• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 Proceedings of the 4th Korea-China Joint Workshop on Nuclear Waste Management
• /
• pp.42-50
• /
• 2004

The pool $(3m{\times}6m{\times}10m{\times}$ in Irradiated Materials Examination Facility is generally used to transport irradiated materials between a moving cask and hot-cell. During the operation in the pool such as loading/unloading the cask, holding specimen and bucket elevation, water maybe contaminated by radioactive or contaminated impurities from irradiated materials. Then, it must be purified and filtered continuously to keep lower radioactivity than that of regulation prescribed by RCA Korea Activity in a part of radioactive contamination control. This paper described radioactive contamination distribution of water as transported materials, which is related to effective operation of purification and filtration system.

• 핵의학기술
• /
• 제14권2호
• /
• pp.128-132
• /
• 2010

핵의학과 종합조작실은 방사선 관리구역으로 이곳에서 발생된 방사성오염물질은 방사성폐기물로 간주하여 일반쓰레기와 별도로 관리를 해야 한다. 본 실험은 우리가 미처 인식하지 못해 일반쓰레기로 처분되었던 방사성오염물질의 오염도를 측정하고 원인을 분석하여 보다 적극적인 방사성폐기물 관리 운영의 필요성을 제시하고자 함이다. 측정대상은 방사성의약품을 표지하기 위해 사용된 생리식염수와 $^{99}Mo$/$^{99m}Tc$ generator(국산 및 외산)에서 발생한 generator cap, saline needle cap, $^{99m}Tc$-needle cap, saline vial로 하였고, gamma survey meter를 이용하여 평균값과 표준 편차(mean${\pm}$SD)로 나타냈다. 측정대상물질의 오염유무를 알기 위해 방사선 관리구역에서 반출될 수 있는 물질의 표면오염도인 최대허용표면오염도의 1/10(43.2 cpm)을 기준값으로 정하였다. 각각의 표면오염도를 측정한 결과 방사성의약품 표지를 위해 사용된 생리식염수에서는 $14,429{\pm}26,378$ cpm으로 최대 허용표면오염도의 1/10을 초과하였다. 그리고 측정된 generator중 외산에서는 generator cap: $17{\pm}28$ cpm, saline needle cap: $35{\pm}66$ cpm, $^{99m}Tc$-needle cap: $9{\pm}21$ cpm, saline vial: $13{\pm}28$ cpm으로 최대허용표면오염도의 1/10를 초과하지 않았지만 국산에서는 generator cap: $22,852{\pm}52,545$ cpm, saline needle cap: $87,367{\pm}109,711$ cpm, $^{99m}Tc$-needle cap: $9,008{\pm}10,459$ cpm, saline vial: $186,416{\pm}158,196$ cpm으로 최대 허용표면오염도의 1/10를 초과하였다. 외산 generator에서 발생한 측정대상물질은 일반폐기물로 처분하고 국산 generator와 방사성의약품을 표지하기 위해 사용된 생리식염수는 반드시 방사성폐기물로 간주하여 처분해야 한다. 따라서 일반쓰레기 뿐만 아니라 종합조작실에서 반출되는 모든 물질에 대한 자체적인 방사선측정, 기록 및 비치와 방사성폐기물에 대한 지속적인 교육을 통해 방사성 폐기물이 일반쓰레기로 처분되어 나가는 것을 예방 할 수 있을 것이다.

• Journal of Radiation Protection and Research
• /
• 제41권2호
• /
• pp.133-140
• /
• 2016

Backgrounds: The accident at Fukushima Daiichi Nuclear Power Plant (NPP), March 2011, caused serious radioactive contamination over wide area in east Japan. Therefore, it is important to know the effect of the accident and the status of NPP. Materials and Methods: This paper provides a review on the status of radiation dose and radioactive contamination caused by the accident on the basis of publicized information. Results and Discussion: Monitoring of radiation dose and exposure dose of residents has been conducted extensively by the governments and various organizations. The effective dose of general residents due to the accident proved to be less than a mSv both for external and internal dose. The equivalent committed dose of thyroid was evaluated to be a few mSv in mean value and less than 50 mSv even for children. Monitoring of radioactivity concentration has been carried out on food ingredients, milk and tap water, and actual meal. These studies indicated the percentage of foods above the regulation standard was over 10% in 2011 but decreasing steadily with time. The internal dose due to foods proved to be tens of ${\mu}Sv$ and much less than that due to natural $^{40}K$ even in the Fukushima area and decreasing steadily, although high level concentration is still observed in wild plants, wild mushrooms, animals and some kind of fishes. Conclusion: According to extensive studies, not only the effect of the accident but also the pathway and countermeasures against radioactive contamination have been revealed, and they are applied very effectively for restoration of environment and reconstruction of the area.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.162-167
• /
• 2003

