• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.106-111
• /
• 2024

A triboelectric nanogenerator is a promising energy harvester operated by the combined mechanism of electrostatic induction and contact electrification. It has attracting attention as eco-friendly and sustainable energy generators by harvesting wasting mechanical energies. However, the power generated in the natural environment is accompanied by low frequencies, so that the output power under such input conditions is normally insufficient amount for a variety of industrial applications. In this study, we introduce a non-contact rotational triboelectric nanogenerator using pedaling and gear systems (called by P-TENG), which has a mechanism that produces high power by using rack gear and pinion gear when a large force by a pedal is given. We design the system can rotate the shaft to which the rotor is connected through the conversion of vertical motion to rotational motion between the rack gear and the pinion gear. Furthermore, the system controls the one directional rotation due to the engagement rotation of the two pinion gears and the one-way needle roller bearing. The TENG with a 2 mm gap between the rotor and the stator produces about the power of 200 ㎼ and turns on 82 LEDs under the condition of 800 rpm. We expect that P-TENG can be used in a variety of applications such as operating portable electronics or sterilizing contaminated water.

• ETRI Journal
• /
• v.10 no.3
• /
• pp.157-164
• /
• 1988

In proportion to the increased density in electronic packaging from chip to system levels of telecommunication system, thermal management is becoming a vital subject to save the cost of the electronic product and to maintain high reliability. The key to the successful application of the thermal management technique is the capability to predict the equipment thermal behaviors in early stage of system development and product design. This paper describes the application of correlations of natural convection to TDX-10 digital switching system, which has been under the 5 year development project since 1987, in order to predict equipment temperature and thermal behaviors whihin a rack.

• International Journal of Automotive Technology
• /
• v.6 no.6
• /
• pp.599-604
• /
• 2005

A functional suspension model is proposed as a kinematic describing function of the suspension, that represents the relative wheel displacement in polynomial form in terms of the vertical displacement of the wheel center and steering rack displacement. The relative velocity and acceleration of the wheel is represented in terms of first and second derivatives of the kinematic describing function. The system equations of motion for the full vehicle dynamic model are systematically derived by using velocity transformation method of multi-body dynamics. The comparison of test and simulation results demonstrates the validity of the proposed functional suspension modeling method. The model is computationally very efficient to achieve real-time simulation on TMS 320C6711 150 MHz DSP board of HILS (hardware-in-the-loop simulation) system for ECU (electronic control unit) evaluation of semi-active suspension.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.6 s.183
• /
• pp.72-80
• /
• 2006

Electric Power Steering (EPS) mechanism has become widely equipped in passenger vehicle due to the increasing environmental concerns and higher fuel efficiency. This paper describes the development of concurrent simulation technique and simulation integration technique of EPS control system with a dynamic vehicle system. A full vehicle model interacting with EPS control algorithm was concurrently simulated on a single bump road condition. The dynamic responses of vehicle chassis and steering system resulting from road surface impact were evaluated and compared with proving ground experimental data. The comparisons show reasonable agreement on tie-rod load, rack displacement, steering wheel torque and tire center acceleration. This concurrent simulation capability was employed fur EPS performance evaluation and calibration as well as for vehicle handling performance integration and synthesis.

• IE interfaces
• /
• v.9 no.2
• /
• pp.203-218
• /
• 1996

This paper deals with a Direct-Input-Output Manufacturing System (DIOMS) which has a number of machine centers placed along a built-in automated storage/retrieval system (AS/RS). During its operations, the storage/retrieval(S/R) machine picks up a pallet from the pickup/deposit port of a machine center and then moves it either to an empty rack opening of the AS/RS for temporary storage or to place it on the port of another machine center for subsequent operation. The machine layout problem in DIOMS is formulated as an integer mathematical programming whose objective is to minimize the total expected distance of the loaded S/R machine during a production period. Recognizing the limit of the exact solution procedure(the Branch and Bound method), two improvement-type heuristics are proposed. One is based on the simulated annealing method and the other the pairwise interchange method. The validity of the heuristics is examined with example problems.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.43-50
• /
• 2002

