• 공업화학
• /
• 제8권3호
• /
• pp.524-532
• /
• 1997

방사성물질의 수송 및 저장용기 등에 사용하기 위하여 개발한 개질 에폭시수지 및 수소 첨가된 비스페놀-A형 에폭시수지계 중성자 차폐재들의 열분해온도, 열전도도, 열팽창 등의 열적 성질 및 인장강도, 압축강도, 굴곡강도, 비중, 무게변화, 수소 함량변화 등의 역학적 성질에 방사선이 미치는 영향을 검토하였다. 방사선 조사선량의 증가에 따라 KNS(Kaeri Neutron Shield)-201과 KNS-302 차폐재들의 열분해온도는 증가하는 경향을 나타내었으나, KNS-202와 KNS-301은 0.5 MGy 이상에서는 감소하는 경향을 나타내었다. 또한 방사선 조사선량이 온도에 따른 차폐재들의 무게변화에는 거의 영향을 미치지 않는 것으로 나타났다. 0.1 MGy까지 열전도도는 방사선 조사선량의 영향을 거의 받지 않는 것으로 나타났다. 또한 KNS-301과 302 차폐재들의 열팽창은 KNS-201과 202보다 방사선 영향을 적게 받는 것으로 나타났다. 0.1 MGy까지는 방사선 조사선량의 증가에 따라 KNS-202 및 KNS-301과 302차폐재들의 인장, 압축 및 굴곡강도는 증가하는 경향을 나타내었다. 반면에 KNS-201은 방사선 조사선량의 증가에 따라 감소하는 경향을 나타내었다. 또한 조사선량의 증가에 따른 차폐재들의 비중, 무게 및 수소함량은 크게 변하지 않는 것으로 나타났다.

• BMB Reports
• /
• 제33권2호
• /
• pp.133-137
• /
• 2000

To elucidate the effect of oxygen radicals on the molecular properties of proteins, the secondary and tertiary structure and molecular weight size of BSA and ${\beta}$-lactoglobulin were examined after irradiation of proteins at various doses. Gamma-irradiation of protein solutions caused the disruption of the ordered structure of protein molecules as well as degradation, cross-linking, and aggregation of the polypeptide chains. As a model system, BSA and ${\beta}$-lactoglobulin were used as a typical ${\alpha}$-helical and a ${\beta}$-sheet structure protein, respectively. A circular dichroism study showed that the increase of radiation decreased the ordered structure of proteins with a concurrent increase of aperiodic structure content. Fluorescence spectroscopy indicated that irradiation quenched the emission intensity excited at 280 nm. SDS-PAGE and a gel permeation chromatography study indicated that radiation caused initial fragmentation of proteins resulting in a subsequent aggregation due to cross-linking of protein molecules.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.518-521
• /
• 1999

This paper describes the properties of discharge current and the residual voltage for $^{60}$ C$_{0}$ -${\gamma}$ irradiated cables using in nuclear power generating station. As these properties related with $^{60}$ C$_{0}$ -${\gamma}$ -irradiatiation dose, it is suggested that these properties can be utilized as a index of irradiation degradation. As the ratio of degradation increases, the residual voltage in the initial time range increases and the peak moves to the shorter time. Therefore, I know the degree of radiation degradation from the position of the peak.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.169-172
• /
• 2000

In this paper, we evaluated the mechanical and dielectric properties of LDPE depend on $Co_{60}$${\gamma}$-irradiation doses. The chemical analyses for FT-IR, gel content, the mechanical properties for elongation at break and the dielectric parameters for permittivity, tan$\delta$ were discussed as a function of irradiation doses. Test result presented that elongation at break of irradiated LDPE was inversely proportional to gel content. For dielectric analyses, permittivity showed a salient characteristic for various irradiation doses, it was related to polar groups caused radiation degradation and tan$\delta$ of irradiated LDPE increased with irradiation doses.

• 방사선산업학회지
• /
• 제6권4호
• /
• pp.311-316
• /
• 2012

The purpose of this study was to compare the sensory effects of different culinary methods such as electric pan cooking and charcoal roasting on gamma irradiated ready-to-eat chicken at 10 kGy. Evlauation of sensory properties were measured by estimating the organoleptic characteristics and physicochemical properties (TBARS, hardness and color different matters). The results showed that gamma irradiation after charcoal-roasting could more effectively moderate the decrease of sensory qualities and reduce off-flavor of ready-to-eat chicken than gamma irradiation after following electric pan cooking. These results suggest that gamma irradiation after charcoal broiling can be an effective culinary method for the preparation of ready-to-eat chicken.

