• 제목/요약/키워드: RV

검색결과 577건 처리시간 0.025초

저압 배선용차단기 절연회복특성 파악을 위한 절연회복전압 측정기법 연구 (Study on Measurement Method of Dielectric Recovery Voltage to analysis Dielectric Recovery Characteristic of Molded Case Circuit Breaker)

  • 송태헌;조영만;고광철
    • 조명전기설비학회논문지
    • /
    • 제29권8호
    • /
    • pp.49-54
    • /
    • 2015
  • Molded Circucit Breaker(MCCB) is a most widely used device to protect loads from the over-current in low power level distribution system. When the MCCB interrupts the over-current, the arc discharge occurred between fixed contact and moving contact to create hot gas. By the Lorentz force due to arc current, the occurred arc is bent to the grids. The grids extend and cool and divide it for arc extinguish. In the majority cases, the MCCB protects loads by interrupting the over-current successfully but in some cases the re-ignition is occurred by hot-gas created during process of interruption. The re-ignition arises when the recovery voltage(RV) is more higher than the recovery strength between contacts and it leads to interruption fault. Therefore to find out the dielectric recovery characteristics of protecting device has a great importance for preventing interruption fault. In this paper, we studies measurement method of the dielectric recovery characteristics considering inherent attribute of the MCCB. To measure the dielectric recovery characteristic of MCCB, we makes an experiment circuit for applying the over-current and the randomly recovery voltage. The measurement methode to find out the dielectric recovery voltage of the MCCB was established and the result was based on experiment results.

최대 전압 강하에 비례하는 무효전류 공급 루프를 이용한 DFIG 풍력단지의 계층전압제어 (Hierarchical Voltage Regulation of a DFIG-based Wind Power Plant Using a Reactive Current Injection Loop with the Maximum Voltage Dip for a Grid Fault)

  • 박건;김진호;강용철
    • 전기학회논문지
    • /
    • 제65권8호
    • /
    • pp.1334-1339
    • /
    • 2016
  • In a power grid that has a high wind power penetration, the fast voltage support of a wind power plant (WPP) during the grid fault is required to stabilize the grid voltage. This paper proposes a voltage control scheme of a doubly-fed induction generator (DFIG)-based WPP that can promptly support the voltage of the point of common coupling (PCC) of a WPP during the grid fault. In the proposed scheme, the WPP and DFIG controllers operate in a voltage control mode. The DFIG controller employs two control loops: a maximum voltage dip-dependent reactive current injection loop and a reactive power to voltage loop. The former injects the reactive power in proportion to the maximum voltage dip; the latter injects the reactive power in proportion to the available reactive power capability of a DFIG. The former improves the performance of the conventional voltage control scheme, which uses the latter only, by increasing the reactive power as a function of the maximum voltage dip. The performance of the proposed scheme was investigated for a 100-MW WPP consisting of 20 units of a 5-MW DFIG under various grid fault scenarios using an EMTP-RV simulator. The simulation results indicate that the proposed scheme promptly supports the PCC voltage during the fault under various fault conditions by increasing the reactive current with the maximum voltage dip.

Positive Offset Mho 계자 상실 계전기 보호 협조 정정에 관한 연구 (A Study on Protective Coordination Setting of Positive Offset Mho Loss of Field Relay)

  • 김광현;박지경;김준혁;김두웅;강성범;김철환;유영식;양정재;고윤태
    • 전기학회논문지
    • /
    • 제65권8호
    • /
    • pp.1326-1333
    • /
    • 2016
  • It is important to clear the fault and prevent resulting in damage to power system. Although the frequency of generator internal fault is relatively low, it can lead to incalculable damage to power system as well as generator. Especially, loss of field on generator can cause the generator to lose synchronism for a short time if it is not removed promptly. Therefore, it is needed to conduct research on loss of field relay for detecting or clearing the loss of field. However, the setting of the relay may vary in generator operator or engineer, and the relay is not coordinated well with other elements associated with loss of field. In this paper, we address specifically the coordination of positive offset mho loss of field relay which is one of the protection schemes for loss of field. Computer simulations are performed by using ElectroMagnetic Transients Program-Restructured Version (EMTP-RV) based on actual data.

