• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.15-16
• /
• 2006

In-process surface roughness prediction is studied in this research. To implement in-process prediction, spindle displacement is introduced. Machined surface's roughness is assumed to be expressed in terms of spindle displacement. In-process measurement of spindle displacement is conducted using CCDS (cylindrical capacitive displacement sensor). Two prediction models are developed. One is simple linear model between measured surface roughness and values by spindle displacement. The other is multiple regression model including machining parameters like spindle speed, fee rate and radial depth of cut. Relation between machined surface roughness and roughness by spindle displacement are verified.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권4호
• /
• pp.13-18
• /
• 2003

This paper presents the in-process compensation to control cutter ronout and to improve the machined surface quality. Cutter ronout compensation system consists of the micro-positioning servo system with piezoelectric actuator which is embeded in the sliding table to manipulate radial depth of cut in real-time. Cutting force feedback control was proposed in the angle domain based upon repetitive learning control strategy to eliminate chip load variation in end milling process. Micro-positioning control due to adaptive actuation force response improves the machined surface quality by cutter ronout compensation.

• 대한기계학회논문집A
• /
• 제37권10호
• /
• pp.1269-1278
• /
• 2013

엔드밀링 공정은 형상창성기구의 특성 상, 절삭면적의 주기적인 변화를 피할 수 없다. 그러므로, 본 연구에서는, 가공 중 절삭날과 공작물 사이의 간섭영역에 해당하는 절삭면적의 모델을 확립하여, 가공면 형상 특성과 절삭면적의 관계를 규명하고자 한다. 대상 가공면은 측벽을 선정하였으며, 형상 특성은 축 방향 진직도를 선택하였다. 절삭면적 및 축방향 진직도에 영향을 미치는 특이점 추정 모델의 타당성은 반경 방향 및 축 방향 절삭깊이를 변화시키며 엔드밀링 가공을 수행하여 검증하였다. 연구 결과, 배분력이 음의 값을 갖지 않는 안정적인 엔드밀링 가공의 경우, 상향절삭은 절삭면적이 증가했다. 일정해지는 영역에서, 하향절삭은 절삭면적이 일정했다 감소하는 영역에서 가공면을 창성하며, 영역이 변화될 때 가공면에 특이점이 발생하는 것이 확인되었다.

• 터널과지하공간
• /
• 제32권4호
• /
• pp.243-253
• /
• 2022

본 연구에서는 회전식 절삭시험기를 활용하여 TBE (Tunnel Boring Extender)의 굴착효율을 평가하였다. 회전식절삭시험에서 TBE에 의한 굴착과정을 모사하기 위하여 중앙부가 선행 굴착되어 있는 중공형의 암석모사시험체를 모르타르를 이용하여 제작하였다. 회전식 절삭시험기에 설치된 언더커팅 디스크(undercutting disc cutter, UDC)를 이용하여 나선궤적을 따라 암석을 절삭함으로써 TBE에 의한 굴착과정을 모사하였으며, 언더커팅 디스크의 절삭조건을 변화시켜가며 절삭조건들이 커터작용력 및 비에너지에 미치는 영향을 살펴보았다. 시험결과로부터 UDC의 커터작용력은 반경압입깊이와 수직압입깊이가 증가함에 따라 선형적으로 증가하는 경향을 확인할 수 있었으며, 세 방향의 작용력 중 수직력의 비중이 매우 크게 나타났다. 반면 비에너지는 반경방향과 수직방향 압입깊이에 따라 지속적으로 감소하는 경향을 나타내었고, 특히 두 압입깊이의 비에 따라 비에너지가 최소화되는 지점이 나타날 것으로 판단되었다.

• 대한기계학회논문집
• /
• 제16권9호
• /
• pp.1669-1680
• /
• 1992

본 연구에서는 볼 엔드밀 가공에서 공구계의 처짐을 고려한 절삭력과 처짐을 예측하고, 처짐의 예측으로 가공 정밀도를 향상시키는 이송 속도와 헬릭스 각의 선정 에 대해서 고찰한다.

