• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.52.1-52.1
• /
• 2014

Radio pulsars are highly magnetized, rapidly rotating neutron stars that emit synchrotron radiation along the magnetic axes at their spin frequencies. Traditionally, pulsar observations have been done at low frequencies (MHz up to a few GHz), since radio pulsar spectrum is known to a power-law with a steep negative spectral index. More recently, high-frequency pulsar observations (several GHz and above) have been made as a broadband spectrometer and fast computers became available. High-frequency pulsar observations will provide information on radio emission mechanism of pulsars in the vicinity of the neutron star surface. There is also huge interest from gravitational-wave and astrophysics community to find a pulsar in the center of our Galaxy. The Korean VLBI Network has three 21-m single dishes in the Korean peninsula. Using KVN's lowest observational frequency of 22-GHz, we performed test observations with the KVN targeting a few selected known, bright pulsars. In addition, we have been developing pulsar pipelines that can be utilized with a VLBI facility using Mark-V. We present a brief introduction of radio pulsars and show data obtained with the KVN.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.6
• /
• pp.440-450
• /
• 2016

The capsizing and consequent sinking of a coastal car ferry was recently reported, with numerous human casualties. The primary cause was determined to be a sudden turn with improperly stowed and secured cargo. Part I of this study introduces how long term acceleration components are determined from seakeeping analyses. A carferry with a displacement of 1,633 tonf was selected as the target vessel. Sea data that included the significant wave heights and periods were collected at four observation buoys, some of which were far away from two main voyage routes: Incheon-Jeju and Pusan-Jeju. Frequency response analyses were performed to obtain the linearized radiation force coefficients, hydrostatic stiffnesses, and wave excitation forces. Time response analyses were sequentially performed to produce the motion-induced acceleration processes. The probabilistic distributions of the acceleration components were determined using a peak and valley counting method. Long term extreme acceleration components were proposed as a final result.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.12
• /
• pp.1864-1871
• /
• 2012

This paper proposes the hybrid proportional integral(HBPI) controller for maximum power point tracking(MPPT) control of photovoltaic system. The output characteristics of the solar cell are a nonlinear and affected by a temperature, the solar radiation and influence of a shadow. The MPPT control is a very important technique in order to increase an output and efficiency of the photovoltaic system. The conventional constant voltage(CV), perturbation and observation(PO) and incremental conductance(IC) are the method which finding maximum power point(MPP) by the continued self-excitation vibration, and uses the fixed step size. If the fixed step size is a large, the tracking speed of maximum power point is faster, but the tracking accuracy in the steady state is decreased. On the contrary, when the fixed step size is a small, the tracking accuracy is increased and the tracking speed is slower. Therefore, in order to solve these problems, this paper proposes HBPI controller that is adjusted gain of conventional PI control using fuzzy control, and the maximum power point tracks using this controller. The validity of the controller proposed in this paper proves through the results of the comparisons.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.26 no.2
• /
• pp.45-63
• /
• 1996

In attempt to determine radiation effect on the mandibular condyle of the growing rat, 27 white female rats (Sprague-Dawley) were divided into 3 groups and irradiated respectively 5Gy, 10Gy, 20Gy using MK Cell Irradiator. Mandibular condyles from rats on the day of 1, 7, 14 after the irradiation day were obtained, sectioned sagittally and examined by light microscopy, and thereafter middle portion through anteroposterior direction on the sagittal plane was selected to examine the ultrastructural change by transmission electron microscopy. The obtained results are followings. 1. In the proliferative zone some cells showed little organelles in case of 5Gy irradiation, in addition the number of degenerative cells increased and in case of 10Gy irradiation, and in case of 20 Gy irradiation total number of cells decreased. 2. In the hypertrophic zone, narrowing of width and partial disorder in hypertrophic process were noted in case of 5 Gy irradiation, and more prominent narrowing of width and more irregular disorder in hypertrophic process in case of both 10Gy and 20Gy irradiation. 3. In the upper hypertrophic zone some chondrocytes seemed to be dying and the polarity of nuclei could not be seen, if any. 4. The periodic observation showed the severest change at day 7 and the signs of recovery at day 14 after irradiation.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.238.2-238.2
• /
• 2012

We report the results of KVN-VERA('KAVA'; KVN and VERA Arrary) AGN WG test observation in 2011 and 2012. The results from these commisioning years show that 'KAVA' is able to produce noble images of radio loud AGNs at 22 and 43GHz. This dedicated high frequency VLBI facility will be especially competitive for the regions where conventional low freuquency facilities see the optically thick part of synchrotron radiation. In the second part of this talk, we report the early science activities of the AGN WG. Sgr A*, Jet acceleration zone of M87, extremely young radio galaxies are the prime cadidates of the joint activities. Lastly we will stress how the phase-referencing 'KAVA' does enhance the imaging sensitivity and open new era of VLBI AGN researches.

