• 대한본초학회지
• /
• 제24권2호
• /
• pp.77-85
• /
• 2009

Objectives : To determine the discriminative criteria for Atractylodes rhizomes, the experiment of externalinternal characteristics and physicochemical pattern analysis were performed. Methods : External characteristics was observed using stereoscope. The sectioned materials which were covered with parffin were stained by Ju's method. Physicochemical patterns were analyzed using HPLC/DAD. Results : 1. External shape of original plant : Atractylodes maaocephala and A. japonica had relatively long petioles and 3-5 parted leaves. A. macrocephala had big purple flowers whereas A. japonica had relatively small white flowers and pinnate bracts. A. lancea had sessile leaves and white flowers, and the end parts of degenerated stamens were bent. 2. External shape of herbal medicine: A. macrocephala which was fist-shaped rhizome had pa-pillate processes and the cross section was light gray and sulcate. A. japonica and A. lancea were connected-beady or tubercular rhizomes, and the cross sections were both yellow-colored white. However, the cross section of A. japonica was fibrous, the width of cortex was narro-wer than that of stele, and radial shape in cortex was rare, whereas the width of cortex in A. lancea was similar to that of stele in size, and radial shape in cortex was obvious. 3. Internal shape of herbal medicine: A. macrocephala and A. lancea did not have lignified fascicles in cortex. However, the vascular bundles and vessels of A. macrocephala were wedge shaped and radial arrangement, and vascular bundles were densely populated in stele whereas those of A. lancea were repeatedly arranged and thinly extended to cortex. A. japonica had lignified fascicles in cortex and the width of vascular bundles was conspicuously thick with narrow intervals. 4. Physicochemical pattern analysis : A. macrocephala and A. lancea contained atractylenolide I and atractylenolide Ill whereas A. japonica contained atractylenolide I, atractylenolide Ill. diacetyl-atractylodiol, compound-4, compound-5. The three species of Atractylodes rhizomes showed different chromatogram patterns. Conclusions : The results could be used as discriminative criteria for Atractylodes rhizomes and as fundamental materials to researches of further pattern analysis and biological reaction.

• Journal of the Korean Wood Science and Technology
• /
• 제9권1호
• /
• pp.1-12
• /
• 1981

The structure of spiral thickenings, particulary the appearance, arrangement and orientation of thickenings in compression wood of Torreya nucifera, were studied in detail by light and polarizing microscope, scanning and transmission electron microscope. The results obtained are as follows: (1) Using the inclined sections at an angle of 45 degrees to the fiber axis, it seems that we can not only observe the more accurate transverse view of the thickenings but also investigate the formation of their thickenings. (2) Generally 2-4 pieces of thickenings are projected to the cell lumen as nipple-like appearance in transverse section and are as frequent, well developed, forming pair and have the rope-like appearance in radial surface. (3) The secondary wall of early wood is composed of 3 layers (S1, S2, S3) and orientation of thickening appears S helix but that of late wood is of 2 layers (S1, S2) and that orientation shows Z helix. Above two regions are demaracted at several tracheid cells from the growth ring boundary. (4) Orientation of thickening seems to be a element showing the characteristics of compression wood in Torreya nucifera. (5) It believes that the thickenings of compression wood are integral part of the S3 in early wood tracheids and of the S2 in late wood and have the same orientations as the inner-most microfibrils in these layers. (6) Thickening and cavities seem to be not formed together in a secondary cell wall of same tracheids.

• 한국정밀공학회지
• /
• 제30권1호
• /
• pp.18-23
• /
• 2013

Omni-directional robot is a typical holonomic constraint robot that has three degrees of freedom movement in 2D plane. In this study, a new omni-directional robot whose wheels are arranged in radial directions was proposed to improve driving performance of the robot. Unlike a general omni-directional robot whose wheels were arranged in a circumferential direction, moments do not arises in the proposed robot when the robot travels in a straight line. To analyze driving performance, dynamic modeling of the omni-directional robot, which considers friction and slip, was carried out. By friction measurement experiments, the relationship between dynamic friction coefficient and relative velocity was derived. Dynamic friction coefficient according to the angle difference between robot travel direction and wheel rotation direction was also obtained. By applying these results to the dynamic model, driving performance of the robot was calculated. As a result, the proposed robot was 1.5 times faster than the general robot.

