• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2579-2585
• /
• 2022

Ceramics of quaternary garnets (Gd,Y)₃Al₂Ga₃O₁₂ doped with Ce, Tb have been fabricated and evaluated as prospective materials for indirect energy converters of α-and β-voltaic. Samples were characterized at excitation with an X-ray source and an intense 150 keV electron beam and showed good temperature stability of their emission and tolerance to irradiation. The role of X-rays accompanied the α-particle emitting in the increase of the conversion efficiency is clarified. The garnet-type structure of the matrix in the developed materials allows the production of quality crystalline mass with a light yield exceeding that of the commonly used YAG: Ce scintillator by a factor of two times.

• 한국식품저장유통학회지
• /
• 제24권1호
• /
• pp.27-35
• /
• 2017

본 연구는 면역저하 환자용 신선편의 채소류의 위생화를 위해 당근, 오이고추, 방울토마토, 파프리카를 모델식품으로 선정하여 다양한 흡수선량으로 엑스선 조사처리한 후 미생물학적, 이화학적, 관능적 품질 평가를 수행하였다. 당근과 오이고추의 경우 0.4 kGy, 방울토마토와 파프리카의 경우 0.2 kGy 이상의 흡수선량으로 엑스선 조사처리 시 멸균이 확인되었으며, 총 호기성세균 및 대장균군을 제외한 병원균들은 1 log 수준의 검출한계 이하로 나타났다. 모델식품에 접종된 E. coli. L. monocytogenes, S. Typhimyrium에 대한 엑스선의 D10값은 0.11-0.32 kGy로 나타나, 0.4 kGy의 흡수선량을 신선편의 채소류의 멸균을 위한 잠정적인 최소 흡수선량으로 설정하였다. 최대 0.6 kGy의 흡수선량으로 엑스선 조사처리된 신선편의 채소류에 대한 전체 선호도의 경우 7점 척도에서 모두 5.0 점 이상으로 나타나 이들의 관능적 품질이 수용 가능한 수준인 것으로 판단하였다. 또한, 암환자를 대상으로 엑스선 멸균처리(0.4 kGy)된 신선편의 채소류에 대한 선호도 설문조사에서 오이고추와 방울토마토, 파프리카의 경우 모든 항목에 대한 평균 선호도 점수는 5점 척도에서 모두 4.0점 이상으로 나타났다. 따라서 엑스선으로 멸균처리된 오이고추, 방울토마토, 파프리카는 면역력이 저하된 환자들을 위한 위생학적으로 안전한 신선편의 채소로 제공이 가능할 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.2000-2010
• /
• 2021

Mechanical moduli, such as Young's modulus (E), Bulks modulus (B), Shear modulus (S), longitudinal modulus (L), Poisson's ratio (σ) and micro Hardness (H) were theoretically calculated for (100-x)TeO₂+x MgO glasses, where x = 10, 20, 30, 40 and 45 mol%, based on the Makishima-Mackenzie model. The estimated results showed that the mechanical moduli and the microhardness of the glasses were improved with the increase of the MgO contents in the TM glasses, while Poisson's ratio decreased with the increase in MgO content. Moreover, the radiation shielding capacity was evaluated for the studied TM glasses. Thus, the linear attenuation coefficient (LAC), mass attenuation coefficient (MAC), transmission factor (TF) and half-value thickness (𝚫_0.5) were simulated for gamma photon energies between 0.344 and 1.406 MeV. The simulated results showed that glass TM10 with 10 mol % MgO possess the highest LAC and varied in the range between 0.259 and 0.711 cm^-1, while TM45 glass with 45 mol % MgO possess the lowest LAC and vary in the range between 0.223 and 0.587 cm^-1 at gamma photon energies between 0.344 and 1.406 MeV. Furthermore, the BXCOM program was applied to calculate the effective atomic number (Z_eff), equivalent atomic number (Z_eq) and buildup factors (EBF and EABF) of the glasses. The effective removal cross-section for the fast neutrons (ERCSFN, ∑_R) was also calculated theoretically. The received data depicts that the lowest ∑_R was achieved for TM10 glasses, where ∑_R = 0.0193 cm² g^-1, while TM45 possesses the highest ERCSFN where ∑_R = 0.0215 cm² g^-1.

• Tribology and Lubricants
• /
• 제16권1호
• /
• pp.15-21
• /
• 2000

Radiation of Nd-YAG laser changes and refines the surface microstructure of steels, which gives rise to enhancement of hardness and resulting wear resistance. In the present work, the effect of processing parameters during the surface modification with laser on the wear behavior of the SM45C steel was studied by means of wear testing. The counter material was alumina ceramics. The microstructure observation revealed the dependence of molten depth and width on the defocusing distance. The laser modification of steel surface give rise to improved wear resistance in the testing speed range of either <0.2 m/s or >0.9 m/s Material transfer from steel was wear observated the surface of counter material when testing speed was lower than 0.7 m/s.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.484-487
• /
• 2018

