• 한국광학회지
• /
• 제28권1호
• /
• pp.16-21
• /
• 2017

고광도 섬광에 의하여 사람 눈에 미치는 영향을 체계적으로 이해하는 것은 고섬광의 사용상에나 눈의 보건의학적인 관점에서 큰 가치가 있다. 본 논문에서는 고섬광의 안전지표로서 노출제한거리를 제안하고, 섬광의 특성으로부터 노출제한 노출제한거리를 구하는 방법을 제시한다. 본 연구에서 고려한 고섬광에 대한 노출제한을 결정하는 요인은 망막에서 투영되는 열적 에너지이며 이는 망막의 열적위험을 나타내는 열적유효복사휘도로 표현된다. 고섬광의 노출제한거리는 열적 유효복사휘도 또는 광도와 광원 반경에 거의 비례하나 지속시간에는 거의 의존하지 않는다. 고섬광의 노출제한거리가 지속시간에 비례하지 않는다는 점은 눈에 미치는 영향이 노출되는 시간에 비례할 것이라는 기대와는 다른 중요한 발견으로 생각된다. 본 연구에서 제안된 노출제한거리는 고섬광의 연구개발과 활용에서 뿐만 아니라 눈을 보호하는 보건의학 분야에서도 안전지표로서 중요하게 활용될 것으로 기대된다.

• 천문학회보
• /
• 제37권2호
• /
• pp.211.1-211.1
• /
• 2012

The on-orbit test simulation for predicting the instrument directional responsivity was conducted by the Monte Carlo based integrated ray tracing (IRT) computation technique and analytic flux-to-signal conversion algorithms. For the on-orbit test simulation, the Sun model consists of the Lambertian scattering sphere and emitting spheroid rays, the Amon-Ra instrument is a two-channel including a broadband scanning radiometer (energy channel) and an imager with ${\pm}2^{\circ}$ FOV (visible channel). The solar radiation produced by the Sun model is directed to the instrument viewing port and traced through the dual channel optical train. The instrument model is rotated on its rotation axis and this gives a slow scan of the Sun model over the full field of view. The direction of the incident lights are fed with scanned images obtained from the visible channel instrument. The instrument responsivity was computed by the ratio of the incident radiation input to the instrument output. In the radiometric simulation, especially, measured BRDF of the 3D CPC was used for scattering effects on radiometry. With diamond turned 3D CPC inner surface, the anisotropic surface scattering model from the measured data was applied to ray tracing computation. The technical details of the on-orbit test simulation are presented together with field-of-view calibration plan.

• Safety and Health at Work
• /
• 제12권1호
• /
• pp.114-118
• /
• 2021

Background: Exposure to particulate matter (PM) emitted from vehicle exhaust might disrupt systemic function and elevate the risk of cardiovascular disease. In this study, we examined the changes of cardiometabolic biomarkers among vehicle inspectors exposed daily to PM0.25 and components. Methods: This cross-sectional study was conducted at two vehicle inspection centers, Pulogadung and Ujung Menteng, located in East Jakarta, Indonesia. The exposed respondents were 43 workers from vehicle inspection centers, and the unexposed group consisted of 22 staff officers working in the same locations. Vehicle exhaust particulate matter was measured for eight hours using a Leland Legacy personal pump attached to a Sioutas Cascade Impactor. The used filters were 25 and 37-mm quartz filters. The particulate matter concentration was analyzed using a gravimetric method, whereas trace elements were analyzed using energy dispersive X-ray fluorescence. An EEL Smoke Stain Reflectometer analyzed black carbon. Results: The personal exposure concentrations of PM0.25 were 10.4-fold higher than those in unexposed groups. Calcium and sulfur were the major components in the obtained dust, and their levels were 3.3- and 7.2-fold higher, respectively, in the exposed group. Based on an independent-samples t-test, high-density lipoprotein, triglyceride, HbA1c, total immunoglobulin E, high-sensitivity C-reactive protein, tumor necrosis factor-alpha, and nitric oxide levels were significantly different between the groups. Conclusions: In summary, it was suggested that PM0.25 exposure from vehicle exhaust might affect cardiometabolic biomarkers change.

