 1999 to July 2000 of blackleg in 4 milking and fatting cattle farms in the vicinity of Munkyong(northwestern part of Gyeongbuk province) were investigated biochemical characteristics of isolates and were surveyed epidemiological works during the period of 2 months from August to September 2000. Clostridium chauvoei, the etiological agent of blackleg is a serious pathogen of cattle and sheep causing fever, depression and lameness with high mortality in growing phase of 6 to 18 months old mainly beef cattle. Biochemical and cultural properties of 4 isolated Cl chauvoei were identical to those of reported results and isolates were susceptible to ampicillin, bacitracin, chlorarnphenicol, cephalothin, ciprofloxacin, erythromycin, norfloxacin, penicillin, and tetracycline, while they were resistant to amikacin, colistin, gentamicin, kanamycin, neomycin, streptomycin and trimethoprim-sulfamethoxazole. In the results of epidemiological survey, outbreak farms that concentrated region of milking or fatting cattle in each sites were so close contact within a radius of about 1km that they are separated only by wire fence or shrub harrier and flies, rodents, wild cats and birds could have the chance to move around between those farms. The origin of the outbreak blackleg were uncertain, but the transmission between farms were mainly through the movement of farm personnel, vehicles which were struck the feces or manures from farm and other mechanical factors such as flies, rodents and birds furthermore occurred 4 farms were not vaccinated. In conclusion, a periodic disinfection, vaccination and quarantine prevention are ideal methods of damage reduction by blackleg.

• 한국자동차공학회논문집
• /
• 제12권3호
• /
• pp.59-65
• /
• 2004

In this paper a numerical study was performed for the effect of the wall curvature on the behaviors of fuel sprays impinging on the concave Surface. Actually, in the real diesel engines, a piston head has a curved shape for the purpose of the controlling the movement of fuel droplets and the mixture formation. For past decades, although many experimental and numerical works had been performed on the spray/wall impingement phenomena, the curvature effect of impinged wall was rarely investigated. The wall curvature affects on the behaviors of the secondary droplets generated by impingement and the concave wall obstructs the droplets to advance from the impinging site to outward. In present study, the simulation code was validated for the flat surface case and three cases of the different curvature were calculated and compared with the flat surface case for several parameters, such as the spray radius, the spray height and the position of vortex center of gas phase. The simulation results showed that the radial advance of the wall spray and the vortex is decreased with increasing the curvature. It was concluded that the curvature of the impinged wall significantly affects the behaviors of both the gas-phase and the droplet-phase.

• Earthquakes and Structures
• /
• 제15권4호
• /
• pp.411-417
• /
• 2018

To solve the seismic response problem of a vertical floating roof tank with base isolation, the floating roof is assumed to experience homogeneous rigid circular plate vibration, where the wave height of the vibration is linearly distributed along the radius, starting from the theory of fluid velocity potential; the potential function of the liquid movement and the corresponding theoretical expression of the base shear, overturning the moment, are then established. According to the equivalent principle of the shear and moment, a simplified mechanical model of a base isolation tank with a swinging effect is established, along with a motion equation of a vertical storage tank isolation system that considers the swinging effect based on the energy principle. At the same time, taking a 150,000 m 3 large-scale storage tank as an example, a numerical analysis of the dampening effect was conducted using a vibration mode decomposition response spectrum method, and a comparative analysis with a simplified mechanical model with no swinging effect was applied.

• 교육시설 논문지
• /
• 제21권1호
• /
• pp.23-32
• /
• 2014

Aim of this research is suggesting a satisfied studying space for lecturer, student and curriculum by abstraction of improvement plan which based on investigation and analysis of the space that teacher is using in lecturer and study support facility in school which managed in 'Department system'. This research focused on analyse of teacher's laboratory, teacher's room, and common room in middle and high school which managed and designed by 'Department system' and registered on 'Seoul office of education' and designed in management of department system between 2009 and 2012. With these process, a conclusion of this research is as in the following. Firstly, plan of teachers' private place which is efficient and stable is required through to get out of module which can cover subject band and grade band. Secondly, we have to focus on size of teachers' convenience facilities for convenience or official usage, movement radius, and improvement of working environments. Thirdly, 'Subject type teachers' laboratory' which organized by teachers who teach same subject is more efficient than 'Task type laboratory' which organized by teachers who working on same task for management of school. In fourth, 'Task type teachers' laboratory' arranged regardless with teachers' class room to teach, and it makes lack of connectivity between teacher and class room.

