• 치과방사선
• /
• 제21권1호
• /
• pp.73-81
• /
• 1991

저자는 악간절기능장애의 소견을 가진 환자 75명과 악관절기능장애의 병마 및 현증이 없는 정상인 75명을 표준화된 조건하에서 두부축방향방사선촬영을 하여 과두수평각과 initial 및 final depth of cut를 측정하고 통계학적으로 분석한 결과를 다음과 같이 요약할 수 있었다. 환자군과 정상군, 환측과 비환측에 있어 과두수평각과 initial 및 final depth of cut는 통계학적으로 유의한 차가 없었으므로 두부축방향방사선사진은 임상에서 악관절기능장애의 유무 및 환측과 비환측의 감별에 이용하기에 부적합한 방법이라 사료된다. 본 연구의 계측치는 편차가 심하므로 환자마다 과두수평각을 측정하여 이각에 맞추어 악관절단층촬영을 해야 한다고 사료된다.

• 디지털융복합연구
• /
• 제16권12호
• /
• pp.441-447
• /
• 2018

이 연구의 목적은 증강현실기술을 활용하여 치과 방사선 촬영술의 반복 연습이 가능한 디지털 콘텐츠를 개발하는데 있다. 성인 모델의 외형을 사진 촬영하고, 실습용 마네킹 팬텀을 컴퓨터 단층 촬영한 후, 이를 중첩하여 삼차원 객체를 제작하였다. 또한, 결과로 출력되는 106장의 방사선사진은 촬영법과 관련된 치아 정보를 활용하여 데이터베이스화하였고, 학습자가 성공적인 촬영을 수행하면 각 촬영조건에 맞는 부위별 영상이 호출되도록 시스템을 구축하였다. 이를 통해 임상 전 단계에서의 연습을 반복적으로 시행할 수 있었다. 이 콘텐츠를 이용하여 치과위생사의 방사선 촬영 임상 실무역량을 향상하는데 기여하고자 한다. 다만, 직접 얼굴인식을 통해 촬영하는 것이 실습효용 가치가 클 것으로 예상하기 때문에 이에 관련한 후속 연구가 필요하다.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.592.2-592
• /
• 2001

The purpose of this study was to evaluate the efficiency of the four obturation techniques. In this study, eighty teeth were instrumented and randomly divided into 4 groups of 20 teeth each, according to the obturation techniques Group A was used with Microseal. in Group B, Thermafil. in Group C, continuous wave techniques, in Group D cold lateral condensation methods were used. After obturation, the teeth were taken a digital radiograph in mesiodistal and buccolingual directions to study the quality of the obturation.(omitted)

• 치과방사선
• /
• 제28권2호
• /
• pp.471-489
• /
• 1998

For the successful endodontic treatment, root canal should be cleaned thoroughly by accurate mechanical and chemical canal preparation and sealed completely with canal filling material without damaging the periapical tissues. The accuracy of the root canal length measurement is a prerequisite for the success of the endodontic treatment, and the root canal length is often determined by the standard periapical radiographs and digital tactile sense. In this study, the accuracy and the clinical usefulness of Digora/sup (R)/, an intraoral digital imaging processor and the conventional standard radiographs were compared by measuring the length from the top of the file to the root apex. 30 single rooted premolars were invested in a uniformly sized blocks and No.25 K-file was inserted into and fixed in each canal. Each block was placed in equal distance and position to satisfy the principle of the bisecting angle and paralleling techniques and Digora/sup (R)/ system's image and standard periapical radiographs were taken. Each radiograph was examined by 3 different observers by measuring the length from top of the file to the root apex and each data was compared and analyzed. The results were as follows; 1. In the bisecting angle technique, the average difference between the Digora/sup (R)/ system and standard periapical radiograph was 0.002 mm and the standard deviation was 0.341 mm which showed no statistically significant difference between the two systems(p>0.05). Also, in the paralleling technique, the average difference between these two system was 0.007 mm and the standard deviation was 0.323 mm which showed no statistically significant difference between the two systems(p>0.05). 2. In Digora/sup (R)/ system, the average difference between the bisecting angle and paralleling technique was -0.336 mm and the standard deviation was 0.472 mm which showed a statistically significant difference between the two techniques(p<0.05). Also, in the standard periapical radiographs, the average difference between the bisecting angle and paralleling technique was 0.328 mm and the standard deviation was 0.517 mm which showed a statistically significant difference between these two techniques(p<0.05). 3. In Digora/sup (R)/ system and the standard periapical radiographs. there was a statistically significant difference between the measurement using the bisecting angle technique and the actual length(p<0.05), But there was no statistically significant difference between the measurement using the paralleling technique and the actuallength(p>0.05). In conclusion. the determination of the root canal length by using the Digora/sup (R)/ system can give us as good an image as the standard periapical radiograph and using the paralleling technique instead of the bisecting angle technique can give a measurement closer to the actual canal length. thereby contributing to a successful result. Also. considering the advantages of the digital imaging processor such as decreasing the amount of exposure to the patient. immediate use of the image. magnification of image size. control of the contrast and brightness and the ability of storing the image can give us good reason to replace the standard periapical radiographs.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.768-779
• /
• 1995