• 한국광학회지
• /
• 제35권2호
• /
• pp.61-70
• /
• 2024

400 nm부터 1,600 nm까지의 파장 영역에서 단일모드 광섬유에 결합된 12개의 다이오드 레이저 광원를 기반으로 하는 레이저 복사출력계 교정시스템을 소개한다. 본 시스템은 복사출력 측정위치에서 레이저 출력요동을 최소화하였고 모든 광원에 대해 비슷한 빔 크기를 갖는다. 또한 감응도의 비균일도 및 비선형성을 최소화하기 위해 적분구 기준기를 사용하였다. 이 교정시스템의 최소 측정불확도는 대부분의 레이저 파장에서 1.1% (k=2)로 추정된다.

• 아시안잔디학회지
• /
• 제22권1호
• /
• pp.1-12
• /
• 2008

Multi-spectral radiometer (MSR)를 사용한 리모트 센싱 기술이 향 후 잔디의 건조스트레스를 감지할 수 있는 도구로 사용될 수 있다. 본 연구의 목적은 네가지 각기 다른 조건의 건조스트레스를 받은 난지형 잔디의 잎에서 반사되는 Reflectance와 토양수분, 비주얼 잔디상태, 엽록소 함량, 광합성 등을 측정하여 각 factor간의 상관관계를 조사했으며 본 연구를 통해 모든 factor가 MSR 데이터와 질은 상관관계를 가지고 있었다. 또한 Reflectance 민감도는Visual spectral region보다 Infrared spectral region에서 더 높음을 알 수 있었다. 모든 결과를 종합해 볼 때 Multi-spectral radiometer (MSR)은 잔디의 건조상태를 미리 예측할 수 있는 도구로 사용될 수 있음을 확인할 수 있었다. 이 기술의 자료를 활용하게 된다면 향 후 MSR이 부착된 기구(Balloon)를 이용한 필드 스터디 연구로 확대될 수 있을 것이다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.220-223
• /
• 2008

A camera system for the satellite application performs the mission of observation by measuring radiated light energy from the target on the earth. As a development stage of the system, the signal level analysis by estimating the number of electron collected in a pixel of an applied CCD is a basic tool for the performance analysis like SNR as well as the data path design of focal plane electronic. In this paper, two methods are presented for the calculation of the number of electrons for signal level analysis. One method is a quantitative assessment based on the CCD characteristics and design parameters of optical module of the system itself in which optical module works for concentrating the light energy onto the focal plane where CCD is located to convert light energy into electrical signal. The other method compares the design\ parameters of the system such as quantum efficiency, focal length and the aperture size of the optics in comparison with existing camera system in orbit. By this way, relative count of electrons to the existing camera system is estimated. The number of electrons, as signal level of the camera system, calculated by described methods is used to design input circuits of AD converter for interfacing the image signal coming from the CCD module in the focal plane electronics. This number is also used for the analysis of the signal level of the CCD output which is critical parameter to design data path between CCD and A/D converter. The FPE(Focal Plane Electronics) designer should decide whether the dividing-circuit is necessary or not between them from the analysis. If it is necessary, the optimized dividing factor of the level should be implemented. This paper describes the analysis of the electron count of a camera system for a satellite application and then of the signal level for the interface design between CCD and A/D converter using two methods. One is a quantitative assessment based on the design parameters of the camera system, the other method compares the design parameters in comparison with those of the existing camera system in orbit for relative counting of the electrons and the signal level estimation. Chapter 2 describes the radiometry of the camera system of a satellite application to show equations for electron counting, Chapter 3 describes a camera system briefly to explain the data flow of imagery information from CCD and Chapter 4 explains the two methods for the analysis of the number of electrons and the signal level. Then conclusion is made in chapter 5.