• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.186-190
• /
• 2014

Nuclear Power Plants require the control ability of chemical condition (pH) because pH control during transient accident such as LOCA makes an able the fission product removal capability to be maintained, stress corrosion cracking of stainless steel equipment to be prevented and the production of hydrogen by aluminum and zinc to be minimized. An NPP is designed to control the pH of containment spray and sump coolant using the spray additives 30% NaOH in the event of loss of coolant accident. In this paper, the pH of sump coolant of an NPP during LOCA was analyzed and the fission products removal constant and decontamination factor were calculated according to Standard Review Plan 6.5.2 related to spray chemical conditions of pH. The calculated pH value of recirculation mode using the computer code corresponds to 8.09~9.67, which meets the chemical environment regulation requirements. The fission product removal capability caused by containment spray system is performed to provide input to radiation analysis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.5 s.96
• /
• pp.501-510
• /
• 2005

In this paper, the miniaturized linear and circular polarization microstrip antennas are designed and fabricated at the resonant frequency of 1.575 GHz. To miniaturize the microstrip patch antenna(MPA), the 'L' type plates are attached under the rectangular microstrip patch. In case of the linear polarization, the size of the microstrip antenna attached the 14 plates is reduced to $67.9\%(47mm{\times}47mm)$ compared with general $MPA(83mm{\times}83mm)$. The return loss and -10 dB bandwidth are -34.4 dB and 49 $MHz(3.1\%)$. And the radiation pattern is broad through the size reduction of the patch. Also in case of the circular polarization, the size of the microstrip antenna with 13 plates is reduced to $54.6\%(53mm{\times}54mm)$ compared with the general $MPA(76mm{\times}83mm)$. The axial ratio is 1.37dB at 1.575 GHz, the 2 dB axial ratio bandwidth is 14 $MHz(0.8\%)$. As that result, we could confirm that 3-dimensional structure with attached 'L' shaped plate is proper form for the miniaturization of linear and circular polarization microstrip antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.253-260
• /
• 2016

This paper proposes a planar Log-Periodic Dipole Array(LPDA) antenna with light-weight supporting structure for installing on an aircraft. The proposed antenna is designed by applying a planar skeleton supporting structure that has light-weight for an aircraft and is capable of withstanding structural vibration. The material of the planar skeleton supporting structure is a Polyether ether ketone(Peek) which has excellent characteristics on strength and temperature. The proposed antenna is fabricated by attaching the radiating elements of the LPDA on both sides of the supporting structure. The changed input impedance due to the dielectric material of the supporting structure was compensated for by controlling the distance and length of several radiating elements. The 10-dB return loss bandwidths of the designed planar LPDA antenna with light-weight supporting structure are obtained as 0.4~3.1 GHz(7.3:1) in the simulation and 0.41~3.5 GHz(8.2:1) in the measurement. The average gains in 0.5~3 GHz band are 6.77 dBi in the simulation and 6.55 dBi in the measurement. Therefore, we confirm that the designed antenna is appropriate to be installed on an aircraft due to its light-weight structure and wideband directional radiation characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.476-482
• /
• 2006

In this paper, a multimode feed horn antenna is suggested for a high power microwave(HPM) antenna system. The proposed HPM feed horn antenna which is connected with a mode converter is located between source and reflector antenna. A multimode feed horn antenna which has reduced -25 dB beamwidth is designed and fabricated for miniaturization of reflector antenna because -25 dB beamwidth which is determined by considering spillover of feed horn antenna decides a size of reflector in case of HPM. As a result, feed system which uses the multimode feed horn antenna has high gain about 27 dBi and return loss is less than -22 dB at 10 GHz. The measured -25 dB beamwidths of the radiation pattern at vertical, horizontal-plane equal to $20.24^{\circ},\;28.92^{\circ}$ which is less than about $10^{\circ}$ beamwidth of conventional feed system. Thus the suggested feed hem antenna is suitable to feed horn for miniaturization of HPM antenna system.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.1
• /
• pp.41-49
• /
• 2014