• 생약학회지
• /
• 제6권1호
• /
• pp.43-47
• /
• 1975

Attempts were made to determine the characteristics of the morphology of Codonopsis lanceolata $T_{RAUT's}$ root. Its saponin and crude powder were examined by foaming and hemolytic tests and by observing transverse sections: 1) The cork-layer was consisted of multiple cells, and some of the cork cells contained monoclinic prism crystals of calcium oxalates. 2) The vascular bundle was formed of radial arrangement by the preminentic bursting pith and the irregular cambium ring with the abnormal growth. 3) The latex vessel and latex of the cortex were brown-gray or yellowish-brown. The latex vessel and sieve tube were consisted of the independent aggregates which had a number of layers. It had much more independent aggregates than Platycodi Radix. 4) The xylem was less than the phloem portion. The thick-walled vessels which had one to five lines ware more distributed than in Platycodi Radix. 5) The inulin distribution on a piece of section which is dipped in alcohol was observed through out the tissues, but starch grain was not found in it. 6) The duration time of foaming reaction of the crude powder in test tubes was shorter than that of Platycodi Radix. Foaming index of the foaming test of five percent decoctions was 3.33, 7) In the hemolytic test which used 10 percent decoction and one percent saponin solution, hemolytic action was very weak.

• 한국기계가공학회지
• /
• 제20권12호
• /
• pp.71-77
• /
• 2021

An impeller identification technique that is essential for adding viscosity measurement functions to overhead stirrers is presented in this study. Previous studies have revealed that using magnets facing the same poles arranged in a row can aid in distinguishing the types of impellers by detecting the number of magnets in a non-contact manner. However, as these previous studies measured the magnetic fields using analog Hall sensors, a converting circuit for the digital signals is required that can interface with the MCU. In this study, it was demonstrated that the number of magnets can be distinguished without using a separate conversion circuit by using a Hall sensor with a digital output. Owing to the unique hysteresis characteristics of digital Hall sensors, it was confirmed through experiments that the complex and diverse outputs appear depending on the direction of the magnetic field, the arrangement of magnetic poles, and the moving direction of the magnet. The measurement of the magnetic field showed that an edge signal equal to the number of magnets inserted into the impeller was detected when the radial direction was used, and the south pole was first approached.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.369-376
• /
• 2019

A complete solution for a soluble-boron-free (SBF) small modular reactor (SMR) is pursued with a new burnable absorber concept, namely centrally-shielded burnable absorber (CSBA). Neutronic flexibility of the CSBA design has been discussed with fuel assembly (FA) analyses. Major design parameters and goals of the SBF SMR are discussed in view of the reactor core design and three CSBA designs are introduced to achieve both a very low burnup reactivity swing (BRS) and minimal residual reactivity of the CSBA. It is demonstrated that the core achieves a long cycle length (~37 months) and high burnup (~30 GWd/tU), while the BRS is only about 1100 pcm and the radial power distribution is rather flat. This research also introduces a supplementary reactivity control mechanism using stainless steel as mechanical shim (MS) rod to obtain the criticality during normal operation. A further analysis is performed to investigate the local power peaking of the CSBA-loaded FA at MS-rodded condition. Moreover, a simple $B_4C$-based control rod arrangement is proposed to assure a sufficient shutdown margin even at the cold-zero-power condition. All calculations in this neutronic-thermal hydraulic coupled investigation of the 3D SBF SMR core are completed by a two-step Monte Carlo-diffusion hybrid methodology.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.480-480
• /
• 2008

Vacuum circuit breaker(VCB) is now emerging as an alternative of gas circuit breaker(GCB) which uses SF6 gas as insulating material whose dielectric strength is outstanding. But we have to reduce SF6 gas because SF6 gas is one of greenhouse gas and efforts to reduce greenhouse gas are now trend of the world. Therefore, we can say VCB is the optimal alternative of GCB because vacuum is environmentally friendly. The vacuum interrupter is the core part of VCB to interrupt arcing current. There are mainly two methods to extinguish arc. One is radial magnetic field (RMF) method and the other is axial magnetic field (AMF) method. We deals with RMF method in this paper. Compared with AMP, RMF arc quenching method has different principle to extinguish arc. In case of RMF method, pinch effect is much larger than AMF method. Because of pinch effect RMF type contact electrodes have the single large spot which is severly damaged and melted while AMF type contact electrodes have small and multiple spots which are slightly damaged and melted. To prevent contact electrode being damaged and melted from high temperature-arc, RMF method uses Lorentz force to move arc. In this paper we calculated and compared the arc driving force of two cases and we analyzed the force acting on each part of arc by means of commercial finite element method software Maxwell 3D. They have 3petals and we considered two cases. One is the case when fixed(upper) and movable(lower) contacts are in mirror arrangement (Case 1). The other is the case when one of two contacts (movable contact) is revolved at maximum angle as possible as it can be (Case 2). And at each case above, we analyzed arc driving force at two positions, position 1 is the closest to the center of contact and position 2 is near the edge of petal on fixed contact. As a result we could find that Case 2 generated stronger arc driving force than Case 1 at position 1. But at position 2 Case 1 generated stronger arc driving force than Case 2. This simulation method can contribute to optimizing spiral-type electrode designs in a view of arc driving force.

