UV curing technology becomes important in various sectors of applications due to the high efficiency, environmental protection, and saving of energy. The effect of different proportion of vinylester (VE) and unsaturated polyester (UP) for VE/UP blend system was investigated in context of mechanical properties. The compositions of VE/UP blend were varied within 0:100, 20:80, 40:60, 60:40, 80:20, and 100:0 by weight percent. 1 wt% 1-hydroxy-cyclohexyl-phenyl-ketone was used as photoinitiator. The used intensity of UV light was in the range of $40~70 mW/\textrm{cm}^2$. The flexural strength of vinylester was not sensitive to the intensity of UV light. But the unsaturated polyester was very sensitive to the intensity of UV light. The flexural strength of vinylester was always superior to that of unsaturated polyester. The addition of the vinylester increased the flexural strength of blend system.
광경화(UV-curing)에 의한 PVC 바닥상재 코팅기술은 PVC 바닥상재 질의 개선을 위하여 사용되는 것이다. 본 연구에서 사용한 폴리우레탄 아크릴레이트 수지는 반응성 모노머, 광개시제, 그 외 첨가제를 배합하여 제조하였고, 올리고머는 상용화된 지방족 우레탄 아크릴레이트를 사용하였다. 제조한 코팅액을 바코팅(bar-coating) 방법으로 PVC 바닥상재에 코팅한 후 광경화법을 이용하여 상재표면에 코팅층을 형성하였다. 코팅에 사용된 코팅액은 FTIR로 측정하여 특성을 확인하였으며, PVC 상재 표면에 형성된 코팅층의 물성은 광택과 부착력으로 평가하였다. 코팅층의 물성은 코팅조성과 공정조건에 영향을 받았다.
The myeolchi-jeot samples were divided into different groups with or without the supplementation with biogenic amines. Subsequently, the samples were placed in an oven at $80^{\circ}C$ for 1 hr to allow the chemical reaction to proceed, and then were analyzed for N-nitrosamine contents using GC-TEA. N-nitrosamine was not detected in any of the myeolchi-jeot samples which had been treated with/without sodium nitrite. On the other hand, the yield of N-nitrosopyrrolidine from 1,000 mg/kg of putrescine and spermidine in the myeolchi-jeot samples (treated with 5 mg/kg of sodium nitrite) was 0.002 and 0.014%, respectively. N-nitrosamine was not produced from any other biogenic amines like, histamine, tyramine, cadaverine and spermine. In addition, curing and heating were the factors which influenced the formation of N-nitrosamine during the nitrosation of biogenic polyamines. For the formation of N-nitrosamine in the food systems, treatment with sodium nitrite and heating at appropriate temperature along with the satisfied supplementation of biogenic polyamines are required.
UV 경화에 사용되는 poly(ethylene glycol 400) dimethacrylate(PEGA400DMA)와 ethylene glycol dimethacrylate(EGDMA)를 사용하여 모노머(monomer)의 종류에 따른 경화거동과 광개시제의 양과 온도에 따른 경화 거동을 photo-DSC를 사용하여 살펴보았다. Ethylene glycol의 단위길이가 늘어날수록, 광개시제의 양이 증가할수록, 반응 온도가 높을수록 경화속도가 빠르게 일어났다. 또한 PEG400DMA의 반응속도가 EGDMA보다 느리게 나타났지만 전환률은 높게 나타남을 알 수 있었다.
Energy efficient and low pollution combustion systems the use gaseous fuels have been in great demand in recent year. Radiant burner in many different forms are emerging as very desirable combustion systems for same reason. Porous radiant burners are used in drying, preheating and curing, and in other type of materials processing and manufacturing processes. However, little knowledge is available about the operating characteristics and the structure of flames in porous ceramic fiber radiant burners. The objective of the present work is to investigate the global performance characteristics of the ceramic fiber burner. A detailed study which includes the spectral intensity, gas temperature, radiation efficiency and global pollutant emissions. Another objective is to study the flame structure of the ceramic fiber burner by measuring the local gas temperature. The results indicate that ceramic fiber burner do offer a 19-44% gain in radiant efficiency. The ceramic fiber burner exhibit significant spectral intensity peaks in the band at $2.0-2.5{\mu}m$. The local temperature distribution inside the mat and near the mat surface as a function of the equivalence ratio can be reasonably interpreted by the relation of the heat balance in the mat and movement of the reaction zone. Nox emission from ceramic fiber burner is less than 25ppm throughout the operating range.
A shield was made by mixing materials such as bismuth(Bi) and barium(Ba) with silicon to evaluate its shielding ability. Bismuth was made into a shield by mixing a bismuth oxide(Bi2O3) colloidal solution and a silicon base and applied to a fibrous fabric, and barium was made by mixing lead oxide(PbO) and barium sulfate(BaSO4) with a silicon curing agent and solidifying it to make a shield. The test was conducted according to the lead equivalent test method for X-ray protective products of the Korean Industrial Standard. The experiment was conducted by increasing the shielding body one by one from the test condition of 60 kVp, 200 mA, 0.1sec and 100 kVp, 200 mA, 0.1 sec. At 60 kVp, 2 lead oxide-barium sulfate shields, 2 bismuth oxide 1.5 mm shields, and 5 bismuth oxide 0.3 mm shields showed shielding ability equal to or higher than that of lead 0.5 mm. At 100 kVp, 2 lead oxide-barium sulfate shields and 2 bismuth oxide 1.5 mm shields showed shielding ability equal to or higher than that of lead 0.5 mm. It was confirmed that when using 2 pieces of lead oxide-barium sulfate and 1.5 mm of bismuth oxide, respectively, it has shielding ability equivalent to that of lead. Bismuth oxide and lead oxide-barium sulfate are lightweight and have excellent shielding ability, thus they have excellent properties to be used as an apron for radiation protection or other shielding materials.
