• 유통과학연구
• /
• 제6권2호
• /
• pp.5-19
• /
• 2008

본 연구에서는 냉장, 냉동 창고의 기초 자료가 부족하여, 불완전하기 때문에 이러한 기초자료를 제공하기 위하여 냉장 냉동 창고의 일반현황을 제시하는 데 목적이 있다. 조사내용은 냉장 냉동 창고의 일반적인 현황으로는 매출액, 자본금(출자금), 창고종류별 보유현황, 보관면적, 냉장냉동 시설용량 등과 설비현황으로는 랙의 유무, 건축물 구조 및 층고, 모유설비현황 등을 조사하였다. 조사결과에 따르면 지역별 분포는 수도권과 부산지역이 전체의 86.7%로 대부분을 차지하였으며 이들 지역이 평균보관면적 또한 큰 것으로 나타났다. 또한 전체 업체의 80%이상이 보세장치장을 보유하고 있는 것으로 조사되었으며, 냉장 냉동 창고의 면적 및 용량은 고른 분포를 보였다. 건축물 구조는 철근 콘크리트 구조가 대부분이었으며 설비의 경우 랙 설치 업체가 전체의 25%로 나타나 설치율이 낮았으며 랙의 설치여부와 자본금 및 매출액 규모와는 통계적 유의성을 보이지 않았다. 또한 보유설비는 화물용 승강기, 정보시스템, 도크 순이었으며 하역장비로는 지게차가 평균 9.1대, 리치스태커는 평균 2.2대 인 것으로 조사되었다. 본 조사가 국내 냉장 냉동 산업의 실태파악과 예측, 발전에 기초가 될 것으로 생각하며 향후 좀 더 세밀한 연구가 추가적으로 진행되어야 할 것이다.

• 한국융합학회논문지
• /
• 제9권4호
• /
• pp.23-29
• /
• 2018

건설현장에서 흔히 발생하는 안전관리 문제점 중 시정조치 지연으로 인해 발생하는 재해율을 낮추기 위해, 기존의 시스템 중 점검 후 시정조치를 할 때까지 발생하는 시간을 단축하기 위하여 사전에 사고유형 데이터베이스를 구축하고 점검시 유사도 검사를 이용하여 점검자에게 문제점을 실시간으로 알려주어 현장에서 바로 시정조치를 수행할 수 있는 시스템을 모델링하여, 안전사고에 보다 적극적으로 대처할 수 있는 시스템을 연구하였다. 연구 결과 90 %이상의 개방 효과와 60 %이상의 안전사고 감소율이 있음을 알 수 있었다. 이 시스템을 기반으로 음성 인식과 딥러닝을 결합하여 보다 효과적인 시스템을 지속적으로 연구 할 것이다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.358-361
• /
• 2002

The millirneterwave high-T$_{c}$ superconducting(HTS) down-converter sub-system with the HTS/III-V integrated mixer as the central device is demonstrated first. The constituent components of HTS down-converter sub-system such as a single balanced type integrated mixer with rat-race coupler, a cavity type bandpass filter (26 GHz), and a HTS planar lowpass filter(1 GHz), semiconductor LNA and IF-power amplifier, a driving electronic module for A/D converter, and a Stirling type mini-cooler module were combined into an International stand- and rack of 19-inch. From the RF(-61 dBm, 26.5GHz)and LO signal(-1 dBm, 25.6 GHz), IF signal(0dBm, 0.9 GHz) agreed with simulated results is obtained.d.

• 한국자동차공학회논문집
• /
• 제3권1호
• /
• pp.143-154
• /
• 1995

This study investigates the response characteristics of a four-cylinder four-stroke turbocharged diesel engine by using computer simulation and experiments when a rapid acceleration is applied to the fuelpump rack. In the theoretical analysis, linearization method is used to avoid the difficulty on the complex nonlinear functions. Comppressor exit pressure, pressure and temperature of turbine inlet, and turbocharger speed are chosen as the independent variables of transfer functions which represent the dynamic characteristics of the turbocharger system, and expressed as the functions with respect to the time. Experiments on the same eigine system are also carried out to prove the validity of theoretical study. Further, this study carried an experiment for improving transient response performance by injecting air into the inlet manifold under the rapid accelerating conditions. The effects of air injection on the response performances are also represented at varying conditions such as injection pressure, injection period, accelerating rate, accelerating time, engine speed and load.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.58-60
• /
• 2004