• 한국멀티미디어학회논문지
• /
• 제23권1호
• /
• pp.15-23
• /
• 2020

Recently, the increase in the elderly population due to an aging society has led to a relative increase in senile diseases such as vascular dementia or Alzheimer's disease, and the social burden for rehabilitation has increased. In addition, studies have been conducted for the risk assessment and prevention of musculoskeletal disorders. The purpose of this study is to suggest a system that can be used to help with dementia prevention training by tracking the movement of motion and virtual reality contents for the risk factors of musculoskeletal disorders of the elderly. We propose a training method for preventing dementia through musculoskeletal motion analysis algorithm and virtual reality content. Through motion recognition algorithm based on motion region design, we will track and analyze the moving radius of the target joint. The purpose of this study is to calculate and evaluate scores based on the time to accomplish the goals on virtual reality contents for the prevention of musculoskeletal disorders and the support of dementia prevention training, and the degree of difficulty, and to analyze the correlation between the results of performing K-MMSE and VR contents.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.213-219
• /
• 2001

In this paper, particle velocity of slurry flow, a kind of solid-particle two phase flow, was measured by using a particle tracking velocimetry. Particles are modeled by sphere-shaped glass whose diameters are 3mm, 5mm, and 7mm At first, a particle which is falling in the water is captured and analyzed to give their free falling velocity. The falling velocity was very high up to about 4m/sec in the air, which needs special algorithm for the accurate measurement. For the upwelling slurry flow in the straight duct, there are some noises caused by cavity. However, the effect was so small that it does not affect the measurement of large particles. From the preliminary study of applying the PTV to measurement of particle movement in slurry flow, we could find out the optimum value of parameters: threshold value., searching area radius and correlation area size.

• Journal of Welding and Joining
• /
• 제34권3호
• /
• pp.6-11
• /
• 2016

Joining Al/Fe dissimilar metals is becoming a subject of special interest in the assembly of automotive parts as a trade-off between the weight lightening and the cost reduction. Although various studies have been introduced to join Al alloy with the steel sheet by fusion welding, weak joint strength and galvanic corrosion still remained as problems to be solved. As a solid state welding, friction stir welding has been preferred to fusion welding processes in the dissimilar metal joints. This study investigated friction stir spot welding (FSSW) of Al alloy to the thin steel sheet with a thickness of 0.65 mm. The conventional FSSW is a stationary spot welding process but new approach adopted an additional circumferential movement in company with high speed tool rotation. A full factorial experimental design was implemented, and the main and interaction effects of parameters were analysed on the failure load in the tensile shear test. The direction and radius of rotation were statistically significant parameters and these two parameters affected the joint width and the shape of the hook.

• 한국군사과학기술학회지
• /
• 제19권5호
• /
• pp.638-644
• /
• 2016

In this research, theoretical study on empirical analysis method to estimate waterdrop's deformation by shock wave is presented. Flow field is calculated using theoretical and empirical relations. Waterdrop's deformation including movement, size, mass, and orientation is modeled using empirical relations derived from existing experimental data. Developed method is applied to specific flight examples with arbitrary flight speed and vehicle's configuration. The flight speed is assumed to Mach number of 2 and 4. The diameter of waterdrop is varied from 1 to 5 mm. Waterdrops along the stagnation line in front of hemispherical nose with the radius of 50 mm and around a cone-shaped side wall with the half angle of 20 degree are considered. It is found that the maximum diameter of the waterdrop is increased up to 2.77 times the initial diameter. The mass is conserved more than 66.7 %. In the case of a cone-shaped side wall, waterdrop's orientation angles defined from the flight direction when the Mach number is 2 and 4 are calculated as 33.0 and 25.6 degree, respectively.