• 제목/요약/키워드: Rad4

검색결과 309건 처리시간 0.029초

Isolation and Characterization of 4-(2,4-Dichlorophenoxy)Butyric Acid-Degrading Bacteria from Agricultural Soils

  • Park, In-Hyun;Ka, Jong-Ok
    • Journal of Microbiology and Biotechnology
    • /
    • 제13권2호
    • /
    • pp.243-250
    • /
    • 2003
  • Eight numerically dominant 4-(2,4-dichlorophenoxy) butyric acid (2,4-DB)-degrading bacteria and three pairs of bacteria showing syntrophic metabolism of 2,4-DB were isolated from soils, and their phylogenetic and phenotypic characteristics were investigated. The isolates were able to utilize 2,4-DB as a sole source of carbon and energy, and their 2.4-DB degradative enzymes were induced by the presence of 2.4-DB. Analysis of 16S rDNA sequences indicated that the isolates were related to members of the genera, Variovorax, Sphingomonas, Bradyrhizobium, and Pseudomonas. The chromosomal DNA patterns of the isolates obtained by polymerase-chain-reaction (PCR) amplification of repetitive extragenic palindromic (REP) sequences were distinct from each other. Four of the isolates had plasmids, but only one strain, DB 1, rad a transmissible 2,4-D degradative plasmid. When analyzed with PCR using primers targeted to the tfdA, B, and C genes, only strains DB2 and DB9a produced DNA bands of the expected sizes with the tfdA and C primers, respectively. All of the isolates were able to degrade 2,4-D as well as 2,4-DB, suggesting that the degradation pathways of these compounds were closely related to each other, but respiratory activities of many isolates adapted to 2,4-DB metabolism were quite low with 2,4-D.

건축물 유형에 따른 라돈 저감 효과 평가 (Evaluation for Effectiveness of Radon Mitigation on Dwellings and Public Buildings in Korea)

  • 이동현;류승훈;조정흠;서성철
    • 한국산업보건학회지
    • /
    • 제24권4호
    • /
    • pp.518-527
    • /
    • 2014
  • Objectives: The adverse health effects attributed to exposure to radon have been well known over the world. However, the efforts for prevention and mitigation of radon have not been taken in Korea so far. The purpose of this study was to evaluate the effectiveness of mitigation methods applied for various types of houses and public buildings with high level of radon. Methods: Based on the results of "National Radon Survey" performed by the National Institute of Environmental Research(NIER) in 2010-2012, we selected 30 candidate buildings consisting of 20 houses and 10 public buildings with greater than $148Bq/m^3$ of radon level. We measured the concentration of radon in 30 buildings, using E-PERMs and RAD-7 during January to March of 2013. More than five E-PERMs and one RAD-7 per house were installed for seven days. Ten houses and five public buildings were finally chosen to be mitigated after mainly considering the level of radon and the location of buildings nationwide. Three mitigation methods such as Sealing, two types of Active Ventilation(window-shaped and wall-typed ventilations), and Active Soil Depressurization(ASD) were applied, and the concentrations of radon were measured before and after mitigation, respectively. To evaluate the effectiveness of mitigation methods, reduction rates of radon were calculated and Wilcoxon's signed-rank test was performed. Results: The mean concentration of 15 buildings just before radon mitigation was $297.8Bq/m^3$, and most of the buildings were located in Gangwon, Chungbuk, Chungnam, and Daegu areas(73.3%), and built in 1959-1998. The level of radon decreased from 48% to 90% and kept the below recommendation limit of $148Bq/m^3$ after installation of radon mitigation. Among mitigation methods applied, the reduction rate(58.7-90.4%) of radon attributed to ASD was the greatest than that of other methods, followed by Active Ventilation(48.4-78.4%) and Sealing(<22%). The effectiveness of radon reduction by window-shaped Active Ventilation(63.2-75.2%) was relatively better than that of wall-typed Active Ventilation(48.4-54.3%). Conclusions: The results of this study indicate that ASD could be more effective for radon mitigation. Moreover, our findings would be background information in future for making the strategy for radon mitigation nationwide, as well as for developing Korean-version of mitigation techniques according to types of dwellings in Korea.