This study was performed to investigate the effect of root canal shaping techniques on the change of the shape of prepared root canal. 40 mesiobuccal canals of recently extracted mandibular 1st and 2nd molars were divided into 4 groups and shaped by step-down/balanced force technique, step-down/step-back technique, step-back technique and conventional technique respectively. The change of the shape of root canal was traced by superimposing the radiographs obtained before and after shaping of each root canal. The results were as follows. 1. By the experimented techniques except conventional technique, the root canals were more shaped in convex side of apical area and in concave side of most curved and coronal area than in the other sides(P<0.05). By conventional technique, the root canals were more shaped in convex side than in convave side from apex to orifice(P<0.05). 2. By step-down/balanced force technique, the cancave sides at C and D points of proximal view and C point of clinical view were more shaped than the convex side(P<0.05). Through the entire canal, the concave side was more shaped than the convex side in proximal view(P<0.01). But there was no statistical difference between both sides in clinical view. 3. By step-down/step-back technique, the change of root canal shape was not statistically different in concave and convex sides at each point of both views(P>0.05). And through the entire canal in proximal view, there was no statistical difference in shaping percentage between both sides. But through the entire canal in clinical view, the concave side was more shaped than the convex side(P<0.1). 4. By step-back technique, the convex side at B point of clinical more shaped than the other sides(P<0.05). Through the entire canal in proximal and clinical views, there was no statistical difference in shaping percentage between both sides. 5. Comparing the total shaping percentage among techniques, that in conventional technique was the greatest numerically, and followed by the percentages in step-down/step-back, step-down/balanced force and step-back technique. But, in proximal view, shaping percentages were not statistically different among techniques(P>0.05, ANOVA test). In clinical view, shaping percentages in step-back and conventional techniques were statistically different(P<0.01, ANOVA test). * Proximal view: radiograph taken in mesiodistal direction. * Clincal view: radiograph taken in faciolingual direction. A point : 1mm point from radiographic apex B point : center point between A and C points C point : most curved point of root canal D point : center point between C point and canal oriffice.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.361-362
• /
• 2007

We propose a contrast-controlled feature detection approach for steel radiograph image. X-ray images are low contrast, dark and high noise image. So, It is not simple to detect defects directly in automated radiography inspection system. Contrast enhancement, histogram equalization and median filter are the most frequently used techniques to enhance the X-ray images. In this paper, the adaptive control method based on contrast limited histogram equalization is compared with several histogram techniques. Through comparative analysis, CLAHE(contrast controlled adaptive histogram equalization) can enhance detection of defects better.

• Journal of information and communication convergence engineering
• /
• 제17권4호
• /
• pp.274-278
• /
• 2019

It is important that students are provided opportunities to practice their skills in acquiring radiographic images. However, these opportunities are currently limited because of the risk of radiation exposure. To overcome this limitation, a new augmented reality-based radiography simulator was developed that enables students to practice radiographic techniques as part of self-directed learning without time and space constraints. Subsequently, cross-sectional images of a manikin phantom head obtained via computed tomography were reconstructed into a three-dimensional object. An image marker that could be recognized by a mobile device and could allow users to practice dental radiography techniques was devised. The three-dimensional object was augmented to the mobile device; consequently, among 106 stored dental radiographs on the device, a radiograph corresponding to specific imaging conditions was opened when users performed radiographic procedures. This technology could improve dental students' understanding of dental anatomy and contribute to improving their competency in acquiring dental radiographs.