양대동맥 좌심실기시증의 수술요법 (Surgical Treatment of Double Outlet Left Ventricle)

  • 노준량;김응중
    • Journal of Chest Surgery
    • /
    • 제18권4호
    • /
    • pp.635-642
    • /
    • 1985
  • Double outlet left ventricle [DOLV] is a rare cardiac anomaly in which both great arteries arise entirely, or predominantly above the morphologically left ventricle. About 100 cases of DOLV have been reported in the literatures by 1984. We have experienced eight cases of DOLV at Seoul National University Hospital during the period from October 1981 to July 1905. Ages of the patients were ranged from 12 months to 24 years old, and chief complaints on admission were frequent URI and DOE in 5 cases and cyanosis in other 3 cases. In all eight patients, Cardiac catheterization and cineangiography were performed but pre-operative diagnoses were incorrect except one case [VSD in 2 cases, DORV in 2cases, c-TGA in 2 cases and TOF in one case] We have performed total corrective surgery in seven patients. In case I, patch closure of VSD aligning aorta and pulmonary artery with LV, ligation of proximal pulmonary artery and the use of external valved conduit from RV to PA have been employed. In other 6 cases, intraventricular repair using boomerang shaped Dacron patch with correction of associated anomalies were employed. In remaining one patient who had coexistent PDA and coarctation of aorta, we have performed coarctoplasty and PDA ligation initially and the patient is waiting for subsequent total corrective procedure. In seven patients whom we have performed total corrective surgery, there is one hospital mortality due to right heart failure and one complication of complete heart block necessitating permanent pacemaker implantation. All survivors are doing well in follow up period of 9 months to 4 years. To our knowledge, this is the first report of surgical experiences for DOLV in the Korean literature.

  • PDF

우심실유출로협착증의 수술예후에 영향을 미치는 인자에 관한 연구 (A Study about Factors Influencing on the Postoperative Prognosis of the Right Ventricular Outflow Trac Obstruction)

  • 최강주
    • Journal of Chest Surgery
    • /
    • 제27권6호
    • /
    • pp.435-443
    • /
    • 1994
  • Surgical procedures to relieve congenital right ventricular outflow tract[RVOT] obstruction of heart were performed on 125 patients from September 1985 to August 1992. There were 65 males and 60 females. Ages ranged from 7 months to 33 years with a mean age of 8 years. All the patients were divided into three main groups[I, II, III] depending on the presence or absence of cyanosis and combined anomalies. The patient were classified into two groups; A and B according to the outcome after surgical repair. Group A included the patients who had a good postoperative outcome with or without mild complications such as wound disruption, or hydrothorax. Group B included the patients who had a poor outcome including hospital death and significant postoperative complications such as heart failure, low output syndrome, respiratory failure, hepatic failure and others. And the results were summarized as follows. 1. There were no significant differences in age, body surface area and aortic dimension among the group I, II, and III, but there were significant differences among groups in pulmonary arterial dimension, ACT[aortic cross clamping time], TBT [total bypass time], preoperative and postoperative ratio of systolic pressure of right and left ventricles [pre PRV/RV and post PRV/LV], and the size of Hegar dilator which passed through the RVOT postoperatively [p<0.05]. 2. In the group A and B, there were significant differences in pulmonary arterial dimension [group A:1.6$\pm$0.5 cm, group B:1.9$\pm$0.6 cm], ACT [group A:102.3$\pm$ 46.0 minute, group B:76.1$\pm$46.1 minute], TBT [group A:133.9$\pm$56.6 minute, group B:94.9$\pm$51.9 minute], pre PRV/LV [group A:1.06$\pm$0.24, group B:0.8$\pm$0.32], post PRV/LV [group A:0.58$\pm$0.18, group B:0.43$\pm$0.16].It has been concluded that postoperative prognosis of RVOT obstruction was influenced by pulmonary arterial dimension, ACT, TBT, severity of RVOT obstruction [pre PRV/LV] and post PRV/LV.