• 한국항행학회논문지
• /
• 제26권6호
• /
• pp.404-411
• /
• 2022

위성항법시스템 운용 시 주요 기능은 항법위성의 궤도를 정확히 결정하여 항법메시지로 전송하는 것이다. 본 연구에서는 확장 칼만필터와 정밀동역학모델을 결합하여 항법위성의 궤도결정을 수행하는 소프트웨어를 개발하였다. IGS (international gnss service) 지상국의 실제 관측값을 사용하여 GPS (global positioning system)와 QZSS (quasi-zenith satellite system)의 궤도결정을 수행하고, IGS 정밀궤도력과 비교하여 항법시스템의 주요 성능지표인 URE (user range error)를 계산하였다. 항법위성에 탑재된 시계오차를 추정할 경우 radial 방향 궤도오차와 시계오차가 높은 역상관 관계를 가지는데 서로 상쇄되어 GPS와 QZSS의 궤도결정 URE 표준편차는 1.99 m, 3.47 m로 낮은 수준을 유지하였다. 항법위성 시계오차를 추정하는 대신 항법메시지의 시계오차를 모델링한 값으로 대체하여 궤도결정을 수행하였으며, URE와 지역적 상관관계 및 지상국 배치에 의한 영향을 분석하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제46권2호
• /
• pp.125-131
• /
• 2018

This study was conducted to understand and to compare the qualitative aspects of anatomical characteristics in compression wood (CW), lateral wood (LW), and opposite wood (OW) in a stem of Ginkgo biloba. The qualitative analysis was examined by optical microscopy and scanning electron microscopy. CW in Ginkgo biloba disks were dark brown in color, and the OW and LW were light brown in color. CW and OW showed abrupt transitions from earlywood to latewood, while LW showed a gradual transition. Cross sections of CW presented circular tracheids with angular outlines, many intercellular spaces, and varying sizes of lumens. Cross sections of LW and OW showed rectangular tracheids, fewer intercellular spaces, and varying sizes of lumens. In radial sections, CW showed an irregular arrangement of tracheids in earlywood, while LW and OW showed comparatively regular arrangements. Slit-like bordered pits on the tracheid cell wall, piceoid pits in the crossfield, and a few spiral checks were present in CW. LW and OW showed bordered pits with slightly oval-shaped apertures, as well as cuppresoid pits in the crossfields. Rays were primarily uniseriate, with few biseriate rays in the tangential sections of CW, LW, and OW. The tips of the tracheids were branched in CW but had a normal appearance in LW and OW.

• Journal of Ecology and Environment
• /
• 제36권4호
• /
• pp.439-448
• /
• 2013

Rhodophyta is one of major groups in the number of species and diversity of the marine algal flora. The occurrence of Korean 5 red algal species is reported for the first time on the list of Korean marine algal flora based on morphology: Ceramium pacificum, Cumathanmnion serrulatum, Gayliella fimbriata, Leptofauchea rhodymenioides, Sorella pulchra. Ceramium pacificum from Korea is recognized by complete cortication, many adventitious branches in a radial arrangement, 7-8 periaxial cells, and plant length of 1-2 cm. Cumathanmnion serrulatum is characterized by cartilaginous single main axis with a prominent midrib, serrulate blade, many higher orders of bladelets on each blade, and tetrasporagia produced near the midrib acropetally and then outwardly. Gayliella fimbriata is featured by clavate gland cell and 5-7 periaxial cells. Leptofauchea rhodymenioides is characterized by erect with flattened, dichotomously branched fronds, 1-2 cortical cells loosely arranged, 2-3 cell medullar layers with large colourless cells. Sorella pulchrais recognized by short branches produced alternately pinnate manner from margins of axial, mostly polystromatic frond, and tetrasporangial sori on the center of branches.