In the present study, reduction of harmful exhaust gas in a diesel engine using stratified injection system of dual fuel (diesel fuel and methanol) was tried. The nozzle and fuel injection pump of conventional injection system were remodeled to inject dual fuel in order from the same injector. The quantity of each fuel was controlled by micrometers, which were mounted at rack of injection pumps. The injection ratio of dual fuel was certificated by volumetric ratio in injection quantity test. Cylinder pressure and exhaust gas were measured and analyzed under various supply condition of duel fuel. We confirmed that combustion of dual fuel was performed successful1y by using modified injection system in a D.I. diesel. Soot and NOx are simultaneously reduced by stratified injection without large deterioration of thermal efficiency, but THC and CO are relatively increased.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.289-292
• /
• 2007

An object color identification and classification embedded system realization for uninhabited stock management is presented in this paper. The embedded system is realized by using ultrasonic sensor to extract the object and distance, and detecting binary image from USB CCD camera. The algorithm is identified by comparing the reference pattern with the color pattern of input image, and move to the settled rack at the store. The experimental result leads to use the uninhibited stock management with practice as a robot.

• The Korean Journal of Malacology
• /
• v.28 no.1
• /
• pp.45-54
• /
• 2012

We investigated environmental characteristics of the tidal flat oyster aquafarms to clarifyeffects of the tidal flat environmental factors on growth and mortality of the tidal flat oyster Crassostrea gigas by the Net Bag Rack Culture System in two districts in Western Korea. In this study, we have carried out the basic environmental investigation on growth of the single tidal flat, water quality and sediments, etc. in Taean and Seosan districts, Choongcheongnam-do, where the single tidal flat oyster aquaculture have been performed by the net bag rack culture system. In June 2011 when the final survey carried out at the two districts in western Korea, the mortality in Seosan district was higher than that in Tae-an district. Judging from the results of growth and mortality of the single tidal flat oysters investigated at two sites of Jinsan-ri in Taean and Chang-ri in Seosan districts, two results of Taean district showed higher growth and lower mortality than those of Seosan district. It is assumed that the proper acceptable density possible for growth of the tidal flat seeds and the secure of economics, in case of plastic cultivate net with the size of $50{\times}80cm$, are about 200 individuals. In this study, It was clarified that selection of the suitable sites, the input into the net bag of high quality oyster seeds and selective dispersion in the optimal density of the single tidal flat oyster have an effect on growth and mortality of the tidal flat oyster.

• Journal of the korean Society of Automotive Engineers
• /
• v.7 no.2
• /
• pp.45-54
• /
• 1985

Recently, the problem of exhaust gas pollution is increasingly being aggravated by the active use of the Diesel engine. For the fuel-injection system which affects the composition of exhaust gas from the Bosch type single-hole nozzle in the Diesel engine, a mathematical model was set up to study pressure variations in the high pressure pipe, the injection rate, and the needle lift. The fundamental equations of the mathematical model have been solved by the Newton Raphson Method applying the Finite Diffrence Method. The effective stroke of the injection pump plunger due to a change in engine rpm was calculated by the measurement of Control Rack, Pinion, and Plunger sizes and by the use of Characteristic Curve of Governor. The computed results for the pressure variations in the high pressure pipe and needle lift at 800 rpm and 1000 rpm are in good agreement with experimental ones in general. By a developed program, the effects of other various parameters will by calculated for the performance of the fuel-injection system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.313-317
• /
• 2005

Precision motor dynamometer is requiring for nano positioning control performance recently. Particularly, linear motor is using rapidly and the dynamometer needs is increasing. In this study, a precision control dynamometer is designed using MR (Magnetic Rheological) damper. The ultra precision motor system including the driver and controller is tested using the MR damper dynamometer. This dynamometer is able to measure torque for rotary motor or traction force with linear positioning accuracy for linear motor system.