• 설비공학논문집
• /
• 제6권4호
• /
• pp.399-405
• /
• 1994

Beacuse of the energy resources exhaustion, the aggravating environmental air pollution and the smoke phenomena etc., the importance of clean gas fuel compared with liquid fuel is highly considered in recent years. The combustion system which consists of porous media is actively studied as a new method for solving above problems. Therefore, excess enthalpy combustion using porous media was interested by many researchers and investigated through numerical and experimental analysis. In this study, the simplified combustor has the unique combustion characteristics of mixture gas preheated effect using radiative and convective heat energy by changing the flow passage of unburned gas with solenoid valves and has the intensive excess enthalpy phenomena As the result of according to reduce equivalence ratio, flame temperature was remarkably higher than adiabatic flame temperature. This show the ability of super-lean combustion.

• 한국추진공학회지
• /
• 제3권1호
• /
• pp.41-47
• /
• 1999

고체 추진제의 연소율(burning rate)은 연소의 동적 거동과 추진제의 성능을 판단할 수 있는 중요한 변수이다. 특히 AP계의 고체추진제 표면에서는 발열반응인 분해반응(decomposition) 이외에도 기체로 증발되는 증발반응(evaporation or sublimation)이 존재하므로 이를 고려한 연소 반응율의 해석은 매우 중요한 의미를 갖는다. 본 연구에서는 분해반응과 증발반응이 존재하며 외부로부터 고체추진제 표면으로 입사하는 복사열전달이 있는 경우, 응축영역에서 에너지 방정식과 화학 종 보존식을 사용하여 정상상태의 연소반응율에 관한 이론 해석을 수행하였다.

• 항공우주기술
• /
• 제8권1호
• /
• pp.17-25
• /
• 2009

복사전달식에서 흡수 계수의 정확한 계산은 액체 엔진 저부의 단열재 설계의 입력 값으로 사용되는 플룸의 복사 열전달을 예측하는데 매우 중요하다. 이를 위해서 가스 흡수 계수를 직접 모델링 할 수 있는 WNB 모델을 중요 인자의 선정을 위주로 설명하였고, 그 결과를 비교적 정확한 기준 값을 제공하는 SNB의 결과와 비교하였다. 비교 인자들은 총 방사율, 좁은밴드 복사강도 및 총 복사강도이며, 결과적으로 방사율의 경우 주어진 조건에서 3.1% 이내, 총 복사 강도역시 5%이내의 계산결과를 보여 이 모델의 타당성을 확인할 수 있었다. 추가적으로, 액체 엔진의 연소가스들의 성분비를 예측하고 이 조건에 대한 가스모델링 인자를 계산하여 데이터베이스를 구축하였다.

• 대한기계학회논문집B
• /
• 제25권11호
• /
• pp.1594-1605
• /
• 2001

In this study, a numerical simulation was developed which was capable of predicting the characteristics of NO formation in pilot scale combustor adopting the air-staged burner flame. The numerical calculation was constructed by means of establishing the mathematical models fur turbulence, turbulent combustion, radiation and turbulent nitric oxide chemistry. Turbulence was solved with standard k-$\xi$ model and the turbulent combustion model was incorporated using a two step reaction scheme together with an eddy dissipation model. The radiative transfer equation was calculated by means of the discrete ordinates method with the weighted sum of gray gases model for CO$_2$and H$_2$O. In the NO chemistry model, the chemical reaction rates for thermal and prompt NO were statistically averaged using the $\beta$ probability density function. The results were validated by comparison with measurements. For the experiment, a 0.2 MW pilot multi-air staged burner has been designed and fabricated. Only when the radiation was taken into account, the predicted gas temperature was in good agreement with the experimental one, which meant that the inclusion of radiation was indispensable for modeling multi-air staged gas flame. This was also true of the prediction of the NO formation, since it heavily depended on temperature. Subsequently, it was found that the multi-air staged combustion technique might be used as a practical tool in reducing the NO formation by controlling the peak flame temperature.