DNA Microarray 분석을 통한 한우 부위별 특이 마커 유전자의 발굴 (Identification of Cuts-specific Myogenic Marker Genes in Hanwoo by DNA Microarray)

  • 이은주;신유미;이현정;윤두학;전태훈;이용석;최인호
    • Journal of Animal Science and Technology
    • /
    • 제52권4호
    • /
    • pp.329-336
    • /
    • 2010
  • 본 연구는 소의 부위별 근육에 특이하게 발현하는 유전자 마커를 발굴하여 소고기의 부위를 과학적으로 판명할 수 있는 기술을 개발하고자 실시하였다. 이러한 연구 목표 아래 먼저 사태(Beef shank), 등심(Longissimus dorsi), 양지(Deep pectoral), 홍두깨(Semitendinosus) 부위의 근육조직에서 MSC (myogenic satellite cell, 근육줄기세포)를 순수 분리하고 이를 MFC (myotube-formed cell; 근관이 형성된 세포)로 분화시키거나 ALC (adipocyte-like cell; 지방세포와 유사한 세포)로 이형분화 시킨 후 3가지의 세포로 부터 각각의 RNA를 추출하였다. 이렇게 추출한 RNA는 24,000개의 bovine oligo-nucelotide (70 mer)가 집적된 microarray를 이용해 4개의 조직 중 1개의 조직에서만 MSC의 분화(MFC) 또는 이형분화 과정에서 mRNA의 발현이 증감을 보이는 유전자 135개를 먼저 발굴하였다. 135개의 유전자에 대해 microarray 분석에 사용한 동일한 RNA를 이용하여 real-time PCR 기술로 검증한 결과 총 29개의 유전자가 microarray 분석 결과와 유사함을 보였다. 29개의 유전자를 다시 4개 부위의 생체 조직에서 추출한 RNA를 이용해 real-time PCR 방법으로 분석한 결과 TS (thymi- dlyate synthase), TE (tropoelastin), RAD52(similar RAD52 motifcontaining protein 1), unknown gene), MLC2 (myosin light 2, regulatory cardiac, slow), TXNIP (thioredoxin-interating protein) 6개의 유전자만이 다른 부위에 비해 사태 부위에서 현저한 발현의 차이를 나타냈다. 결론적으로 본 연구를 통해 소 부위별 근육을 구분할 수 있는 과학적 기술의 토대를 확립하였다.

Rpn10p is a Receptor for Ubiquitinated Gcn4p in Proteasomal Proteolysis

  • Seong, Ki Moon;Baek, Je-Hyun;Ahn, Byung-Yoon;Yu, Myeong-Hee;Kim, Joon
    • Molecules and Cells
    • /
    • 제24권2호
    • /
    • pp.194-199
    • /
    • 2007
  • GCN4 is a typical eukaryotic transcriptional activator that is implicated in the expression of many genes involved in amino acids and purine biosyntheses under stress conditions. It is degraded by 26S proteasomes following ubiquitination. However, the immediate receptor for ubiquitinated Gcn4p has not yet been identified. We investigated whether ubiquitinated Gcn4p binds directly to Rpn10p as the ubiquitinated substrate receptor of the 26S proteasome. We found that the level of Gcn4p increased in cells deleted for Rpn10p but not in cells deleted for RAD23 and DSK2, the other ubiquitinated substrate receptors and, unlike Rpn10p, neither of these proteins recognized ubiquitinated Gcn4p. These results suggest that Rpn10p is the receptor that binds the polyubiquitin chain during ubiquitin-dependent proteolysis of Gcn4p.

Cone-beam CT로부터 제작된 측모 두부계측방사선사진의 정확도 평가 (The reliability of the cephalogram generated from cone-beam CT)