  • PDF

Characterization of the v-cath Gene of Bombyx mori Nuclear Polyhedrosis Virus K1

  • Lee, Kwang Sik;Li, Jianhong;Je, Yeon Ho;Woo, Soo Dong;Sohn, Hung Dae;Jin, Byung Rae
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제9권2호
    • /
    • pp.217-223
    • /
    • 2004
  • A cathepsin L-like cysteine protease, v-cath, encoded by the baculovirus has been shown to playa role in host liquefaction. We have identified a v-cath gene in the silkworm virus, Bombyx mori nuclear polyhedrosis virus (BmNPV) K1 strain. The 969 bp v-cath has an open reading frame of 323 amino acids. A putative cleavage site and catalytic sites were conserved in BmNPV-K1 v-cath. The predicted three-dimensional structure of BmNPV-K1 v-cath revealed that the overall fold of BmNPV-K1 v-cath is similar to that of other proteases of the papain family. The deduced amino acid sequence of BmNPV-K1 v-cath showed 98% and 97% protein sequence identity to BmNPV T3 strain and to Autographa californica nuclear polyhedrosis virus, respectively. The BmNPV-K1 v-cath differed at 4 amino acid positions from BmNPV T3. The v-cath gene in BmNPV-K1 genome is located on the EcoRV 6 kb and XhoI 9 kb fragments. Northern hybridization analysis of BmNPV K1 v-cath gene revealed that it is expressed late in infection.

어군의 음향학적 형태 및 분포특성과 어종식별에 관한 연구 1.한국 연근해 멸치어군의 형태 및 분포특성과 종식별 실험 (Study on the Acoustic Behaviour Pattern of Fish Shool and Species Identification 1. Shoal Behaviour pattern of anchovy (Engraulis japonicus) in Korean waters and Species Identification Test.)

  • 김장근
    • 수산해양기술연구
    • /
    • 제34권1호
    • /
    • pp.52-61
    • /
    • 1998
  • We studied behaviour pattern of anchovy (Engraulis japonicus) shoal by a method of shoal echo integration and tested species identification by a method of artificial neural network using the acoustic data collected in the East China Sea in March 1994 and in the southern coastal waters of the East Sea of Korea in March 1995. Between areas, frequency distribution of 10 shoal descriptors was different, which showed characteristics of shoal behaviour in size, bathymetric position and acoustic strength. The range and mean of shoal size distribution in length and height was wider and bigger in the southern coastal waters of the East Sea than in the East China Sea. Relative shoal size of China Sea. Fractal dimension of shoal was almost same in both areas. Mean volume reverbration index of shoal was 3 dB higher in the southern coastal waters of the East Sea than in the East China Sea. The depth layer of shoal distribution was related to bottom depth in the southern coastal waters of the East Sea, while it was between near surface and central layer in the East China Sea. Principal component analysis of shoal descriptors showed the correlation between shoal size and acoustic strength which was higher in the southern coastal waters of the East Sea, than in the East China Sea. Correlation was also found among the bathymetric positions of shoal to some degree higher in the southern coastal waters of the East Sea than in the East China Sea. The anchovy shoal of two areas was identified by artificial neural network. The contribution factor index (Cio) of the shoal descriptors between two areas were almost identical feature. The shoal volume reverberation index (Rv) was showed the highest contribution to the species identification, while shoal length and shoal height showed relatively high negative contribution to the species identification.

  • PDF

The Korean Spinal Neurosurgery Society ; Are We Reimbursed Properly for Spinal Neurosurgical Practices under the Korean Resource Based Relative Value Scale Service?

  • Kwon, Woo-Keun;Kim, Joo Han;Moon, Hong Joo;Park, Youn-Kwan
    • Journal of Korean Neurosurgical Society
    • /
    • 제60권1호
    • /
    • pp.47-53
    • /
    • 2017
  • Objectives : The Korean Resource Based Relative Value Scale (K-RBRVS) was introduced in 2001 as an alternative of the previous medical fee schedule. Unfortunately, most neurosurgeons are unfamiliar with the details of the K-RBRVS and how it affects the reimbursement rates for the surgical procedures we perform. We summarize the K-RBRVS in brief, and discuss on how the relative value (RV) of the spinal neurosurgical procedures have changed since the introduction in 2001. Methods : We analyzed the change of spinal procedure RVs since 2001, and compared it with the change of values in the brain neurosurgical procedures. RVs of 88 neurospinal procedures on the list of K-RBRVS were analyzed, while 24 procedures added during annual revisions were excluded. Results : During the past 15 years, RVs for spinal procedures have increased 62.8%, which is not so different with the cumulative increase of consumer prices during this time period or the increase rate of 92.3% for brain surgeries. When comparing the change of RVs in more complex procedures between spinal and brain neurosurgery, the increase rate was 125.3% and 133%, respectively. Conclusion : More effort of the society of spinal surgeons seems to be needed to get adequate reimbursement, as there have been some discrimination compared to brain surgeons in the increase of RVs. And considering the relative underestimation of spinal neurosurgeons' labor, more objective measures of neurospinal surgeons' work and productivity should be developed for impartial reimbursement.