This study spatially assesses the impact of trees on residential rooftop solar energy potential using urban three-dimensional models derived from Light Detection and Ranging(LiDAR) data in San Francisco, California. In recent years on-site solar energy generation in cities has become an essential agenda in municipal climate action plans. However, it can be limited by neighboring environments such as shade from topography, buildings and trees. Of all these effects, the impact of trees on rooftop photovoltaics(PVs) requires careful attention because improper situation of solar panels without considering trees can result in inefficient solar energy generation, tree removal, and/or increasing building energy demand and urban heat island effect. Using ArcMap 9.3.1, we calculated the incoming annual solar radiation on individual rooftops in San Francisco and the reduced insolation affected by trees. Furthermore, we performed a multiple regression analysis to see what attributes of trees in a neighborhood(tree density, tree heights, and the variance of tree heights) affect rooftop insolation. The result shows that annual total residential rooftops insolation in San Francisco is 18,326,671 MWh and annual total light-loss reduction caused by trees is 326,406 MWh, which is about 1.78%. The annual insolation shows a wide range of values from $34.4kWh/m^2/year$ to $1,348.4kWh/m^2/year$. The result spatially maps the locations that show the various levels of impact from trees. The result from multiple regression shows that tree density, average tree heights and the variation of tree heights in a neighborhood have statistically significant effects on the rooftop solar potential. The results can be linked to municipal energy planning in order to manage potential conflicts as cities with low to medium population density begin implementing on-site solar energy generation. Rooftop solar energy generation makes the best contribution towards achieving sustainability when PVs are optimally located while pursuing the preservation of urban trees.

• Journal of the Korean Society of Radiology
• /
• v.12 no.4
• /
• pp.497-503
• /
• 2018

The purpose of this study was to investigate the degree of image degradation and the improvement of image quality caused by the density difference between the orthodontic filling material and the surrounding anatomical structure during the examination of the facial CT by quantitative and qualitative analysis. The teeth were scanned using 64-MDCT (Discovery 750 HD, GE HEALTH CARE, Milwaukee, USA). The teeth were scanned and compared according to tube voltage, silicone application, and MAR application. As a result, 10.36% CT value decreased at 140 kVp and 5.81% decrease at the application of silicon material. As a result of the qualitative evaluation, it was evaluated that 7 of the 10 observers and 3 of the acceptors were applied to the MAR algorithm. Therefore, it is possible to reduce the unnecessary burden on the radiation exposure dose as well as to reduce the loss of image data by reducing the high density artifacts, as well as the inspection parameters used in the current clinical application and various algorithms that can reduce the high density artifacts. It can be expected to provide a lot of image information.

• Journal of the Korean Institute of Gas
• /
• v.22 no.2
• /
• pp.59-66
• /
• 2018

Using hydrogen fuel is expected to be suitable as a reciprocating internal combustion engine with heightened interest in HALE(High Altitude Long Endurance) UAV(Unmanned Aerial Vehicle). Hydrogen is hightest energy density per mass so it can continue to charge for long periods of time and have positive part of the environmental effects. However, it is estimated that there is less research on hydrogen fuel engine currently applied, and many studies need to be done. Depending on the operation, there are factors that result in supercooling due to reduced radiation or reduce cooling performance due to low air density. Therefore, the experiment was to change the temperature of the cooling water and investigate the effect on engine combustions. The limitation of the stable operation range due to backfire is dominated by the excess air ratio rather than the effect of the cooling water temperature change. When the cooling water temperature increases, the volumetric efficiency decreases and the torque decreases. As the cooling water temperature decreases, the heat loss was increased and consequently the thermal efficiency was decreased.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.10
• /
• pp.1316-1321
• /
• 2000

