• Korean Journal of Remote Sensing
• /
• v.16 no.4
• /
• pp.305-313
• /
• 2000

A vicarious calibration method was developed for the OSMI sensor calibration. Employing measured aerosol optical thickness by a sunphotometer and a sky radiometer and water leaving radiance by ship measurements as inputs, TOA (top of the atmosphere) radiance at each OSMI band was simulated in conjunction with a radiative transfer model (Rstar5b) by Nakajima and Tanaka (1988). As a case of examining the accuracy of this method, we simulated TOA radiance based on water leaving radiance measured at NASA/MOBY site and aerosol optical thickness estimated nearby at Lanai, and compared simulated results with SeaWiFS-estimated TOA radiances. The difference falls within about $\pm$5%, suggesting that OMSI sensor can be calibrated with the suggested accuracy. In order to apply this method for the OSMI sensor calibration, ground-based sun photometry and ship measurements were carried out off the east coast of Korean peninsula on May 31, 2000. Simulations of TOA radiance by using these measured data as input to the radiative transfer model show that there are substantial differences between simulated and OSMI-estimated radiances. Such a discrepancy appears to be mainly due to the cloud contamination because satellite image indicates optically thin clouds over the experimental area. Nevertheless results suggest that sensor calibration can be achieved within 5% uncertainty range if there are ground-based measurements of aerosol optical thickness, and water leaving radiances under clear-sky and optically thin atmospheric conditions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.7-15
• /
• 2003

The purpose of this simulation study is to determine the window transmittance by RADIANCE lighting simulation tool where the horizontal blind is installed. Parameters such as sky types, seasonal changes, altitude, azimuth, and horizontal blind angle at a 0$^{\circ}$, 45$^{\circ}$, 90$^{\circ}$ were considered. The simulation results present that measured directional transmittances have different values according to each directional property of the horizontal blind. In addition, methodology was described to apply window transmittance data to DayDim program which is a lighting calculation and analysis tool especially for the performance of daylight responsive dimming systems.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.1-8
• /
• 2004

In the present, most lighting simulation programs are based on luminaires data produced at overseas. Currently, it is difficult to use proper domestic luminaire database in most lighting simulation programs, because there are only oversea luminaire database available. Therefore, in this study, domestic luminaire database were developed and categorized, and applied to Internet Web-based RADIANCE rendering system. Luminaire database are constructed with 3D modeling, materials, and IES candlepower distribution data of each luminaire.

• Aerospace Engineering and Technology
• /
• v.2 no.1
• /
• pp.190-196
• /
• 2003

The top-of-atmosphere(TOA) radiance and its seasonal variation for various surface types have been analyzed using the MODIS direct broadcasting data acquired from the KARI ground station for the period between July 2002 and November 2003. The selected study areas considering the MODIS spatial resolution and the characteristics of the Korean peninsular are as follows: agricultural land, forest land, inland water, sea water, urban land, wetland, and atmosphere(cloud). The results showed that TOA radiances depend on the surface characteristics for the selected sample areas. Furthermore, the MODIS observations appear to well depict the general features of earth radiation properties. The authors hope that this study may provide the basic information on the analysis of hyperspectral data.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2005

Building can get absolutely different images by different building materials. In architectural design process, there are various kinds of simulation programs to prove visualized images. But since most of simulation programs are consist of data for building material informations produced at overseas, it is difficult to utilize them in domestic environment. In this paper, we collected data from domestic building materials and measured optical features which they have, and then suggested methods to arrange the database and made database from some of domestic building materials to develope Internet Web-based RADIANCE redering system.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.156-158
• /
• 2007

The radiance observed from the ocean depends on the illumination and viewing geometry along with the water properties, and this variation is called the bidirectional effect which is important to be considered in ocean color remote sensing. In the present study, as a preliminary step, the spectral-angular radiances in coastal water were investigated with experiments for a range of viewing geometric conditions $(0-70^{\circ})$. Over a phytoplankton-dominated water surface the upward radiance for visible and near-infrared wavelengths (example, SeaWiFS and GOCI) increased at nadir and decreased toward the near-horizon, becoming dependent of viewing angles (with higher radiance at nadir view angle and lower radiance at near-horizon viewing angle). This variations were better expressed by the Q-factor, which relates upwelling radiance to the upwelling irradiance (i.e., $Q=E_u/L_u$, also dependent on Sun's position). The Q-factor for this case was more non-uniform with the considered wavelengths and was dependent on viewing geometric conditions. These experimental results confirm the previous similar findings in other coastal waters.

• KIEAE Journal
• /
• v.5 no.3
• /
• pp.3-9
• /
• 2005

Venetian blinds are used with windows to improve the uniformity ratio of illuminance and interior daylighting distribution under direct sunlit conditions. The main objective of Venetian blinds shading system is to obstruct direct sunlight and at the same time allow daylight to penetrate into the room. Venetian blinds would have greater effect on the interior daylighting condition under clear sky which has both skylight and sunlight than overcast sky which has only skylight. However, due to the lack of data, design and evaluation tools, it is difficult for architects to choose or install venetian blinds during the building design stages. The purpose of this study was to develop an analysis method for shading and daylighting effects of Venetian blinds using the RADIANCE program. The major variables related to the venetian blinds included blinds's slat angle and the ratio of slat width to window height, the radius slat of curvature and the building azimuth. In this study, a series of parametric physical mock-up model measurements and genblinds command in the RADIANCE simulations. The results of this study will provide building designers with the design data at early design stages.

• Korean Journal of Optics and Photonics
• /
• v.17 no.5
• /
• pp.391-395
• /
• 2006

In this paper, radiometric calibration of a FTIR spectrometer for passive remote sensing application was introduced and verified. Radiometric calibration is a significant signal processing procedure to retrieve the object radiance from the measured spectrum. The object radiance is measured and registered distorted by the detector's responsivity dependent on wavelength and instrument self-emission. Radiance of two temperature points, hot temperature and cold temperature, from a well-controlled blackbody was measured and used to obtain the scale factor and offset factor which are required for radiometric calibration. For gas phase C2H5OH. radiometric calibration was done and verified through comparison of its emission line width and intensity with the standard spectrum.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.91-95
• /
• 2002

This study is using the RADIANCE lighting simulation tool to determine the transmittance where the horizontal blind is installed. The transmittance is applied to DayDim program which is a lighting calculation and analysis tool. Parameters such as clear sky type, seasonal changes(the summer solstice), altitude, azimuth and horizontal blind angle at a 0$^{\circ}$, 45$^{\circ}$, 90$^{\circ}$ were considered. The simulation results present that measured directional transmittances have different values according to each directional property of the horizontal blind.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.203-207
• /
• 2003

In the present, most lighting simulation programs are based on luminaires data produced at overseas. Currently, it is difficult to use proper domestic luminaire database in most lighting simulation programs, because there are only oversea luminaire database available. Therefore, in this study, domestic luminaire database were developed and categorized and applied to Internet Web-based RADIANCE rendering system. Luminaire database are constructed with 3D modelings, materials and IES data of each luminaire.