  • 강지영;김광원;임성훈
    • 대한치과교정학회지
    • /
    • 제37권6호
    • /
    • pp.391-399
    • /
    • 2007
  • 최근 computed tomography (CT) 데이터로부터 실제 두부계측방사선사진 촬영기에서 촬영한 사진과 동일한 확대율을 갖는 두부계측방사선사진을 형성할 수 있는 기능을 갖춘 소프트웨어(Accurex, CyberMed, Seoul, Korea)가 소개되었다. 이에 본 연구에서는 cone-beam CT (이하 CBCT) 데이터로부터 이 소프트웨어를 이용하여 제작된 측모 두부계측방사선사진과 기존의 두부계측방사선사진촬영기로 촬영된 측모 두부계측방사선사진에서 각각 두부계측방사선사진 분석을 시행하여 그 차이를 비교함으로써 소프트웨어를 통해 CBCT로부터 제작된 측모 두부계측방사선사진의 활용 가능성을 평가하고자 하였다. 20명의 교정 환자를 대상으로 CBCT와 측모 두부계측방사선사진을 동시에 촬영하였다. CBCT로부터 제작된 측모 두부계측방사선사진과 기존 방식의 측모 두부계측방사선사진에서 두부계측 방사선사진 분석을 시행한 후 두 사진의 계측치의 차이를 paired t-test로 검정하였다. 23개의 계측치들 중, 20개 항목에서는 통계학적으로 유의한 차이가 관찰되지 않았으나, U1-FH, Mx6 to PTV, Maxillomandibular difference의 항목에서는 유의한 차이가 나타났다 이러한 차이는 CBCT로부터 형성된 측모 두부계측방사선사진의 해상도가 낮아 일부 해부학적 지표를 확인하기 어렵기 때문이며, 임상에서 CBCT로부터 제작된 측모 두부계측방사선사진을 porion, PTV, condylion과 같은 일부 해부학적 지표를 이용하지 않는 SNA, SNB, U1 to SN, IMPA, interincisal angle 등 흔히 사용되는 간단한 측모 두부계측방사선사진 계측에 활용 가능할 것이다.선 병용요법은 절제 불가능한 원발성 간암의 증상호전 및 국소적 치료에 효과가 있는 것으로 생각되며 생존율 및 부작용 등에 관해서는 앞으로 연구가 더 진행되어야 할 것으로 생각된다.용 선형가속기의 전자선 방출구에 장착된 산란판과 조사면을 조정하는 cone에 의하여 발생되는 저 에너지 산란전자선이 alanine dosimeter에 측정된 것으로서 에너지가 증가될수록 오염 정도가 증가되었다. 본 실험을 통하여 지금까지 고에너지 전자선량계측에서 전리상에 의한 전기량 측정과 산란선이 없는 단일 에너지로만 간주하여 계산하였던 전자선 흡수선량 측정방법을 직접 흡수선량 측정이 가능한 Alanine/ESR dosimetry로서 교정하는 것이 바람직하다고 생각한다.$6\%$, 수술이 필요하였던 환자는 $1\%$로 합병증의 증가 없이 A점에 8900cGy, 직장에 7300cGy정도의 국소치료가 가능함을 보여 주었으나 생존율에 대한 추후 분석이 따라야 할 것으로 사료된다.보면 6,000rad이하에서 20/63$(34.9\%)$의 실패율에 비하여 6,000rad이상일 때는 10/49$(20.4\%)$의 실패율이었다. 연령 벨로는 $40\~49$세에서 실패율(14/41 $24.1\%$)이 많았다. 본 성적으로 보아서 생존율은 여러 저자들과 큰 차이가 없음을 알 수 있었고 A점 선량은 8,000rad 이상, B점은 6,000rad이상이 조사되어야 적정선량이 됨을 시사해 주고 있다.\%$가 대부분이 하루 세끼 식사를 규칙적으로 하고 있었으며 식사속도는 허겁지겁 빨리 섭취하는 경우가 남자는 $31.0\%$,

돈분 및 음식물쓰레기 혼용 혐기소화 시 황화수소 가스 모니터링 (Monitoring of Hydrogen Sulfide in Anaerobic Co-digestion of Swine Manure and Food Waste)

  • 신중두;성시우;김현욱;김삼권;이명선
    • 유기물자원화
    • /
    • 제16권4호
    • /
    • pp.43-49
    • /
    • 2008
  • 본 연구의 목적은 석유화학에너지를 대체하기 위해 바이오가스 생산을 위한 돈분 및 음식물쓰레기 혼용 혐기소화 시 황화수소가스 농도 및 발생비율을 모니터링 한 것이었다. 바이오가스 생산을 위한 혼합혐기 소화는 휘발성 고형물 2%기준 다양한 돈분 및 음식물쓰레기 혼합비율하에서 시럼병을 이용하여 수행하였다. 황화수소가스 발생비율은 처리별 소화기간에 따라 다양하다 할지라도, 수급원료를 돈분만을 이용한 경우는 음식물 쓰레기와 비교할 때 황화수소 발생량은 2.4배 낮게 나타난 것으로 관측되었다. 돈분과 음식물쓰레기 혼합비율에 따른 황화수소가스 농도에 미치는 영향에 대해서는 음식물쓰레기 혼합비율이 높으면 높을수록 황화수소 농도가 높게 나타났다. 황화수소가스 평균 농도는 돈분처리, 0.1452% 에서부터 음식물쓰레기 처리, 0.3420% 까지 다양 하였다. 돈분 및 음식물쓰레기 혼용 혐기발효 시 바이오가스 조성비율은 메탄가스가 53.2%, 이산화탄소 23.9%, 황화수소 0.3% 및 수분을 포함한 기타 22.7%로 이루어져 있는 것으로 나타났다.