5 MeV proton-irradiation with total dose of $10^{15}/cm^2$ was performed on AlGaN/GaN-on-Si high electron mobility transistors (HEMTs) with various gate metals including Ni, TaN, W, and TiN to investigate the degradation characteristics. The positive shift of pinch-off voltage and the reduction of on-current were observed from irradiated HEMTs regardless of a type of gate materials. Hall and transmission line measurements revealed the reduction of carrier mobility and sheet charge concentration due to displacement damage by proton irradiation. The shift of pinch-off voltage was dependent on Schottky barrier heights of gate metals. Gate leakage and capacitance-voltage characteristics did not show any significant degradation demonstrating the superior radiation hardness of Schottky gate contacts on GaN.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.763-766
• /
• 2000

The Rapid Prototyping and Tooling technology has been developed. However, most commercial ones currently use resins or waxes as the raw materials. These days. the direct metal deposition methods are researched as a true rapid prototyping and tooling technology. A fundamental study on rapid prototyping and tooling with wire welding technology using $CO_2$ laser radiation was carried out in this paper. The main focus is to develop a simple commercial rapid prototyping and tooling system with the exiting laser welding technology. The process is investigated as a function of laser parameters and process variables. Basic parts were fabricated as out-put and their microstructure, hardness and tensile strength are examined for the reliability. In addition, Its advantages and disadvantages are discussed as a rapid prototyping and tooling system.

• 한국공작기계학회논문집
• /
• 제17권3호
• /
• pp.108-114
• /
• 2008

Uniaxial tension and compression test were conducted on conventional and crosslinked ultra-high molecular polyethylene (UHMWPE) all prepared from the same lot of medical grade GUR 1050. The conventional materials were unirradiated and gamma irradiated with $25kGy{\sim}200kGy$. Gamma irradiated processing was found to significantly impact the crystallinity, and hence the mechanical behavior, of the highly crosslinked UHMWPE. The crystallinity and radiation dose were key predictors of the uniaxial yielding, hardness, plastic flow, and failure properties of conventional and highly crosslinked UHMWPE. The correlation model from experiments would be the basic information to design the liner of artificial joint.

• The Korean Journal of Ceramics
• /
• 제3권3호
• /
• pp.213-217
• /
• 1997

In this paper, the imparct of X-ray and plasma process-induced-damages to La doped Lead Zirconate Titanate (PLZT, (Pb1-xLa)(Zr0.5Ti0.5)O3) capacitor characteristics have been investigated from the viewpoint of gigabit scale dynamic random access memory (DRAM) applications. Plamsa damage causes asymmetric degradation on hysteresis characteristics of PLZT films. On the other hand, X-ray damage results in a symmetrical reduction of charge storage densities (Qc's) for both polarities. As La concentration increases in the films, the radiation hardness of PLZT films on X-ray and plasma exposures is improved. It is observed that the damaged devices are fully recovered by thermal annealing under oxygen ambient.

• 한국버섯학회지
• /
• 제15권4호
• /
• pp.264-268
• /
• 2017

하이테크 산업은 이른바 스마트 농업의 융합에 장벽을 극복하기 위해 농업의 경관을 바꾸고있다. 정밀 농업의 핵심인 온도, 습도, 위치 정보 및 실시간 요약 정보 등의 중요한 ICT제어기술을 적용하여 버섯재배온도, 습도, 조명, 이산화탄소 등의 제어가 가능한 컨테이너형 버섯재배 시스템을 설계제작하였으며, 버섯 재배에 활용가능성을 표고버섯을 대상으로 시험을 수행하였다. 표고버섯의 초발이소요일수는 청색 LED광에서 5~6일, 적색 LED광, 청색-적색-흰색 혼합 LED광, 형광등에서 6~7일로 유사하였고 생체중은 청색 LED광에서 39.82 g으로 타처리구에 비해 우수하였다.

• 한국산학기술학회논문지
• /
• 제16권7호
• /
• pp.4388-4397
• /
• 2015

이 연구는 아크릴 수지의 유도광선변화에 따른 속성 변화를 연구하여 최적의 특성을 가진 아크릴 수지를 개발할 수 있도록 건열 및 마이크로파 경화 의치상 아크릴 수지의 향상된 물성에 대한 연구이다. 굽힘강도와 경도, 색차를 관찰한 결과 Vertex RS 및 Paladent 20는 건식 열 경화 시편 5, 15, 25 kGy의 조사에 이상적인 속성을 보였다. 마이크로 웨이브 경화에서는 5 kGy의 조사에서 이상적인 속성을 보였다. 상관관계 분석은 ARD와 굴곡 강도 (0 418), E 계수 (0.675), 및 바콜 경도 (0 588) 사이의 긍정적인 상관관계를 보여 주었다. 방사선 경화형 기술은 고분자 복합 재료의 제작으로 인한 오염 문제를 완화하는 데 도움이 될 수 있으며 고분자의 가공성에 영향을 주지 않고 자외선 경화 기술과 나노 기술 융합 및 기계적 특성의 향상에 크게 기여할 수 있다.