조사재시험시설에 설치되어 있는 풀$(3m{\times}6m{\times}10m)$은 조사재운반용 수송용기(Cask)를 풀에 하역하여 풀물 속에서 조사재(시료)를 꺼내어 핫셀 내로 반입/반출하는 목적으로 사용한다. 수송용기를 풀에 하역하여 시료를 취출시 또는 버켓 엘리베이터에 장착시 모든 작업은 육안으로 행하여지기 때문에 항상 풀물을 양호한 수준으로 관리하여 수중취급 작업을 용이하게 하여야 하며, 방사성 오염관리 측면에서는 물에 잔존해 있는 방사성물질을 원자력법령에서 정하는 규정치 이하로 관리하여야 한다. 본 논문에서는 조사재시험시설에 설치하여 운용하고 있는 풀물정화장치 운전에 의한 방사능오염 및 수질에 대한 거동을 반출입된 시료별로 오염분포를 기술하였다.

• Journal of Radiation Protection and Research
• /
• 제41권1호
• /
• pp.7-14
• /
• 2016

연구배경: 본 연구는 일본 후쿠시마 원전사고 이후 원전사고 및 방사능 오염에 대한 우리 국민들의 인식도를 확인하기 위한 목적으로 진행되었다. 재료 및 방법: 설문조사는 수도권에 거주하는 성인 600명을 대상으로 하였다. 결과 및 논의: 연구 결과, 대다수 국민들은 일본 원전사고로 인한 방사능 누출이 우리나라에 영향을 미치고 있다고 우려하였다. 식품, 특히 수산물의 방사능 오염에 대한 우려가 높았고, 선호하는 정보 취득원은 TV(49.8%)와 인터넷 매체(31.3%)였다. 한편 다수의 국민들은 일본 원전사고 및 방사능 오염 정보가 충분히 제공되지 않았고, 원전사고 이후 우리 정부의 대응조치를 잘 모르고 있는 것으로 나타났다. 또한 국민 대다수가 식품 환경 등의 방사능 오염 정도와 안전성에 대한 정보제공 강화가 가장 중요한 것으로 인식하고 있었다. 결론: 본 연구 결과는 향후 방사능에 대한 올바른 인식 확립과 방사능 안전사고 리스크커뮤니케이션을 위한 유용한 자료로 활용될 수 있을 것으로 기대된다.

• 방사선산업학회지
• /
• 제11권3호
• /
• pp.123-130
• /
• 2017

Concerns about high radiation exposure to the hands of radiation workers who may contact with radioactive contamination on surfaces in a nuclear power plant (NPP) had been raised, and the Korean regulatory body required the extremity dose estimation during contact tasks with radioactive materials. Korean NPPs conducted field tests to identify the incident radiation to the hands of radiation workers who may contact with radioactive contamination during maintenance periods. The results showed that the radiation fields for contact tasks are dominated by high energy photons. It was also found that the radiation doses to the hands of radiation workers in Korean NPPs were much less than the annual dose limits for extremities. This approach can be applicable to measure and estimate the extremity dose to the hands of medical workers who handle the radioactive materials in a hospital.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2009년도 학술논문요약집
• /
• pp.84-85
• /
• 2009