Objectives : The authors analyzed the surgical series of Cushing's disease to evaluate the proper treatment policy and to verify the possible prognostic factors. Material and Methods : Of 50 patients diagnosed as Cushing's disease and operated at Department of Neurosurgery of our institute between 1988 and 1999, 48 patients with available medical records were analyzed retrospectively. Mean follow-up period was 48 months(3 to 109 months). Preoperative diagnosis was made after evaluating the patients with multiple-stage endocrinological studies and 31 selective patients were evaluated with inferior petrosal sinus sampling(IPSS). Magnetic resonance imaging(MRI) and/or high resolution computerized tomography(CT) was done in all patients. A total of 51 transsphenoidal adenomectomy(TSA) were performed including 3 revision for initial surgical failure cases. Remission was decided on the basis of both endocrinological criteria and clinical status. Radiation and/or ketoconazole therapy were applied to failed cases. For the verification of prognostic factors, the authors evaluated the statistical significance of multiple variables over remission rate by chi-square test. Result : Sensitivity of IPSS for central localization was 93.5% which was better than that of MRI(87.5%). But for lateralization, it was 72.4% for IPSS versus MRI 90.5%. Success rate of TSA was 82%(42/51) and recurrence rate was 9%(4/48). When including adjuvant treatments for surgically failed cases, overall success rate was 89.6% and all of 3 reoperated cases(TSA) due to recurrence were successful. Significant complication occurred in 7.8%(4/51) after TSA including hypopituitarism, diabetes insipidus, and visual loss. Non-existence of tumor in MRI and prolonged symptom duration(>3 years) were significant prognostic factors. Conclusion : TSA can be considered as initial treatment for Cushing's disease. In surgically failed cases, multiple treatment modality may improve the overall outcome and repeated TSA for recurrent cases seem to provide similar success.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.5
• /
• pp.627-632
• /
• 2007

FoxO1, FoxO3a and FoxO4 belong to the FoxO gene family, which play important roles in the PI3K/PKB pathway. In this study, we cloned the porcine FoxO1, FoxO3a and FoxO4 sequences and assigned them to SSC11p11-15, SSC1p13 and SSC xq13 using somatic cell hybrid panel (SCHP) and radiation hybrid panel (IMpRH). RT-PCR results showed that these three genes are expressed in multiple tissues. Sequencing of PCR products from different breeds identified a synonymous T/C polymorphism in exon 2 of FoxO3a. This FoxO3a single nucleotide polymorphism (SNP) can be detected by AvaII restriction enzyme. The allele frequencies of this SNP were investigated in Dahuabai, Meishan, Tongcheng, Yushan, Large White, and Duroc pigs. Association of the genotypes with growth and carcass traits showed that different genotypes of FoxO3a were associated with carcass length and backfat thickness between 6th and 7th ribs (BTR) and drip loss (p<0.05).

• Journal of Korean Neurosurgical Society
• /
• v.30 no.3
• /
• pp.334-341
• /
• 2001

Objective : We have currently changed treatment strategies to methotrexate(MTX)-based preirradiation chemotherapy with subsequent planned radiation for the initial therapy of primary central nervous system lymphoma (PCNSL). The aim of this study was to evaluate the results of treating PCNSL with chemotherapy plus radiotherapy (CRT) or radiotherapy(RT) alone. Method and Material : This study involved 10 females and 3 males patients with a mean age of 54.2 years. All patients underwent surgery, open(8 cases) or stereotactic biopsy(5 cases) for histological diagnosis. Eleven tumors were diffuse large B-cell lymphomas. Tumor volume change in the follow-up images and survival time were evaluated in patients treated with CRT and RT alone. In the beginning, two patients received ProMACE-Cytabom chemotherapeutic regimen, but did not complete the course and died of progressive tumor 8 and 9 months after diagnosis, respectively. One patient died at 6 months before chemotherapy. These three were excluded from the survival analysis. Five patients(RT group) completed full courses of cranial irradiation with or without boost. For the current combined modality treatment, high-dose MTXbased chemotherapy(systemic and intrathecal MTX, IV vincristine, and oral procarbazine) followed by whole brain irrdiation to 45Gy to tumor was introduced in 5 patients of CRT group. Result : A complete response was achieved in three of five who received RT only and in all of five who received CRT. All patients in CRT groups are in disease free status at a mean 23 months following therapy. The RT group patients refused any additional salvage therapy at tumor relapse and survived at mean 20 months from diagnosis. The Karnofsky performance status improved in eight of ten patients with treatment. The treatment toxicity included leukoencephalopathy in RT group and severe leukopenia, transient hepatitis, avascular necrosis of femoral head, hearing loss, and amenorrhea in CRT group, respectively. Conclusion : The combined modality therapy of MTX-based chemotherapy plus radiotherapy for PCNSL may enhance tumor response and improve patient survival. The patients who received CRT should be carefully followed up because of the higher risk of treatment-induced late neurotoxicity.