• 폴리머
• /
• 제32권6호
• /
• pp.598-602
• /
• 2008

본 연구에서는 리튬이차전지용 상용 분리막에 전자선을 조사하여 가교구조를 지닌 내열성이 향상된 분리막을 제조하였고 조사선량에 의한 열적, 기계적 특성들을 평가하였다. 전자선 조사된 분리막의 열수축률은 조사선량이 증가할수록 감소하였고 AC impedance를 이용한 shutdown거동 연구 결과 전자선 조사를 하지 않은 분리막보다 우수한 shutdown 특성을 갖는 것으로 확인하였다. 또한, 전자선 조사선량이 증가할수록 분리막의 모듈러스는 향상되는 반면 인장강도와 파단 연신율은 감소됨이 관찰되었다.

• 방사선산업학회지
• /
• 제8권1호
• /
• pp.53-57
• /
• 2014

The kenaf is quickly developing as a renewable resource. Kenaf can be grown under a wide range of weather conditions. Modification of kenaf fiber by graft polymerization provides a significant route to alter the chemical properties, including surface hydrophilicity or hydrophobicity. In this study, kenaf fiber surfaces were grafted with acrylic acid as a hydrophilic group using electron beam irradiation. The grafting rate increased with an increase in grafting time. The FT-IR results confirmed that acrylic acid was successfully grafted onto the kenaf fibers. The wettability of the kenaf fiber was increased, accompanied by acylic acid grafting on the fiber surface. According to the permeability test result, it was found that acrylic acid grafted kenaf fiber reinforced cement composite was more reduced than non-grafted kenaf fiber reinforced cement composite.

• 방사선산업학회지
• /
• 제4권4호
• /
• pp.335-339
• /
• 2010

In this study, the surface of polyimide (PI) films was modified using ion implantation to enhance its adhesion to a deposited copper (Cu) layer. The surfaces of the PI films were implanted with 150 keV $Xe^+$ ions at fluences varying from $1{\times}10^{14}$ to $1{\time}10^{16}ions\;cm^{-2}$. The Cu layers were then deposited on the implanted PI. The surface properties of the implanted PI film were investigated based on the contact angle measurements, Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). Furthermore, the adhesive strength between the deposited Cu layer and PI film was estimated through a scratch test using a nanoindenter. As a result, the surface environment of the PI film was changed by the ion implantation, which could have a significant effect on the adhesion between the deposited Cu layer and the PI.

• Journal of Radiation Protection and Research
• /
• 제43권4호
• /
• pp.131-136
• /
• 2018

Background: We investigated the current characteristics of a thin-film Ag electrode on a chemical vapor deposition (CVD) diamond. The CVD diamond is widely recognized as a radiation detection material because of its high tolerance against high radiation, stable response to various dose rates, and good sensitivity. Additionally, thin-film Ag has been widely used as an electrode with high electrical conductivity. Materials and Methods: Considering these properties, the thin-film Ag electrode was deposited onto CVD diamonds with varied deposition thicknesses (${\fallingdotseq}50/98/152/257nm$); subsequently, the surface thickness, surface roughness, leakage current, and photo-current were characterized. Results and Discussion: The leakage current was found to be very low, and the photo-current output signal was observed as stable for a deposited film thickness of 98 nm; at this thickness, a uniform and constant surface roughness of the deposited thin-film Ag electrode were obtained. Conclusion: We found that a CVD diamond radiation detector with a thin-film Ag electrode deposition thickness close to 100 nm exhibited minimal leakage current and yielded a highly stable output signal.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.860-866
• /
• 2019

The lead element or its salts are good radiation shielding materials. However, their toxic effects are high. Due to less toxicity of bismuth salts, the radiation shielding properties of the bismuth salts have been investigated and compared to that of lead salts to establish them as a better alternative to radiation shielding material to the lead element or its salts. The transmission geometry was utilized to measure the mass attenuation coefficient (${\mu}/{\rho}$) of different salts containing lead and bismuth using a high-resolution HPGe detector and different energies (between 81 and 1333 keV) emitted from point sources of $^{133}Ba$, $^{57}Co$, $^{22}Na$, $^{54}Mn$, $^{137}Cs$, and $^{60}Co$. The experimental ${\mu}/{\rho}$ results are compared with the theoretical values obtained through WinXCOM program. The theoretical calculations are in good agreement with their experimental ones. The radiation protection efficiencies, mean free paths, effective atomic numbers and electron densities for the present compounds were determined. The bismuth fluoride ($BiF_3$) is found to have maximum radiation protection efficiency among the selected salts. The results showed that present salts are more effective for reducing the intensity of gamma photons at low energy region.