• 한국염색가공학회지
• /
• 제29권1호
• /
• pp.45-54
• /
• 2017

Ultraviolet radiation have much influenced with a deep wrinkles, roughness, laxity of skin damage and pigmentation through oxidative stress and oxidative photo-damage. This study investigates the functional properties of hydrogel facial mask sheets made from agar, Styela clava tunics and Broussonetia papyrifera tunics. The skin of S. clava is covered with a hard cellulose containing glycoprotein, glycosaminoglycan and chondroitin sulfate. B. papyrifera is better known as Paper mulberry. It contains kazinol which serves as a tyrosinase inhibitor and skin whitening agent. The tensile strength of facial mask sheet was measured by universal testing machine, and the water absorption and moisture permeability of facial mask sheet were measured by dryer. Additionally, the DPPH assay and MTT assay were conducted for anti-oxidative activity and cytotoxicity of facial mask sheet. The whitening effect of the facial mask sheet was measured by tyrosinase inhibitor assay. These tests showed that the three ingredients are suitable cosmetic materials. The results reveal that they produce a high quality hydrogel facial mask sheet when the membrane contains 1%(W/V) of agar, 0.1%(W/V) of B. papyrifera tunics and 0.05%(W/V) of S. clava tunics.

• 한국가구학회지
• /
• 제22권1호
• /
• pp.72-81
• /
• 2011

These days, beds have been developed not as furniture to sleep in but Healthcare Furniture. The function of heating, non-electronic-waves and far-infrared rays have been added. Also, eco-friendly materials such as stone, mud, rubber and wood are combined to them together with the radiation-heating method using heat conduction through electronic coil and hot water circulation. Modern people suffer from stress and fatigue. The hot issue is "health." Focused on the health, the development of design for beds considering the influence electronic waves, anions, deep sleep and the density of toxic materials have on human bodies has become urgent. In this study, the trend, specification and efficiency of the functional health-related electronic coil technology are analyzed. Through the analysis, the environmental standards are set. According to them, technology, eco-friendly materials and additional functions for the development of the design are considered. Also, the government is promoting the IEC international standardization for the Korean traditional floor heating style beds. In preparation for that, we adopted new HPT method technology. It enables non-electronic-waves, low electricity and stable temperature maintenance control for the warm top and the cool bottom. Also, the head boards and the frames of the beds can be separated. Through this separation, the beds can be easily moved or installed. Eco-friendly materials such as Hinoki cypress wood and red clay and the existing tables function are combined to the head boards so they can be used as drawers and display shelves. If they are used as separate items, they can be used as covers. This is how we suggest the design for the heating beds.

• 한국해안·해양공학회논문집
• /
• 제20권5호
• /
• pp.491-497
• /
• 2008

수치실험을 통해 파랑과 흐름의 상호작용이 파랑전파방향과 반대방향으로 유출되는 유사제트류에 미치는 영향을 연구하였다. 파랑모형인 REF/DIF S와 흐름모형인 SHORECIRC의 결합모형을 이용하여 수치모의를 수행하였다. 유사제트류의 영향으로 굴절된 파랑은 흐름의 중심영역을 따라 집중화되고 높은 파고를 갖는 파랑에서 유사제트류가 더 일찍 퍼지는 현상이 나타났다. 수치결과로부터 유출구 부근에서 유사제트류 진행의 횡방향으로 급격한 파고변화가 유사제트류를 진행방향 좌우로 퍼지게 하는 데 중요한 역할을 한다는 것을 알 수 있었다. 즉, 흐름의 횡방향으로 작용하는 파잉여응력 기울기항이 흐름의 진행방향으로 작용하여 흐름을 강화시키는 파잉여응력 기울기항보다 유사제트류에 더 큰 영향을 미치게 된다. 결론적으로 하구에서처럼 흐름과 반대방향으로 입사하는 파랑이 있는 곳에서는 파랑과 흐름사이의 상호영향이 반드시 고려되어야 한다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
• /
• pp.85-94
• /
• 2002