• Journal of Conservation Science
• /
• v.7 no.2
• /
• pp.45-53
• /
• 1998

The Kong-Chung Jung's relics made of wooden materials were pre-examined for conservation. Kong-Chung Jung was a General of the Chosun Dynasty and his weapons were made of wood. The pre-examining method was focused on the quality and species of the wooden weapons. X-ray radiation was used for the observation of wood structure, and the condition of the relics was relatively good although they contained some cracks. The examination of species using optical microscope showed that the species of each relics were Pinus densiflora of hanging scroll pole, Lozoste lancifolia of a top of flagnole, Fraxinus sp. of a flagpole, Phyllostachys sp. of arrow shafts. For the conservation of the relics, celyl alcohol as dimensional stability chemicals was used and poly(vinyl acetate) and epoxy adhesives were also used for the joining and restoring of the relics.

• Journal of Satellite, Information and Communications
• /
• v.8 no.2
• /
• pp.74-79
• /
• 2013

For the purpose of drawing out a requirements (draft) for the development of low Earth orbit meteorological satellite payload, the present development situation of the foreign low Earth orbit meteorological satellite payload was analyzed, and survey and analysis on the questionnaire of the low Earth orbit meteorological satellite payload users' requirements were carried out. Through this research, some key required performance specifications (draft) were made on the basis of technological requirements such as frequency, radiation measurement, spacial, and antenna efficiency requirements, and the low Earth orbit meteorological satellite payload users' requirements.

• Korean Journal of Remote Sensing
• /
• v.14 no.3
• /
• pp.307-314
• /
• 1998

To examine the detectability of the yellow sand and/or aerosol from China crossing over the Yellow Sea within the range of OSMI wavelengths(400-900 nm), we have investigated the optical characteristics of aerosols in yellow sand events observed on April, 1998 in Seoul. The spectral reflectance(%) and aerosol optical thickness in the range of Visible(VIS) and near Infrared (NIR) wavelengths were derived from the measurements of solar radiation using the GER-2600 spectroradiometer and sunphotometer during the April, 1798. The average spectral reflectance for the yellow sand events is over 40% and higher around 14:30 than 12:00 LST, but that for clear days is about 20% both at 12:00 and 14:30 LST in the range of 500-900 nm. The aerosol optical thickness at 501 nm varied from 0.25 on very clear day to 1.01 during a so-called "yellow-sand" episode and that for 673 nm varied from 0.14 to 0.92, respectively.

• Journal of Environmental Science International
• /
• v.31 no.1
• /
• pp.43-50
• /
• 2022

In this paper, lysimeter was installed to analyze the moisture fluctuations on the surface of a forest. The weight of the soil was measured, and the moisture fluctuations were calculated through the difference in weight over time. The amount of dew condensation on the surface of the ground was about 2-7 mm. January experienced the most dew condensation (7.2 mm). It was found that about 43 mm of dew condensation was generated over one year. To analyze the characteristics of evapotranspiration in the forest, the evapotranspiration on the surface was measured by the lysimeter method and the evapotranspiration on the upper part of the canopy was measured by the eddy covariance method. These results were compared and analyzed. Until mid-October, the evapotranspiration of the forest was active, and the amount of evapotranspiration on the top of the canopy was higher than the amount on the surface. Thereafter, the amount of evapotranspiration on the top of the canopy decreased due to the lowering of temperature and net-radiation. The amount of evapotranspiration on the surface and above the canopy showed the same tendency.

• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.498-505
• /
• 2024

In this paper, a cable-driven endoscopic manipulator (CEM) is designed for the Chinese latest compact fusion reactor. The whole CEM arm is more than 3000 mm long and includes end vision tools, an endoscopic manipulator/control system, a feeding system, a drag chain system, support systems, a neutron shield door, etc. It can cover a range of ±45° of the vacuum chamber by working in a wrap-around mode, etc., to meet the need for observation at any position and angle. By placing all drive motors in the end drive box via a cable drive, cooling, and radiation protection of the entire robot can be facilitated. To address the CEM motion control problem, a discrete trajectory tracking method is proposed. By restricting each joint of the CEM to the target curve through segmental fitting, the trajectory tracking control is completed. To avoid the joint rotation angle overrun, a joint limit rotation angle optimization method is proposed based on the equivalent rod length principle. Finally, the CEM simulation system is established. The rationality of the structure design and the effectiveness of the motion control algorithm are verified by the simulation.