• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.2
• /
• pp.101-110
• /
• 2007

This study was performed to find out hazardous factors in the loaded works of muscular skeletal disorders(MSDs) for four company attached to dining workers from October 2005 to June 2006. The results are summarized as follows. 1. 42.5% of workers in study group were 40-50 years old, and females were higher than males, and the average of body weight was 70kg, 57kg in males and females, respectively. Working time per day was mostly 7-9hours, and the rate of worker who had never education and training was 46%. 2. The upper part and right part of body were higher than lower part and left part in symptoms of muscular skeletal disorders. Body parts which complained of symptoms were the order of right shoulder(55%), right arm(54%), right hand,(40%) waist(35%), leg(25%), and neck(24%). 3. The results of evaluation in the loaded works of muscular skeletal disorders to cooking, dish supply, preparing side dish, and washing the dishes and cleaning the floor of cooking room using RULA and OWAS checklists was action level 4(potential hazards, needs of change workplace), and the result of evaluation using back compressive force needed control measures as 779.27 lbs~1,274.04 lbs. In a view point of the result of this study, large dining rooms should be designed by ergonomic technology for the work surface height, width, and depth. The height of carrying car should be lower to 70cm, and repetitiveness and handling weight should be reduced by mechanical means, and education and training also should be performed for all of workers positively.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.2
• /
• pp.161-171
• /
• 2006

The objectives of this study were to ergonomically evaluate varying tasks performed in a general hospital and to propose their improving measures based on the evaluation results. The tasks found in the hospital were largely classified into two groups of manual materials handling and awkward posture related tasks. Ergonomic tools of NLE, 3-D SSPP and RULA were used for evaluating workload of the tasks. The major findings are: 1) L5/S1 compressive force of patient transferring by one person exceeded the maximum permissible limit(6,400N) by NIOSH. The L5/S1 compressive forces for most of the patient transferring tasks by 2-4 persons were larger than the action limit (3,400N), and the tasks by five persons were analyzed to be safe in the view of L5/S1 compressive force; 2) patient repositioning tasks by 2-3 persons were hazardous on the basis of L5/S1 compressive force, while most of the tasks by 4-5 persons were safe; 3) many tasks performed in wards were found to be stressful, most of which resulted from improper heights of their working tables or working points. Of varying tasks in general hospitals, patient transferring was the most stressful. Based on the results of this study and high prevalence of musculoskeletal disorders from other studies, it is recommended that the ergonomics program be introduced and enforced for doing improving activities systematically

• Physical Therapy Korea
• /
• v.19 no.2
• /
• pp.69-79
• /
• 2012

Importance of the work-related musculoskeletal disorders (WMSDs) has been increasing in the hospital industry such as health care industry and financial industry. This study investigated in order to identify the factors like general, occupational and ergonomically characteristics of the subjects related to musculoskeletal disorders (MSDs) of physical therapists (PTs). Ergonomic tools of rapid upper limb assessment (RULA) were used for evaluation workload of the tasks. Prevalence of MSDs were 13 PTs (26.0%) for neck, 31 PTs (62.0%) for shoulder, 9 PTs (18.0%) for arm/elbow, 27 PTs (54.0%) for hand/wrist, 28 PTs (56.0%) for back, 14 PTs (28.0%) for leg/foot. The analysis of the rate of the pain intensity showed that 53.5% subjects experience moderate pain and 14.0% subjects experience severe pain. Factors which were general characteristics, for example, height, ergonomically characteristics such as 'Posture Score A' were related musculoskeletal subjective symptoms in logistic analysis (p<.05). Among physical therapists, action level of RULA were action level 2 (6.0%), action level 3 (52.0%), action level 4 (42.0%). Physical therapists were estimated one of the highest risk factor in this study. This study suggested that the need of preventive education and program for PTs (physical therapists). Comprehensive and systematic management plans should be established to include both ergonomic and sociopsychological aspects.

• Journal of the Korean Society of Safety
• /
• v.26 no.6
• /
• pp.71-78
• /
• 2011

The aim of study was to reduce risk factors of musculoskeletal disorders, and prevent it according to evaluation and analysis of its symptoms survey, and work postures which doing much frequently. This study was conducted by 64 firefighters. It was surveyed physical burden levels, distribution of musculoskeletal symptoms, and analized work postures by using ergonomics tools, such as Rapid Entire Body Assesment(REBA), Rapid Upper Lim Assessment(RULA), NIOSH Lifting Equation(NLE). Physical burden levels, and distribution of musculoskeletal symptoms were surveyed according to frequency analysis, and the analysis of above tools were presented figures and scores. The all the results of REBA were that risk level was "High", action level was "Need soon" and the results of RULA were "The results are required detailed survey and immediate improvement" at Require rescue person handling, fire hose, hybraulic rescue equipment, universal axe work postures. The occurrence possibility of musculoskeletal disorders of fire fighters is quite high due to instability postures, excessive physical work and so on. Thus, making various efforts to prevent disorders, and improving working environment is necessary continuously.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.83-90
• /
• 2011