Computational flow dynamics(CFD) has been frequently applied to the waste incinerators to understand the flow performance for various design and operating parameters. Though it needs many simplifications and complicated flow models, the reasonability of its results is not fully evaluated. For example, the inlet condition is calculated from an arbitrarily assumed properties of combustion gas release from the waste bed, since the combustion in the bed is difficult to be predicted. In this study, the computational modeling and calculation procedures of CFD for the grate type waste incinerator were evaluated using comparative simulations. Though the assumption method on the generation of the combustion gas directly affected the temperature and gas species concentrations, the overall flow pattern was dominated by the secondary air jets. The gaseous reaction could be included by assuming the release of the products of incomplete combusion from the bed. However, the reaction effficiency cannot not be directly evaluated from the species concentration, since it is not possible to simulate the actual co-existence of fuel rich or oxygen rich puffs over the bed. In predicting the turbulence, the higher order model, such as Reynolds stress model, gave difference shape of local recirculation zones, but similar results was acquired from the standard $k-{\varepsilon}$ model. Introducing radiation model was required for accurate temperature prediction, but it also caused heat imbalance due to the fixed temperature of the inlet, i.e. the waste bed. Thus, the computational modeling procedures on incinerators and the analysis of the predicted results should be progressed carefully. Though not validated experimentally, current simulation method is capable of comparative evaluation on the flow-related parameters such as the furnace shape and secondary air injection using identical inlet conditions. Quantitative analysis using measures of the residence time and mixing is essential to compare the flow performance efficiently.

• The Korean Journal of Physiology and Pharmacology
• /
• 제14권3호
• /
• pp.157-161
• /
• 2010

Heat shock proteins (HSPs) are specifically induced by various forms of stress. Hsp70.1, a member of the hsp70 family is known to play an important role in cytoprotection from stressful insults. However, the functional role of Hsp70 in motor function after spinal cord injury (SCI) is still unclear. To study the role of hsp70.1 in motor recovery following SCI, we assessed locomotor function in hsp70.1 knockout (KO) mice and their wild-type (WT) mice via the Basso, Beattie and Bresnahan (BBB) locomotor rating scale, before and after spinal hemisection at T13 level. We also examined lesion size in the spinal cord using Luxol fast blue/cresyl violet staining. One day after injury, KO and WT mice showed no significant difference in the motor function due to complete paralysis following spinal hemisection. However, when it compared to WT mice, KO mice had significantly delayed and decreased functional outcomes from 4 days up to 21 days after SCI. KO mice also showed significantly greater lesion size in the spinal cord than WT mice showed at 21 days after spinal hemisection. These results suggest that Hsp70 has a protective effect against traumatic SCI and the manipulation of the hsp70.1 gene may help improve the recovery of motor function, thereby enhancing neuroprotection after SCI.

• 대한치과마취과학회지
• /
• 제10권1호
• /
• pp.20-26
• /
• 2010

This type of neuropathic pain(atypical odontalgia) is seen most often in middle-aged women or men after dentoalveolar operation. Atypical odontalgia probably is caused by deafferentation leading to intraneural changes in the medullary dorsal horn. Treatment of this problem is difficult, but some success has been reported in uncontrolled, open-labeled studies using high doses of tricyclic antidepressants. This is the management report of a patient case, that had a neuropathic atypical odontalgia recognized with the right maxillary lateral incisor. The patient was consulted to the Department of Pain Clinics, ENT & Neurology and diagnosed the adenoid cystic carcinoma on left cerebellum and right paranasal sinus with extension to the cavernous sinus. In spite of the osteoplastic craniotomy, neurosurgical mass removal and radiation therapy were done with chemotherapy, atypical odontalgia was continued. In addition to the consultation to Psychology, stress management and antidepressant medication were done and improved slowly.

• Earthquakes and Structures
• /
• 제18권1호
• /
• pp.73-82
• /
• 2020

With the coal mining depth increasing, both stress and gas pressure rapidly enhance, causing coal and gas outburst risk to become more complex and severe. The conventional method for prediction of coal and gas outburst adopts one prediction index and corresponding critical value to forecast and cannot reflect all the factors impacting coal and gas outburst, thus it is characteristic of false and missing forecasts and poor accuracy. For the reason, based on analyses of both the prediction indicators and the factors impacting coal and gas outburst at the test site, this work carefully selected 6 prediction indicators such as the index of gas desorption from drill cuttings Δh₂, the amount of drill cuttings S, gas content W, the gas initial diffusion velocity index ΔP, the intensity of electromagnetic radiation E and its number of pulse N, constructed the Bayes discriminant analysis (BDA) index system, studied the BDA-based multi-index comprehensive model for forecast of coal and gas outburst risk, and used the established discriminant model to conduct coal and gas outburst prediction. Results showed that the BDA - based multi-index comprehensive model for prediction of coal and gas outburst has an 100% of prediction accuracy, without wrong and omitted predictions, can also accurately forecast the outburst risk even for the low indicators outburst. The prediction method set up by this study has a broad application prospect in the prediction of coal and gas outburst risk.