This paper presents a design and characteristics analysis of an SRM drive for EPS application. A rack mounted EPS system is considered in this paper. In the unrestricted design conditions, motor parameters are determined for sufficient torque and speed with some restrictions. For the smooth torque generation and simple circuit of power system, 12/8 motor drive is considered. With FEM and magnetic circuit analysis, redesigned motor is simulated to meet the requirement of specifications. Effectiveness of the suggested SRM drive for EPS application is verified by redesigned motor drive tests.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권12호
• /
• pp.587-594
• /
• 2003

This paper presents a design and characteristic analysis of an SRM drive for EPS(Electrically Power Steering) application. A rack mounted EPS system is considered in this paper. A conventional driving room space and mechanical structure are considered in a design stage. In the restricted design conditions, motor parameters are determined for sufficient torque and speed. For the smooth torque generation and simple circuit of power system, 12/8 motor drive is considered. With FEM and magnetic circuit analysis, designed motor is simulated to meet the requirement of specifications. Effectiveness of the suggested SRM drive for EPS application is studied by the drive tests of a prototype motor.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 추계학술대회 논문집
• /
• pp.61-62
• /
• 2012

본 논문에서는 10kW급 리튬계열 에너지 저장장치 (ESS;Energy storage system)의 전기화학적 온도특성을 분석하였다. 70개 $LiFePO_4$ 단위 셀의 직렬결합(70S1P)으로 이루어진 ESS의 온도특성 분석을 위해 여름(7월)과 겨울(1월)일때의 ESS Tray/Rack/Cell 전압(표준편차) 및 온도데이터(최대값/최소값)의 통계처리를 실시하였다. 실험결과를 통해, 주변 외기온도에 영향을 최소화한 안정적인 ESS의 최적구축을 위한 가이드 라인을 제시할 수 있다.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2451-2460
• /
• 2000

In order to minimize straightness error of deflected shaft, a geometric adaptive straightness controller system is studied. A multi-step straightening and a three-point bending process have been developed for the geometric adaptive straightness controller. Load-deflection relationship, on-line identification of variations of material properties, on-line springback prediction, and real-time hydraulic control methodology are studied for the three-point bending process. By deflection pattern analysis and fuzzy self-learning method in the multi-step straightening process, a straightening point and direction, desired permanent deflection and supporting condition are determined. An automatic straightening machine has been fabricated for rack bars by using the developed ideas. Validity of the proposed system is verified through experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.190-192
• /
• 2003

This paper presents a design and characteristics analysis of an SRM drive for EPS application. A rack mounted EPS system is considered in this paper. In the unrestricted design conditions, motor parameters are determined for sufficient torque and speed. For the smooth torque generation and simple circuit of power system, 12/8 motor drive is considered. With FEM and magnetic circuit analysis, redesigned motor is simulated to meet the requirement of specifications. Effectiveness of the suggested SRM drive for EPS application is verified by redesigned motor drive tests.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.635-641
• /
• 1994

Recently, Improving the energy efficiency of a pneumatic system and reducing the consumption of compressed air were a concern of scholars at domestic and abroad. The using fields of a pneumatic system are widely used in factory automation of manufacturing line, chemical factories with explosiveness danger and petroleum industries etc. In particular, Pneumatic cylinder is applied to feeding work of workpiece, jig tools and press mechanism, reciprocation and rotary motion with rack and pinion. In this study, The experimental apparatus consisted to pneumatic cylinder, dual supply pressure regulator and solenoid valve. The dual supply pressure regulator connected to outlet port of solenoid valve. The supply pressure (4.5kgf/cm$\^$2/) of compressed air goes into the rodless chamber 1 to drive the pistion rod forward which is named working stage. The supply pressure(2kgf/cm$\^$2/) of compressed air goes into the rod chamber 2 to drive the piston rod backward which is named no-working stage. Accordingly, The research results of this study can be obtained to Energy-Saving Effects of the compressed air about 35%.