It has been very important to have an exact evaluation for risk factors in order to prevent WMSDs(Work-related Musculoskeletal Disorders). However, most WMSDs evaluation methods have always been some problems of possibilities associated with subjective evaluation. Therefore, this study tried to conduct a sort of usability analysis on three major evaluation methods(OWAS, RULA, REBA). Specifically, major subjects in the study consisted of three parts as follows; comparison of the results between experienced and inexperienced observers, analysis for the consistency of the results in terms of different evaluation times, and analysis for the consistency of the results in terms of different job characteristics(based on the part of the automobile). The results of the study were summarized as follows; 1) There was statistically significant difference of the results by RULA and by REBA between experienced and inexperienced observers. This might be due to the fact that experienced observers have had better ability to detect the important working posture during evaluation. However, the results by OWAS did not give any significantly different results between experienced and inexperienced observers, 2) All three checklists applied by experienced subjects did not show any single result significantly different in terms of different evaluation times. This might have to do with high intra-observer reliability from some of previous studies, 3) The five parts of an automobile were selected as five major jobs with different job characteristics in the automobile industry. Specifically, they were door part, front part(hood, etc.), inside part(dash board, seats, etc.), rear part(trunk etc.), and bottom part. All three methods did not show any significant differences for the results from each observers. Further study on this subject would eventually provide a sophisticated evaluating guidelines for WMSDs regarding determination of observer-specific evaluation, identification of repetitive number of evaluations for stable results for each checklist, determination of job-specific evaluation methods, and so on.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.3
• /
• pp.266-273
• /
• 2021

Objective: The objective of this study was to suggest improvement methods for investigations and systems through a review of musculoskeletal risk factor investigation reports conducted in the workplace. Methods: A total of 34 reports on musculoskeletal risk factor investigations were reviewed. To confirm the appropriateness of the evaluation, reevaluation was conducted through a field investigation using other evaluation tools. In order to understand the effectiveness of the improvement plan, a survey was conducted with those in charge of tasks with ergonomic burdens. Results: As a result of performing a field survey using the work sampling method recommended by the KOSHA (Korea Occupational Safety and Health Agency) for ten tasks, eight tasks were determined to pose an ergonomic burden. When 30 tasks were evaluated with RULA (rapid entire body assessment), 90% of them were evaluated at a higher level than the results of the workplace survey. Among the improvement measures, only 36% of the field workers affirmed them, and in only 19% of the workplaces were actual improvements made. Conclusions: In order to improve the ergonomic investigation system for risk factors in the ergonomic burden task, it is necessary to secure the objectivity of the evaluation performed by the institution and enable the active participation of workers in improvement activities.

• Journal of the Korean Society of Safety
• /
• v.28 no.2
• /
• pp.73-77
• /
• 2013

Leisure activities alter overland tourism into marine tourism according to a rise in national income. It is expected that the leisure boat with period of introduction in marine tourism will be developed rapidly. It needs to unite with marine technology, optimized layout design, interior design and so on in order to build a yacht of high quality. Because optimized layout design and interior design technique increase the added value of the yacht, it needs to be convergence technology between Ergonomics, Sensibility Ergonomics, and design technique. In this study, we analyzed traffic line of crews in a sailing yacht and assessed working posture using OWAS, RULA and REBA tools. Also we suggested tips of Ergonomic design in the sailing yacht.

• Korean Journal of Occupational Health Nursing
• /
• v.12 no.1
• /
• pp.39-49
• /
• 2003

The Purpose of this study is to identify the trends of studies on workers' musculoskeletal disorder and to suggest the direction of future research. 83 research article on workers' musculoskeletal disorder were reviewed. The results are as follows : 1. Studies on workers' musculoskeletal disorder have increased rapidly since 1996, but most of them were done by non-experimental design. 2. The most frequently selected subjects of studies are telephone operators and manufacturing workers. 3. The most frequently used instrument of studies is NIOSH's questionnaire & RULA (ergonomic work posture analysis). 4. The most frequently analysed variables relating to workers' musculoskeletal disorder are working years, hours of work a day, working process, and physical exercises. Therefore, it is needed to develop the management program of workers' musculoskeletal disorder and examine its effects.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.5
• /
• pp.119-125
• /
• 2008

Musculoskeletal disorders(MSDs) are one of the major issues in shipbuilding industry. Main risk factors of MSDs include manual handling of heavy weight, awkward posture, repetitive tasks, prolonged static muscle contraction, and so on. in this study, Using the three-dimensional digital human modeling and simulation method we made up a worker and work posture on a virtual environment. To verify this simulation we compared both traditional ergonomic analysis on a real worker and digital program analysis on a digital human. And this paper shows that it is possible to reduce the rate of MSDs in the shipbuilding industry because it means we can change poor posture mid surroundings into better ones.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.4
• /
• pp.465-472
• /
• 2011

Objective: The aim of this paper is to introduce ergonomic evaluation methods for agricultural work. Background: Work-related Musculoskeletal Disorders(WMSDs) became a major problem in agriculture industry recently. A number of ergonomics evaluation methods have been developed in order to evaluate the work load for preventing WMSDs. The workload evaluation methods were developed for manufacturing industry. Therefore, these ergonomic evaluation methods were used carefully in agriculture industry because work type in agriculture different from work type in manufacturing. Method: Various references of ergonomic evaluation methods such as OWAS, REBA, RULA, NLE and Snook table have been reviewed for agricultural work. Results: This paper presents the characteristics, the selection and application procedure of ergonomic evaluation methods for agricultural work. Application: These results can be used to provide baseline information for ergonomic evaluation methods.