Application of UV curing technique for poly vinyl chloride (PVC) floor tiles coating has improved the quality of PVC floor. Various formulations including acrylated oligomers based on a polyurethane were blended with reactive monomers, photoinitiators and other additives. The used oligomers are commercial aliphatic urethane acrylates. Thin films were prepared on PVC tiles by bar coating with different formulations using UV radiation. The coating resins were characterized by FTIR. The properties of UV-cured films such as gloss grade and adhesion were examined. The properties of UV-cured films dependent on the influence of composition and processing conditions was studied. The investigation was conducted to achieve an optimal domain of composition and desired coating effect.
기존 위성 전자장비 하우징에 널리 사용되는 알루미늄 합금 소재를 경량 복합재료로 대체함으로써 위성 경량화를 크게 개선하고자, 경량 복합재료로 구성된 전자장비 하우징을 제작하고 성능 검증에 대하여 다루었다. 이를 위해 복합재료의 낮은 가공성을 극복하기 위하여 후처리를 최소화할 수 있는 복합재료 하우징 제작공정을 설계하고, 격자 구조로 강화된 일체형 하우징 본체를 동시경화 방법에 의해 제작하였다. 또한 제작된 전자장비 하우징의 내구성, 강성, 열전도도, 전기전도도, EMI차폐 및 방사차폐에 대한 성능 평가 결과를 분석하였다. 아울러 본 연구에서 제작한 복합재료 하우징은, 동일한 형상의 알루미늄 하우징 대비 상당한 질량절감을 가능하게 함을 제시하였다.
UV경화형 2-ethylhexyl acrylate(2-EHA)/acrylic acid(AA) 점착제의 점착특성에 대한 경화제 함량의 영향에 대해 조사하였다. 0.01 wt%의 극소량의 MMT가 도입된 아크릴 단량체 혼합물에 각각 0, 0.05, 0.1, 0.3 wt%의 1,6-hexanediol diacrylate(HDDA)를 경화제로 첨가하고 UV조사를 실시하여 점착제를 제조하였다. MMT 도입이 공중합체의 경화 거동과 점착제의 표면 특성에 미치는 영향은 매우 낮았으나, 점착특성의 경우 MMT의 도입으로 분자 사슬의 유연성이 제한되면서 응집파괴(cohesive failure)가 억제되는 것을 확인하였다. 그러나 0.3 wt%의 경화제가 도입된 점착제는 사슬 경직성이 크게 증가하면서 MMT의 첨가가 오히려 점착특성을 저하시키는 것으로 추측되었다. 결과를 토대로 2-EHA/AA 점착제의 경우 0.05 wt%의 낮은 함량의 경화제와 극소량의 MMT의 도입이 박리 시 응집파괴 없이 균형적인 점착특성을 부여하는 것으로 판단된다.
목 적 : 3차원치료계획 (3D plan)과 대향2문조사(POP plan)의 선량 계획시 치료표적 (Planning Target Volume, PTV)와 정상조직(Organ at Risk, OAR)에 실제 흡수되는 선량을 반도체검출기를 이용하여 실시간선량측정(Real- time dosimetry)을 시행함으로써 치료계획의 타당성을 확인하고자 한다. 대상 및 방법 : 실제 치료할 환자의 구강안을 채워줄 Aquaplaste를 Simulation과정에서 제작하며 측정하고자 하는 부위에 Aquaplaste를 성형하여 반도체 검출기가 자리할 공간을 확보한다. 치료시 반도체검출기를 측정부위에 위치시키고 치료가 진행중 각 Port에 해당하는 Electrometer의 지시치를 얻는다. 얻은 지시치에 선량변환계수(Diode Calibration Factor, DCF)를 이용하여 실제 선량으로 환원하여 Exp. Dose와 실제 Dose를 비교하며 오차를 구한다. 실험의 수를 증가시켜 보다 정확한 결과를 얻기 위하여 Alderson Rando phantom(Huestis, USA)을 이용하여 같은 실험을 반복한다. 결 과 : 대향2문조사를 한 A환자의 경우 Exp. value와 측정선량의 비(exp.D/eff.D)가 197.5/199로 -1.2%, 3차원치료계획을 한 B환자는 exp.D/eff.D가 199.9/198.7로 +0.6%, C환자의 경우 exp.D/eff.D가 196/200으로 -1.5%가 차이 남을 알 수 있었다. 또 Target dose 외에 방어하고자 하는 부위의 측정도 병행한 C환자의 결과치는 96/200으로 47%의 선량이 측정되어 방어의 목적을 달성했음을 알 수 있었다. Phantom을 이용한 측정에서는 A환자와 같이 (a) point(target), (b) point(protect)로 나뉘어 측정하여 다음의 결과치를 얻었다. Phantom 1 (a): 190.6/198.4=-3.9%, (b): 119.6/124.2=-3.7%, Phantom 2 (a): 185.4/191.3=-3%, (b): 109.6/113.8=-3.7%의 결과치를 얻어 목적한 선량에 ${\pm}5%$이내로 만족함을 알 수 있었다. 결 론 : 반도체검출기를 이용한 치료전 선량 측정의 유용성을 알아본 이번 실험은 Target dose 뿐만 아니라 방어하고자 하는 영역 또한 알아봄으로써 치료의 타당성을 확인하는데 매우 유용했고 단순선량계산에 의한 확인되지 않는 Target dose를 확인하는 데에도 큰 이점이 있다고 생각된다. 치료 전 L-gram과 같이 이런 측정은 매우 효과적으로 치료방법의 타당성과 이후의 치료계획에도 많은 이득을 가져다 줄 것이라고 생각된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.