  • PDF

Interative Feedback Tuning for Positive Feedback Time Delay Controller

  • Tsang Kai-Ming;Rad Ahmad B.;Chan Wai-Lok
    • International Journal of Control, Automation, and Systems
    • /
    • 제3권4호
    • /
    • pp.640-645
    • /
    • 2005
  • Closed-loop model-free optimization of positive feedback time delay controllers for dominant time delay systems is presented. Iterative feedback tuning (IFT) is applied to the tuning of positive feedback time delay controller. Three experiments are carried out to perform the model-free gradient descent optimization. The initial controller parameters and duration in specifying the cost function are suggested. The effects of step size, filter function and time weighting function on the performance of the optimized controlled are given. Simulation and experimental studies are included to demonstrate the effectiveness of the tuning scheme.

입체각을 이용한 관골구와 대퇴골두의 접촉영역 측정 (The solid angle estimation of acetabular coverage of the femoral head)

  • 최교환;임제택;김선일
    • 전자공학회논문지S
    • /
    • 제35S권2호
    • /
    • pp.79-88
    • /
    • 1998
  • We developed a method for the solid angle estimation of acetabular coverage of the femoral head in 3D space. The superior half of the femoral head is modeled as part of a sphere. And the tangent lines connecting from a set of points of the acetabular outline to the center of the fitted sphere are obtained. The lines passthrough the unit sphere whose center is the same as that of the femoral head. The interesecting points form a boundary on the unit sphere. With the points on the unit sphere, we calculate the covered area of the femoral headand estimate the solid angle. Solid angle is defined asthe suface area within the boundary on the unit sphere. In this measurements, the solid angle of normal subjects is on an average 4.3(rad) and the corresponding acetabular coverage is 68%. Unlinke the conventional methods, this solid angle estimation shows real 3D acetabular coverage.

  • PDF

저 주파수용 7-dial Inductive Voltage Divider 제작과 특성분석 (Fabrication and Its Characteristics of 7-dial Inductive Voltage Divider for Low Frequency)

  • 김한준;강전홍;이래덕;한상옥
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제53권5호
    • /
    • pp.305-308
    • /
    • 2004
  • The 7-dial inductive voltage divider(IVD) for application at low frequency range which can precisely divide the in put voltage up to resolution of $10^{-7}$ was fabricated by using the toroidal cores made by super-mumetal strips of 0.025 mm thick and special decade switches. The cores have the initial permeability of 200.000 and magnetic flux density of 0.5 T. The inphase and quadrature ratio errors for a fabricated 7-dial IVD are found to be less than $\pm$4${\times}$$10^{-7}$ and $\pm$5${\times}$$10^{-6}$ rad(k=2), respectively. by calibration using the IVD calibration system of KRISS. The fabrication techniques used and uncertainty evaluation are discussed in this paper.

X-LIFTING MODULES OVER RIGHT PERFECT RINGS

  • Chang, Chae-Hoon
    • 대한수학회보
    • /
    • 제45권1호
    • /
    • pp.59-66
    • /
    • 2008
  • Keskin and Harmanci defined the family B(M,X) = ${A{\leq}M|{\exists}Y{\leq}X,{\exists}f{\in}Hom_R(M,X/Y),\;Ker\;f/A{\ll}M/A}$. And Orhan and Keskin generalized projective modules via the class B(M, X). In this note we introduce X-local summands and X-hollow modules via the class B(M, X). Let R be a right perfect ring and let M be an X-lifting module. We prove that if every co-closed submodule of any projective module P contains Rad(P), then M has an indecomposable decomposition. This result is a generalization of Kuratomi and Chang's result [9, Theorem 3.4]. Let X be an R-module. We also prove that for an X-hollow module H such that every non-zero direct summand K of H with $K{\in}B$(H, X), if $H{\oplus}H$ has the internal exchange property, then H has a local endomorphism ring.