• Journal of electromagnetic engineering and science
• /
• v.12 no.1
• /
• pp.20-25
• /
• 2012

In this paper, the EM wave absorber for ETC system was designed and fabricated. We fabricated several samples in different composition ratios of flaked sendust and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability according to composition ratio. The optimized mixing ratio of flaked sendust and CPE was found as 60 : 40 wt.% by experiments and simulation. Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the developed EM wave absorber has the thickness of 2.75 mm and absorption ability was 22.5 dB in the case of normal incidence at 5.8 GHz. Therefore, it was confirmed that the newly developed absorber can be used for ETC system.

• Journal of Astronomy and Space Sciences
• /
• v.9 no.1
• /
• pp.69-88
• /
• 1992

The effects of the ionosphere on the radio wave propagation are scattering of radio waves, attenuation, angle error, ranging error, and time delay. If ionospheric conditions are suitable, the charged particles can remove energy from radio waves and thus attenuate the signal. Also, a radio wave traveling a path along which the electron density is not constant undergoes changes in direction, positon and time of propagation. The present study is based on Korean ionospheric data obtained at the AnYang Radio Research Institute from Jan. 1985 through Oct. 1989. The data are used to simulate the Korean ionosphere following the Chapman law. The effects of the model ionosphere on the radio wave propagation, such as the angle, position error, time delay, and the attenuation, are studied for the various cases of the wave frequency and the altitude.

• Journal of Navigation and Port Research
• /
• v.34 no.4
• /
• pp.299-304
• /
• 2010

In this paper, the EM wave absorber was developed for the 94-GHz detecting radar system. To analysis an EM wave absorber in millimeter wave band, we fabricated three absorber samples using carbon black and titanium dioxide and permalloy with chlorinated polyethylene. After measuring the complex relative permittivity, the absorption characteristics are simulated by 1D FDTD according to different thicknesses of less than 1.0 mm. Then, the EM wave absorber was fabricated based on the FDTD simulation. As a result, the measured results agreed well with the simulated ones, and the developed EM wave absorber with a thickness of 0.7 mm had the desired absorption characteristics of more than 14 dB in the frequency range of the 94-GHz band.

• Journal of information and communication convergence engineering
• /
• v.13 no.1
• /
• pp.36-41
• /
• 2015

With the rapidly increasing and widespread use of electronic and controlling equipment, the control of the electromagnetic (EM) wave environment becomes an important social issue. To solve the electromagnetic compatibility (EMC, both electromagnetic interface and electromagnetic susceptibility) problems, in this paper, we introduce the countermeasure techniques focused on EM wave absorbers for EMC problems in our laboratory at the Korea Maritime and Ocean University. The current technologies related to EM wave absorbers to solve EMC problems will first be described. The prospects of and a design for EM wave absorbers including a smart absorber with a heat radiating function will then be suggested.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.9
• /
• pp.849-854
• /
• 2016

5G New Radio Access Technology(: RAT) is studied by many researchers because the current radio frequency is insufficient to accommodate the increased mobile communication data traffic. However, there are few researches to study on the issue whether the wired mobile network can accommodate the new RAT. Therefore, in the paper, the study on the issue whether the Radio over Fiber(: RoF) system can accommodate the new RATs such as millimeter wave communication, terahertz communication, and optical wireless communication. As a result of the study, only millimeter wave communication deserve to be considered in ten years and even RoF system may not support the increased bandwidth of the millimeter wave communication when beamforming is used.

• Journal of electromagnetic engineering and science
• /
• v.2 no.1
• /
• pp.16-21
• /
• 2002

On the contrary to the progress of the electronic industry and radio communication technologies, many social problems such as EMI, due to unnecessary electromagnetic(EM) wave are serious with the increased use of EM wave. It is required that the absorbing capability of an EM wave absorber is more than 20 dB, the bandwidth of which is required from 30 MHz to 18 GHz to satisfy the international standard about an anechoic chamber for EMI/EMS measurement$^{[1]}$TEX>. However, the absorbing frequency band of the conventional EM wave absorbers satisfying more than 20 dB is very narrow, for examples, from 30 MHz to 400 MHz in ferrite tile type and from 30 MHz to 870 MHz in ferrite grid type, respectively. In this paper, we proposed and designed a new tripe absorber with broadband characteristics covering the frequency band from 30 MHz to 10 GHz by use of the equivalent material constants method (EMCM)$^{[2]~[4]}$TEX>.

• Journal of electromagnetic engineering and science
• /
• v.10 no.1
• /
• pp.13-17
• /
• 2010

In this paper, we have described a simple CPW-fed UWB antenna for wireless UWB communication. The proposed antenna consists of two symmetrical strips having two steps and CPW feeding. Two techniques(symmetrical structure, two steps) are used to produce good low-dispersion and impedance matching. The proposed UWB antenna has an omni directional radiation pattern, compact size, low dispersion, and low cost.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.3
• /
• pp.176-182
• /
• 2009

The dissertation on today information communication technique development consist according to new broadcasting and communication appearanced fusion-service in earnest legislation's change about broadcasting and communication regulate the while separation On that score, radio wave law's change on environment change has been lively producing.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.543-554
• /
• 2022

In this study, the government's investment, laws, regulations, and difficulties related to IoT radio technology in the energy and medical fields are mainly analyzed. Also, plans for dissemination, technology preemption, and commercialization are derived to enhance global competitiveness. Research on ways to secure and predict radio wave application technologies in energy and medical fields, and to alleviate barriers to entry for new business operators. Analyzes the efficiency of support measures using expert groups in each energy and medical field, analyzes the utilization value of accumulated data, and proposes mid- to long-term promotion systems and support measures, as well as utilization measures of data held by external agencies related to radio waves.

• Journal of electromagnetic engineering and science
• /
• v.8 no.2
• /
• pp.64-69
• /
• 2008

In this paper, we have proposed the pattern adjustable base station antenna for WCDMA applications. The proposed antenna consists of an omni-antenna(sleeve monopole) and two movable reflectors. The two reflectors can be controlled by mechanically and used to adjust the horizontal pattern of the base station antenna. The antenna was designed, fabricated, and measured. The antenna covers the entire WCDMA band for VSWR<1.4. The measured antenna gain is more than 15 dBi over the operating frequency range. By changing the angle (a) and the distance (d) of the antenna, the pattern adjustment of the proposed base station antenna is found to be possible.