• 동력기계공학회지
• /
• 제20권4호
• /
• pp.12-18
• /
• 2016

Typical boiler system consists of combustion chamber and heat exchanger in one housing, therefore the size of boiler system is large and the heat exchanging efficiency becomes low. At these boiler systems, because the combustible mixture fires as free flame in the combustion chamber, consequently the combusted hot gas heats the heat exchanger only as conductive and convective heat transfer. The present Porous Ceramic Burner concept is that combustion process is occurred at the gaps of the porous ceramic materials, and the heat exchanger is placed in the same porous materials. Therefore we can reduce the boiler size, and we can also use radiative heat transfer from ceramic material with conductive and convective heat transfer from combusted gas throwing the porous materials. The purpose of this study is to search the flame stability ranges at different fuel flow rate and excess air ratio burning in the $Al_2O_3$ ceramic balls. We found out the stable excess air ratio range on given combustion intensity. And we can get clean porous ceramic combustion results compared with free flame.

• 한국항공우주학회지
• /
• 제31권8호
• /
• pp.69-76
• /
• 2003

액체로켓 연소기 내의 막냉각 특성 분석을 위한 비회체 분무연소에 대한 수치해석을 수행하였다. 막냉각 연료의 특성에 따른 연소기 벽면의 온도변화를 살펴보기 위하여 막냉각용 연료의 유랑, 막냉각용 액적의 직경, 그리고 공기/연료 혼합비를 매개변수로 한 수치해석을 수행하여 연소기 벽면의 온도는 막냉각용 연료 액적 직경의 변화에는 큰 영향을 받지 않지만 막냉각용 연료 유량 및 공기/연료 혼합비에 영향을 받고 있음을 확인하였다. 또한, 추진기관 벽면으로 전달되는 전도 및 복사열유속을 고찰함으로서 이러한 액체 추진기관의 연소특성을 이해하기 위해서는 열복사 및 물성치의 적절한 고찰이 필요함을 지적하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.101-103
• /
• 2012

Characteristic of aluminum ignition under high temperature and high pressure is studied using lasers. The laser ablation method is used to generate aluminum particles exposed to a high pressure by using a nanosecond pulsed laser where the range of ablation pressure varies between 0.35 and 2.2 GPa. A $CO_2$ laser is used to supply radiative heat to the aluminum target surface for providing high temperature ranging between 5000~9300 Kelvin. The ignition is confirmed using spectroscopy analysis of AlO vibronic band 484 nm wavelength. Also the radiative temperature is measured in various high pressure range for tracing the ignition temperature in high pressure conditions.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.3-9
• /
• 2003

By utilizing a semi-empirical soot model, the applicability of the laminar flamelet concept for simulating the formation and oxidation of soot in the laminar diffusion flame has been studied. The source terms for two transport equations of the soot formation and oxidation are calculated in the mixture fraction/scalar dissipation rate space for laminar flamelets and stored in a library. In this study, emphasis is given to the interaction associated with radiation and soot formation. The radiative heat loss is obtained by solving the radiative transfer equation using the unstructured grid finite volume method with the WSGGM. The calculated temperatures and soot volume fractions agree relatively well with the experimental data and the previous numerical results of Kaplan et al. using the detailed chemistry.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1998년도 제17회 KOSCI SYMPOSIUM 논문집
• /
• pp.165-170
• /
• 1998

Turbulent nonpremixed $H_2$-air jet flames are numerically investigated using the joint PDF model. The reaction progress variable is derived by assuming the radicals 0, H, and OH to be in partial equilibrium and additional species $HO_2$ and $H_2O_2$ in steady state. The model is extended to npnadiabatic flame by introducing additional variable for the transport of enthalpy and radiative source term is calculated using a local, geometry independent model. In terms of flame structure and NO formation, the predicted results are favorably agreed with experimental data. The effects of nonequilibrium chemistry and radiative heat loss on the thermal NO formation are discussed in detail.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.199-204
• /
• 1999

Three dimensional numerical analysis for the turbulent reactive flow and radiative heat transfer in the walking beam type of a reheat furnace in POSCO has been carried out by the industrial code FLUENT. Computations an based on the conservation equations of mass, momentum, energy and species with the $k-{\varepsilon}$ turbulence model and mixture fraction/PDF(Probability Density Function) approach for the combustion rate. Radiative heat transfer is computed by the discrete ordinates radiation model in combination with the weighted-sum-of-gray-gas model for the absorption coefficient of gas medium. The predicted temperture distribution in the reheat furnace and energy flow fractions are in reasonable agreement with the measurement data.