Delamanid, Bedaquiline, and Linezolid Minimum Inhibitory Concentration Distributions and Resistance-related Gene Mutations in Multidrug-resistant and Extensively Drug-resistant Tuberculosis in Korea

  • Yang, Jeong Seong;Kim, Kyung Jong;Choi, Hongjo;Lee, Seung Heon
    • Annals of Laboratory Medicine
    • /
    • 제38권6호
    • /
    • pp.563-568
    • /
    • 2018
  • Background: Delamanid, bedaquiline, and linezolid have recently been approved for the treatment of multidrug- and extensively drug-resistant (MDR and XDR, respectively) tuberculosis (TB). To use these drugs effectively, drug susceptibility tests, including rapid molecular techniques, are required for accurate diagnosis and treatment. Furthermore, mutation analyses are needed to assess the potential for resistance. We evaluated the minimum inhibitory concentrations (MICs) of these three anti-TB drugs for Korean MDR and XDR clinical strains and mutations in genes related to resistance to these drugs. Methods: MICs were determined for delamanid, bedaquiline, and linezolid using a microdilution method. The PCR products of drug resistance-related genes from 420 clinical Mycobacterium tuberculosis strains were sequenced and aligned to those of M. tuberculosis H37Rv. Results: The overall MICs for delamanid, bedaquiline, and linezolid ranged from ${\leq}0.025$ to >1.6 mg/L, ${\leq}0.0312$ to >4 mg/L, and ${\leq}0.125$ to 1 mg/L, respectively. Numerous mutations were found in drug-susceptible and -resistant strains. We did not detect specific mutations associated with resistance to bedaquiline and linezolid. However, the Gly81Ser and Gly81Asp mutations were associated with resistance to delamanid. Conclusions: We determined the MICs of three anti-TB drugs for Korean MDR and XDR strains and identified various mutations in resistance-related genes. Further studies are needed to determine the genetic mechanisms underlying resistance to these drugs.

Propulsion System Design and Optimization for Ground Based Interceptor using Genetic Algorithm

  • Qasim, Zeeshan;Dong, Yunfeng;Nisar, Khurram
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년 영문 학술대회
    • /
    • pp.330-339
    • /
    • 2008
  • Ground-based interceptors(GBI) comprise a major element of the strategic defense against hostile targets like Intercontinental Ballistic Missiles(ICBM) and reentry vehicles(RV) dispersed from them. An optimum design of the subsystems is required to increase the performance and reliability of these GBI. Propulsion subsystem design and optimization is the motivation for this effort. This paper describes an effort in which an entire GBI missile system, including a multi-stage solid rocket booster, is considered simultaneously in a Genetic Algorithm(GA) performance optimization process. Single goal, constrained optimization is performed. For specified payload and miss distance, time of flight, the most important component in the optimization process is the booster, for its takeoff weight, time of flight, or a combination of the two. The GBI is assumed to be a multistage missile that uses target location data provided by two ground based RF radar sensors and two low earth orbit(LEO) IR sensors. 3Dimensional model is developed for a multistage target with a boost phase acceleration profile that depends on total mass, propellant mass and the specific impulse in the gravity field. The monostatic radar cross section (RCS) data of a three stage ICBM is used. For preliminary design, GBI is assumed to have a fixed initial position from the target launch point and zero launch delay. GBI carries the Kill Vehicle(KV) to an optimal position in space to allow it to complete the intercept. The objective is to design and optimize the propulsion system for the GBI that will fulfill mission requirements and objectives. The KV weight and volume requirements are specified in the problem definition before the optimization is computed. We have considered only continuous design variables, while considering discrete variables as input. Though the number of stages should also be one of the design variables, however, in this paper it is fixed as three. The elite solution from GA is passed on to(Sequential Quadratic Programming) SQP as near optimal guess. The SQP then performs local convergence to identify the minimum mass of the GBI. The performance of the three staged GBI is validated using a ballistic missile intercept scenario modeled in Matlab/SIMULINK.

  • PDF