• 한국방사선학회논문지
• /
• 제14권4호
• /
• pp.391-396
• /
• 2020

본 연구는 Gd₂O₂S:Tb 형광체 화합물을 사용하여 비파괴검사 중 방사선투과검사에 적용할 수 있는 형광체 증감지를 개발하였다. 또한 이러한 형광체 증감지를 FE-SEM, RMS 및 RDS 분석을 통해 형광체 증감지의 영상 균일도를 분석하였다. 또한, 응력-변형 특성 곡선 측정을 통해 Gd₂O₂S:Tb 형광체 스크린의 인장강도, 신장률 및 탄성계수를 평가하였다. 실험 결과, RSD 값이 평가 기준인 10% 이내로 우수한 영상균일도를 가지는 것으로 평가되었다. 또한, 물리적 특성 평가 결과, 인장 강도는 1.1760 N/㎟이며, 파단시 인장강도는 1.1515 N/㎟로 나타났다. 이러한 결과로부터 본 연구에서 제작된 상온 겔-프린팅 제조법을 이용하여 제작된 Gd₂O₂S:Tb 형광체 스크린은 방사선 투과검사용 디지털 방사선 검출기에 적용이 가능할 것으로 사료된다.

• 한국유체기계학회 논문집
• /
• 제10권5호
• /
• pp.54-63
• /
• 2007

A barrel is a high length-to-diameter ratio cylinder that is influenced by environmental factors such as sunlight, precipitation, wind and clouds. Cross-barrel temperature differences caused by uneven heating or cooling lead to thermal deformation that degrades accuracy. Therefore, a barrel is covered by thermal shrouds to minimize the type of thermal deformation, "fall-of-shot". In this paper, an analytical and experimental study is presented to design the thermal shrouds for a gun barrel and to evaluate the thermal shroud effect. First, an analytical study on the thermal shroud effect to minimize thermal deformation of a gun barrel by sunlight and wind is performed. The coupled analysis of thermal fluid dynamics of the air flow between a barrel and thermal shrouds and thermal stresses of a barrel Is performed to clarify both the thermal shroud effect and the drift in gun muzzle orientation by thermal deformation. Second, experiments are carried out to test and evaluate the thermal shroud effect on the performance of a gun barrel. The drift in gun muzzle orientation against the solar radiation is confirmed by the experiments, and the results well agree with the analytical estimation. Third, three principal design factors that are presumed to have an effect on the performance of the thermal shrouds are also analyzed; sorts of shroud materials, wall-thickness of thermal shrouds, and distance of the gap between a barrel and thermal shrouds.

• Journal of Ginseng Research
• /
• 제30권3호
• /
• pp.106-111
• /
• 2006

Adverse changes in individual's biochemistry under heavy metal stress are directly linked with its metabolic activity and health status. The present investigation highlights the differences in protecting role of Panax ginseng extract against mercuric chloride induced alterations in serum proteins. The assessment was based on dividing fifty albino rats into two sets, one for acute and the other for sub-acute study. All the sets had five groups with five albino rats in each i.e. control group, mercuric chloride treated group, Panax ginseng extract treated group, mercuric chloride followed by Panax ginseng extract treated group and Panax ginseng extract followed by mercuric chloride treated group. Mercuric chloride was given orally 0.926 mg/kg body weight for acute set and 0.044 mg/kg body weight for sub-acute set after LD50 (9.26 mg/kg body weight) determination by probitt analysis. 10 mg/kg body weight Panax ginseng extract was given in both acute and sub-acute sets after incorporating safety trials. The control group received tween-20 and distilled water only. The result exhibited significantly reduction (P<0.01) in serum protein, albumin and globulin following mercuric chloride intoxication whereas significant (P<0.01) enhancement in other groups with Panax ginseng extract as an ingredient confirming its protective role. All serum samples were also electrophoresed in 10% SDS with standard marker using discontinuous buffering system. Gradual disappearance of alpha-2 and beta-1 globulin bands from electrophoretic pattern was observed, while a single sharp band was observed between beta-2 and gamma globulin in serum protein pattern of acutely mercuric chloride treated rats. However, this band could not be visualized in sub-acute studies. Panax ginseng extract exhibits a better protection after acute intoxication.