New approaches for detecting, preventing and remedying environmental damage are important for protection of the environment. Procedures must be developed and implemented to reduce the amount of waste produced in chemical processes, to detect the presence and/or concentration of contaminants and decontaminate fouled environments. Contamination can be classified into three general types: airborne, surface and structural. The most dangerous type is airborne contamination, because of the opportunity for inhalation and ingestion. The second most dangerous type is surface contamination. Surface contamination can be transferred to workers by casual contact and if disturbed can easily be made airborne. The decontamination of the surface in the nuclear facilities has been widely studied with particular emphasis on small and large surfaces. The amount of wastes being produced during decommissioning of nuclear facilities is much higher than the total wastes cumulated during operation. And, the process of decommissioning has a strong possibility of personal's exposure and emission to environment of the radioactive contaminants, requiring through monitoring and estimation of radiation and radioactivity. So, it is important to monitor the radioactive contamination level of the nuclear facilities for the determination of the decontamination method, the establishment of the decommissioning planning, and the worker's safety. But it is very difficult to measure the surface contamination of the floor and wall in the highly contaminated facilities. In this study, the poly(styrene-ethyl acrylate) [poly(St-EA)] core-shell composite polymer for measurement of the radioactive contamination was synthesized by the method of emulsion polymerization. The morphology of the poly(St-EA) composite emulsion particle was core-shell structure, with polystyrene (PS)as the core and poly(ethyl acrylate) (PEA) as the shell. Core-shell polymers of styrene (St)/ethyl acrylate (EA) pair were prepared by sequential emulsion polymerization in the presence of sodium dodecyl sulfate (SOS) as an emulsifier using ammonium persulfate (APS) as an initiator. The polymer was made by impregnating organic scintillators, 2,5-diphenyloxazole (PPO) and 1,4-bis[5-phenyl-2-oxazol]benzene (POPOP). Related tests and analysis confirmed the success in synthesis of composite polymer. The products are characterized by IT-IR spectroscopy, TGA that were used, respectively, to show the structure, the thermal stability of the prepared polymer. Two-phase particles with a core-shell structure were obtained in experiments where the estimated glass transition temperature and the morphologies of emulsion particles. Radiation pollution level the detection about under using examined the beta rays. The morphology of the poly(St-EA) composite polymer synthesized by the method of emulsion polymerization was a core-shell structure, as shown in Fig. 1. Core-shell materials consist of a core structural domain covered by a shell domain. Clearly, the entire surface of PS core was covered by PEA. The inner region was a PS core and the outer region was a PEA shell. The particle size distribution showed similar in the range 350-360 nm.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제16권6호
• /
• pp.113-121
• /
• 2011

In this study, we suggested the management scheme of analyzing the national and oversea related policy against soil and groundwater contamination by radioactive materials due to nuclear accidents. In Korea, we need to remedy swiftly the contaminated land due to intensive land development demand. So, we need to develop more effective management scheme to recover actively the land contaminated by radioactive materials. We require to improve monitoring network, to expand media-specific monitoring system, to prepare management system for remediation of contaminated land, and to develop flow work for soil and groundwater remediation.

• 방사성폐기물학회지
• /
• 제19권1호
• /
• pp.123-132
• /
• 2021

Radiological impact analyses were carried out for a near-surface radioactive waste repository at Gyeongju in South Korea. The RESRAD-ONSITE code was applied for the estimation of maximum exposure doses by considering various exposure pathways based on a land area of 2,500 ㎡ with a 0.15 m thick contamination zone. Typical influencing input parameters such as shield depth, shield materials' density, and shield erosion rate were examined for a sensitivity analysis. Then both residential farmer and industrial worker scenarios were used for the estimation of maximum exposure doses depending on exposure duration. The radiation dose evaluation results showed that 60Co, 137Cs, and 63Ni were major contributors to the total exposure dose compared with other radionuclides. Furthermore, the total exposure dose from ingestion (plant, meat, and milk) of the contaminated plants was more significant than those assessed for inhalation, with maximum values of 5.5×10-4 mSv·yr-1 for the plant ingestion. Thus the results of this study can be applied for determining near-surface radioactive waste repository conditions and providing quantitative analysis methods using RESRAD-ONSITE code for the safety assessment of disposing radioactive materials including decommissioning wastes to protect human health and the environment.

• Nuclear Engineering and Technology
• /
• 제55권1호
• /
• pp.12-24
• /
• 2023

With the improvement of laser technology, the strategic needs of efficient and precise decontamination of various components in nuclear application units can be fulfilled by laser decontamination. The surface contaminants of nuclear facilities mainly exist both as loose contaminated layer and fixed oxide layer. The types of radionuclides and contamination layer thickness are closely related to the operation status of nuclear facilities, which have an important influence on the laser decontamination process. This study reviewed the mechanism of laser surface treatment and the influence of laser process parameters on the decontamination thickness, decontamination factor, decontamination efficiency and the distribution of aerosol particle. Although multiple studies have been performed on the mechanism of laser processing and laser decontamination process, there are few studies on the microscopic process mechanism of laser decontamination and the influence of laser decontamination on surface properties. In particular, the interaction between laser and radioactive contaminants needs more research in the future.