PURPOSES : The purpose of this study is to evaluate different types of Ground Penetrating Radar (GPR) testing for characterizing the road cavity detection. The impulse and step-frequency-type GPR tests were conducted on a full-scale testbed with an artificial void installation. After analyzing the response signals of GPR tests for detecting the road cavity, the characteristics of each GPR response was evaluated for a suitable selection of GPR tests. METHODS : Two different types of GPR tests were performed to estimate the limitation and accuracy for detecting the cavities underneath the asphalt pavement. The GPR signal responses were obtained from the testbed with different cavity sizes and depths. The detection limitation was identified by a signal penetration depth at a given cavity for impulse and step-frequency-type GPR testing. The unique signal characteristics was also observed at cavity sections. RESULTS : The impulse-type GPR detected the 500-mm length of cavity at a depth of 1.0 m, and the step-frequency-type GPR detected the cavity up to 1.5 m. This indicates that the detection capacity of the step-frequency type is better than the impulse type. The step-frequency GPR testing also can reflect the howling phenomena that can more accurately determine the cavity. CONCLUSIONS :It is found from this study that the step-frequency GPR testing is more suitable for the road cavity detection of asphalt pavement. The use of step-frequency GPR testing shows a distinct image at the cavity occurrences.
In this paper, we propose the low sidelobe digital FIR doppler filter bank synthesis algorithm through the Gradient Descent method and it can be practially appliable to coherent pulse doppler radar signal processing. This algorithm shows the appropriate calculation of tap coefficients or zeros for FIR transversal fiter which has been employed in radar signal processor. The span of the filters in the filter bank be selected at the desired position the designer want to locate, and the lower sidelobe level that has equal ripple property is achieved than one for which the conventional weithtedwindow is used. Especially, when we implemented filter zeros as design parameters it is possible to make null filter gain at zero frequency intensionally that would be very efficient for the eliminatio of ground clutter. For the example of 10 tap filter synthesis, when filter coefficients or zeros are selected as design parameters the corresponding sidelobelevel is reducedto -70db or -100db respectively and it has good convergent characteristics to the desired sidelobe reference value. The accuracy ofapproach to the reference value and the speed of convergence that show the performance measure of this algorithm are tuned out with some superiority and the fact that the bandwidth of filter appears small with respect to one which is made by conventional weighted window method is convinced. Since the filter which is synthesized by this algorithm can remove the clutter without loss of target signal it strongly contributes performance improvement with which detection capability would be concerned.
안전한 자율주행을 위해 정확한 자기위치 측위와 주변지도 생성은 무엇보다 중요하다. 고가의 고정밀위성항법시스템(Global Positioning System, GPS), 관성측정장치(Inertial Measurement Unit, IMU), 라이다(Light Detection And Ranging, LiDAR), 레이더(Radio Detection And Ranging, RADAR), 주행거리측정계(Wheel odometry) 등의 많은 센서를 조합하여 워크스테이션급의 PC장비를 사용하여 센서데이터를 처리하면, cm급의 정밀한 자기위치 계산 및 주변지도 생성이 가능하다. 하지만 과도한 데이터 정합비용과 경제성 부족으로 고가의 장비 조합은 자율주행의 대중화에 걸림돌이 되고 있다. 본 논문에서는 기존 단안카메라를 사용하는 Monocular Visual SLAM을 발전시켜 RTK가 지원되는 GPS를 센서 융합하여 정확성과 경제성을 동시에 확보하였다. 또한 HD Map을 활용하여 오차를 보정하고 임베디드 PC장비에 포팅하여 도심 도로상에서 RMSE 33.7 cm의 위치 추정 및 주변지도를 생성할 수 있었다. 본 연구에서 제안한 방법으로 안전하고 저렴한 자율주행 시스템 개발과 정확한 정밀도로지도 생성이 가능할 것으로 기대한다.