• Design & Manufacturing
• /
• 제16권4호
• /
• pp.17-23
• /
• 2022

Recently, several studies are being conducted to achieve a curvature of 180° or more for the edge of the display glass. The thermocompression molding process is applied to the manufacture of curved glass, and high hardness G5 graphite is used as the mold material to withstand the impact applied to the mold. G5 graphite has high hardness and strong brittleness, which makes tool wear and surface damage easy during machining. Therefore, the demand for diamond-coated tools with good mechanical properties is increasing in the G5 machining field. In this study, the optimal cutting conditions and machinability of a nanodiamond (NCD) coated ball end mill being developed by a tool manufacturer were analyzed and evaluated. For this purpose, the same test was performed on the microdiamond (MCD) coated ball end mill and compared together. In summary, the machinability of MCD and NCD coated tools showed better cutting performance at a cutting speed of 282 m/min, a feed rate of 1,400 mm/min, and a radial depth of cut of 0.08 to 0.1 mm.

• 한국기계가공학회지
• /
• 제1권1호
• /
• pp.38-47
• /
• 2002

Machining quality has been improved with the development of cutting tools. However, it is difficult to obtain a high degree of quality in machining a deep pocket with a long end mill, since machining accuracy is mainly dependent on the stiffness of the cutting tool and tool holder. To improve machining quality in machining a deep pocket using an end mill, the performance by cutting condition compare with others. Owing to this problem, it is necessary to select suitable tool and holder in the deep pocket machining. In this study, the hydraulic holder for the high speed machining is introduced and the performance of that is compared with others according to cutting conditions. The cutting parameters involved were; slenderness ratio in the range of 3 to 6 (L/D), radial depth of cut from 0.01 to 0.05 mm. Cutting force and surface roughness, precision of form were observed during the experiment to investigate cutting state.

• Structural Engineering and Mechanics
• /
• 제73권5호
• /
• pp.501-513
• /
• 2020

In the present work, the optimization of machining parameters to achieve the desired technological parameters such as surface roughness, tool radial vibration and material removal rate have been carried out using response surface methodology (RSM). The hard turning of EN19 alloy steel with coated carbide (GC3015) cutting tools was studied. The main problem faced in manufacturer of hard and high precision components is the selection of optimum combination of cutting parameters for achieving required quality of surface finish with maximum production rate. This problem can be solved by development of mathematical model and execution of experiments by RSM. A face centred central composite design (FCCD), which comes under the RSM approach, with cutting parameters (cutting speed, feed rate and depth of cut) was used for statistical analysis. A second-order regression model were developed to correlate the cutting parameters with surface roughness, tool vibration and material removal rate. Consequently, numerical and graphical optimization were performed to obtain the most appropriate cutting parameters to produce the lowest surface roughness with minimal tool vibration and maximum material removal rate using desirability function approach. Finally, confirmation experiments were performed to verify the pertinence of the developed mathematical models.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제3회 금형가공 심포지엄
• /
• pp.255-259
• /
• 2004

3-D micro structures and micro tools are fabricated using MEDM (Micro Electric Discharge Machining). To make micro structures, micro electro discharge milling process is applied. During micro electro discharge milling, electrode (tool) wears both axial and radial direction. To compensate tool wear which influences significantly machining accuracy, overlap machining path is proposed. Machining characteristics of micro electro discharge milling is investigated in considering of depth of cut and capacitance of discharge circuit. Micro complex shaped tools are fabricated using REDM (reverse electro discharge machining). Sacrificial electrode is machined through electro discharge milling process and is used as electrode to make micro tools. Using this process several micro tools shape of 'ㄷ', 'ㅁ' and 'o' are fabricated. With these complex shaped tools, micro machining is successfully applied repeatedly.

• 소성∙가공
• /
• 제14권3호
• /
• pp.251-256
• /
• 2005

3-D micro structures and micro tools were fabricated using Micro Electrical Discharge Machining (MEDM). To make micro structures, micro electrical discharge milling process was applied. During micro electrical discharge milling, electrode (tool) worn in the both axial and radial direction. To compensate tool wear which has significant influence on machining accuracy, machining path overlapping was proposed. Machining characteristics of micro electrical discharge milling was investigated in considering of depth of cut and capacitance of discharge circuit. Micro complex shaped tools were also fabricated using REDM (reverse electrical discharge machining). Sacrificial electrodes were machined through electrical discharge milling process and were used as electrode to make micro tools. Using this process several micro tools shape of 'ㄷ', 'ㅁ' and 'o' were fabricated. With these complex shaped tools, micro machining was successfully applied repeatedly.