• 한국방사선학회논문지
• /
• 제13권7호
• /
• pp.979-986
• /
• 2019

본 연구는 Rib Rando Phantom을 이용하여 겨드랑 첫 번째, 두 번째 갈비뼈 골절이 선예하게 나타나는 영상의 검사방법을 연구하였다. 팬톰의 자세와 엑스선관 각도를 수직, 머리쪽 5°, 다리쪽 5°로 변경하여 검사하였다. 획득한 영상을 방사선사가 주관적으로 영상평가 하였으며, 평가 데이터를 SPSS ver. 3.0으로 분석하였다. ImageJ Program을 이용하여 신호대잡음비(SNR)를 계산하였다. 그 결과 Cronbach Alpha 값이 0.789로 유의하게 높았다. 신호대잡음비(SNR)의 결과는 갈비뼈 앞쪽의 경우 엑스선관을 머리쪽으로 5° 기울여 검사 시 6.038, 갈비뼈 뒤쪽의 경우 엑스선관을 다리쪽으로 5° 기울여 검사 시 7.860으로 가장 높았다. 겨드랑 갈비뼈의 촬영기법으로 앞쪽 검사는 골절된 부위를 거상하고 엑스선관 각도를 머리쪽으로 5° 주며, 뒤쪽 검사는 골절된 부위를 밀착하여 엑스선관 각도를 발쪽으로 5° 기울여 검사한다면 선예한 영상을 얻을 수 있을 것으로 사료된다.

• Imaging Science in Dentistry
• /
• 제39권2호
• /
• pp.69-73
• /
• 2009

Purpose: This study compared panoramic radiography and cone beam computed tomography (CBCT) for evaluating the relationship between the maxillary sinus floor and the roots of maxillary molars. Materials and Methods: Paired panoramic radiographs and CBCT images from 97 subjects were analysed. This analysis classified 388 maxillary molars according to their relationship to the maxillary sinus floor on panoramic radiograph and CBCT. Correlations between these two radiographic techniques were examined. Results: Maxillary molar roots that were separate from the sinus floor showed the same classification in 100% of the cases when using these two imaging techniques. The corresponding percentage for such roots that were in contact with the sinus floor was 75%. When roots overlapped the maxillary sinus floor on panoramic radiographs, only 26.4% of maxillary first molars and 60.0% of second molars showed protrusion of roots into the sinus with CBCT. Conclusion : The results of the study suggest that roots projecting into the sinus on panoramic radiographs require a three-dimensional image in order to analyze the proximity of their apex to the sinus floor. (Korean J Oral Maxillofac Radiol2009; 39 : 69-73)

• Tuberculosis and Respiratory Diseases
• /
• 제57권2호
• /
• pp.118-124
• /
• 2004

Lung cancer is the leading cause of cancer death for men and women in the industrialized world. It is desirable to detect disease at a stage when it is not causing symptoms and when control or cure is possible. If the screening test detects patients with the disease at an early stage, they can be examined to confirm the diagnosis and intervention can alter the natural history of the disease. The results of screening programs designed to detect early lung cancer using either conventional chest radiograph or sputum cytology are disappointing for a diagnostic screening test. Because of advances in helical CT imaging techniques, screening for lung cancer has been suggested as a possible method of improving outcome. Findings in recent publications suggest that substantial dose reduction is possible in chest CT. The advantages of low-dose CT are more sensitive than chest radiograph for detecting small pulmonary nodules that may be lung cancers, shorter scanning time than conventional chest CT scan without intravenous contrast injection, cheaper cost than standard CT, low radiation dose. However, the true clinical significance of the small tumors found by screening is still unknown, and their effect on mortality awaits future investigation. Furthermore, in addition to detecting an increased number of lung cancers, low-dose CT found at least one indeterminate nodule in many of all screened patients. The majority should be benign but evaluation of all these indeterminate nodules is not a trivial problem in routine practice. In conclusion, lung cancer screening with low-dose CT is a complex subject. The true effectiveness of lung cancer screening (a reduction in mortality from lung cancer) with low-dose CT can be determined through well-designed randomized control trials with enrolment of appropriate subjects.