본 논문은 레이더와 카메라를 이용한 스마트 조명 시스템에서 실종자 탐지를 위한 색상 검출 방안을 제안한다. 최근 레이더와 카메라가 내장된 스마트 조명 시스템이 에너지 절약과 동시에 효율적인 실종자 검색에 도움이 된다고 보고 된 바 있다. 스마트 조명 시스템에서 레이다 센서는 조명 주변에 움직임을 감지한다. 조명 주변에서 움직임이 감지되면, 조명이 작동하고 카메라는 녹화기능을 수행한다. 여기서, 스마트 조명에 녹화된 영상은 실종자를 탐색하는 데 활용한다. 특히, 녹화된 영상에서 실종된 사람이 입고 있는 옷의 색상은 실종자를 찾는 데 중요한 단서 중의 하나이다. 이러한단서인 옷의 색상을 식별하기 위한 방법으로 색상 검출을 활용한다. 또한, 색상 검출 과정에서 배경의 영향을 줄이기 위해서 대상체를 고려한 ROI(Region of interest)를 적용한다. 실험 결과에 따르면, ROI를 적용한 경우 색상 검출의 정확도는 97% 이상을 보였다.
본 연구에서는 소형 X-밴드 이중편파 레이더의 수평반사도 (ZH), 차등반사도(ZDR), 교차상관계수(ρHV)의 RHI(range height indicator) 연직단면과 PPI (plan position indicator)의 고도각 경사거리(slant range) 빔의 프로파일 분석을 통하여 밝은 띠(bright band, BB)의 특성을 탐색하였다. 분석 결과, X-밴드 레이더의 이중편파 변수들을 이용하여 밝은 띠 영역을 명확히 탐지할 수 있었으며, 동시간대의 RHI 및 PPI 관측 자료를 이용한 이중적인 밝은 띠 영역을 탐색하여 그 결과가 일치함을 확인하였다. 이 결과를 토대로 현업에서 RHI 관측없이 PPI 볼륨관측만 수행하는 대형 강우레이더에도 본 연구의 PPI 고도각 경사거리에 의한 BB 탐색 방법을 적용함으로써 QPE (quantification of precipitation estimation)의 정확성을 향상시킬 수 있다.
Lee, Chi-Hun;Choi, Seungho;Lee, Young-Joong;Lee, Sang Jeong
Journal of Positioning, Navigation, and Timing
/
제11권3호
/
pp.173-179
/
2022
The satellite navigation deception technology disturbs the navigation solution of the receiver by generating a deceptive signal simulating the actual satellite for the satellite navigation receiver mounted on the unmanned aerial vehicle, which is the target of deception. A single spoofing technique that creates a single deceptive position and velocity can be divided into a synchronized spoofing signal that matches the code delay, Doppler frequency, and navigation message with the real satellite and an unsynchronized spoofing signal that does not match. In order to generate a signal synchronized with a satellite signal, a very sophisticated and high precision signal generation technology is required. In addition, the current position and speed of the UAV equipped with the receiver must be accurately detected in real time. Considering the detection accuracy of the current radar technology that detects small UAVs, it is difficult to detect UAVs with an accuracy of less than one chip. In this paper, we assume the asynchrony of a single spoofing signal and propose a region defense technique using multiple spoofing signals.
유역 상류의 소규모 산지 유역 또는 도시 배수분구 정도의 도시 유역은 지체시간이 수 십 여분에 불과하기 때문에 우량계만으로는 대응에 필요한 충분한 예측 선행시간을 확보하기 어렵다. 도시 및 소규모 산지 유역에서와 같이 지체시간이 짧은 유역에서 발생하는 돌발홍수는 더 이상 우량계만으로 예보가 불가능하다. 도달시간이 짧은 도시 및 산지에서는 지체시간 외에 강수 예측을 통한 홍수예보 선행시간을 확보하는 것이 매우 중요하다. 한강홍수통제소에서는 강우레이더 강우강도를 초단기 예측 모델인 Mcgill Algorithm for Precipitation-nowcast by Lagrangian Extrapolation(MAPLE) 알고리즘의 입력 자료로 활용하여 초단기 예측 강수 자료를 생산하고 있다. 한국건설기술연구원의 돌발홍수연구센터는 한강홍수통제소에서 생산하고 있는 초단기 예측 강수 자료를 입력 자료로 하여 돌발홍수 예측 시스템을 구축하였고 2019년부터 동네규모의 1시간 전 돌발홍수정보를 제공하고 있다. 본 연구에서는 돌발홍수연구센터에서 구축한 돌발홍수 예측 시스템을 설명하고 2019년도에 발생한 수재해 사례를 분석하여 전국 도시·산지·소하천 돌발홍수 예측 시스템의 예측 정확도를 검증하였다. 돌발홍수 예측 시스템의 정확도 검증에는 총 31개의 수재해 사례를 적용하였고 예측 정확도는 Probability of Detection (POD) 기준으로 90.3%로 매우 높게 나타났다.
전 세계적인 기후변화로 재해발생빈도가 증가하고 있으며, 국내에서도 이례적인 폭우 및 장마현상이 발생되고 있다. 이러한 기상이변현상은 가뭄, 홍수 등으로 이어져 2차피해를 유발할 수 있으므로 주기적인 모니터링과 신속한 탐지가 중요하다. 수체탐지를 위하여 광학영상을 활용한 연구가 지속적으로 이루어지고 있으나, 폭우를 동반하여 발생하는 홍수를 탐지하기 위해서는 구름의 영향으로 탐지하기 어렵다는 한계를 대변하기 위해 전천후 주야에 관계없이 관측가능한 합성개구레이더(synthetic aperture radar, SAR)를 활용한 연구가 필요하다. 본 연구에서는 개방데이터로서 24시간 이내에 수집 가능한 Sentinel-1 SAR 영상을 활용하여 최근 다양한 분야에서 활용되고 있는 딥러닝 알고리즘인 UNet을 적용하였다. 선행연구에서 SAR영상과 딥러닝 알고리즘을 이용하여 수체탐지 연구가 진행되고 있지만, 국내를 대상으로 소수의 연구만이 진행되었다. 따라서 SAR 영상의 딥러닝 적용가능성을 파악해보고자 UNet과 기존의 알고리즘인 임계값(thresholding) 방법을 비교하였으며, 5가지 지수와 Sentinel-2 normalized difference water index (NDWI)로 평가하였다. Intersect of union (IoU)로 정확도를 평가해 본 결과 UNet은 0.894, 임계값 방법은 0.699로 UNet의 정확도가 높은 것을 확인할 수 있었다. 본 연구를 통해 딥러닝 기반 SAR영상의 적용가능성을 확인할 수 있었으며, 고해상도의 SAR영상과 딥러닝 알고리즘을 적용한다면, 국내를 대상으로 주기적이고 정확한 수체의 변화탐지가 가능할 것이라 기대된다.
본 논문은 주행중 차량에 장착된 카메라의 자세 변화를 카메라 외부 파라미터의 변화로 간주하고, 이의 추정을 통하여 도로의 요철과 전방 도로의 기울기 변화 등에 강건한 차선 검출 알고리즘을 제안한다. 제안하는 알고리즘에서 차선은 실세계 좌표에서 좌우가 평행하고 고정된 폭을 가진다 가정하며, 카메라 움직임을 고려한 연속된 영상들의 병합된 특징맵에서 B-snake를 이용하여 차선 검출과 카메라 외부 파라미터 추정이 동시에 수행된다. 실험을 통하여 카메라 외부 파라미터에 영향을 주는 주행 도로 환경의 변화에 강건한 차선 검출 결과를 확인하였으며, 추정된 카메라 외부 파라미터의 정확성은 전방 차량에 대한 레이더 실측 거리와의 비교를 통해 확인했다.
본 논문에서는 FMCW(frequency modulated continuous wave) 레이다 센서를 활용한 사람과 사물을 분류하는 시스템 설계 및 구현 결과를 제시한다. 해당 시스템은 다중 객체 탐지를 위한 레이다 센서 신호처리 과정과 객체를 사람 및 사물로 분류하는 딥러닝 과정을 수행한다. 딥러닝의 경우 높은 연산량과 많은 양의 메모리를 요구하기 때문에 경량화가 필수적이다. 따라서 CNN (convolution neural network) 연산을 이진화하여 동작하는 BNN (binary neural network) 구조를 적용하였으며, 실시간 동작을 위해 하드웨어 가속기를 설계하고 FPGA 보드 상에서 구현 및 검증하였다. 성능 평가 및 검증 결과 90.5%의 다중 객체 구분 정확도, CNN 대비 96.87% 감소된 메모리 구현이 가능하며, 총 수행 시간은 5ms로 실시간 동작이 가능함을 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.