• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2001.10a
• /
• pp.57-57
• /
• 2001

• Physical Therapy Korea
• /
• v.17 no.2
• /
• pp.25-32
• /
• 2010

The purpose of this study was to investigate the most effective and comprehensible method for the assessment of resting scapular position (RSP) and pain level (PL) in unilateral shoulder pain (USP). Fifty volunteers with USP were involved in the study. Resting scapular assessments of the patients' pain sides (PS) and non-pain sides (NPS) were evaluated. The assessment tools for RSP are: 1) sternal notch (SN) to coracoid process (CP) distance 2) 3rd thoracic spinous process (T3S) to posterolateral angle of acromion (PLA) distance 3) scapular index 4) 8th thoracic spinous process (T8S) to inferior angle of scapular (IAS) distance 5) supine measurement of pectoralis minor (PM) distance 6) standing PM distance 7) PM index (PMI) and 8) PM pain. The paired t-test was used to compare PS and NPS in RSP. Pearson correlation analysis was used to confer a relationship between the PL and RSP. The results of this study indicated that: 1) all the variables between the PS and NPS for RSP were statistically significant(p<.05) and 2) the PMI showed the strongest relationship in the correlation analysis between RSP and PL(p<.05, r=.37). Therefore, it can be concluded that there is a relationship between PMI and PL and it is suggested that an assessment tool using PMI to diagnose shoulder pain would be clinically effective.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.6
• /
• pp.715-727
• /
• 2004

This study was carried out to evaluate non-smoker's exposure levels to environmental tobacco smoke (ETS) in the air of offices in urban areas. A total of 65 offices were selected from two large cities, i.e. Daegu and Daejeon. The field sampling was conducted repeatedly in summer (1999) and winter (1999～2000). The measured ETS markers included respirable suspended particles (RSP as PM$_{40}$ ), vapor and particulate phase ETS markers, including nicotine, 3-ethnyl pyridine (3-EP), ultraviolet absorbing particulate matter (UVPM), fluorescing particulate matter (FPM), and solanseol in ETS particles (SolPM). RSP was measured gravimetrically by a microbalance. The particle samples were then used for the determination of particulate ETS markers by HPLC, while vapor phase markers determined by GC/NPD. The analytical methods were validated for repeatability, linearity, detection limits, and duplication precision. The concentrations of RSP and other ETS markers were significantly higher in smoking offices than non-smoking offices. Despite the similar smoking strength in each office for different seasons, the concentration levels of ETS components appeared to be higher in winter than summer. The contributions of ETS to RSP concentrations based on SolPM, FPM, and UVPM methods were estimated to be in the range of 15.2 ～ 25.3% in smoking offices, whereas 2.4 ～ 15.9% in non-smoking offices. The cooling and heating types did not affect significantly the concentrations of RSP and other ETS markers. Finally, further research issues were suggested to obtain more scientific information on the non-smoker's exposure to ETS with respect to the frame of risk assessment..

• International Commerce and Information Review
• /
• v.7 no.1
• /
• pp.171-194
• /
• 2005

The CMI Rules for Electronic Bills of Lading were drafted by the Comite Maritime International(CMI) and related specifically to EDI transfers of negotiable bills of lading. The CMI Rules are contractual in nature and the application of the CMI Rules is strictly voluntary. The method adopted in the CMI Rules to enable negotiation of the rights to cargo in a controlled method is based on the introduction of the ‘Private Key’. The Bolero service will be governed by a multilateral contract called the Bolero Rule Book which specifies the rights and responsibilities of Bolero and its users. The Title Registry and Bolero Bill of Lading provide a fully functional equivalent to the paper bill of lading. The Bolero Bill of Lading can be created, transferred, amended, and surrendered by way of designating to order party, blank endorsement, refusal by the transferee etc. In Japan, through TEDI Project, the RSP Model is introduced as e-trade solution like Bolero's Solution. The RSP Model Solution will be furnished through TC(Trade Chain) Server and RSP(Repository Service Provider) Server. The purpose of this paper is to analyze comparatively the CMI Rules and Bolero Bill of Lading and RSP Model of TEDI and to find the implications in this case study for quick introduction of electronic Bill of Lading.

• Journal of the Korean Society of Physical Medicine
• /
• v.11 no.2
• /
• pp.131-139
• /
• 2016

PURPOSE: The purpose of this study was to confirm the effect of exercise combined with scapular stabilizing on resting scapular position (RSP) in breast cancer-related lymphedema patients. METHODS: A total of 20 patients with lymphedema after mastectomy participated in the study. All assessments of the patients edema sides (ES) and non-edema sides (NES) were evaluated. The assessment tools used wad RSP. RSP are; 1) scapular index, 2) 8th thoracic spines process (T8S) to inferior angle of scapular (IA) distance, 3) standing pectoralis minor (PM) distance, and 4) PM index (PMI). All patients carried out a scapular stabilizing exercise seven times a week for 8 weeks. The collected data were analyzed with PASW 18.0. The statistical significance (${\alpha}$) was 0.05. RESULTS: According to the results, all the variable between the ES and NES for RSP were statistically significant (p<0.05) in the pre-test. After the exercise, the differences in T8S to IA distance and the PMI between the ES and NES weren't statistically significant. The results of the RSP showed a significant improvement in T8S to IA distance, standing PM distance, and PMI. CONCLUSION: The results of this study showed that, performing the scapular stabilizing exercise had a significant effect on improving RPS in breast cancer-related lymphedema patients.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.293-309
• /
• 2003

The purpose of this study was to analyze the kinematic variables of the right-straight punch(RSP) in boxing with three-dimensional analysis technical methods. The subjects are boxers who have been playing in national boxing representative team and the RSP is their special favorite technique, The right-straight punches were filmed on 16mm video cameras(30frames/sec.) The kinematic variables were temporal, postural and center of gravity(COG). The mean and the standard deviation of variables have been obtained and used as basic factors for examining characteristics of the RSP by out-boxers. From the data analysis and discussion, the following conclusions have been drawn. 1) Temporal variables It is a significant characteristic that LDJ and KDM s' the amount of elapsed time(EF) needed for both an attack and a defense were similar : ET for stretch-out of attack-arm was $0.52{\pm}0.04\;sec$. and return was $0.54{\pm}0.01\;sec$. Therefore, a defense motion is as important as an attack motion. 2) Posture variables When the subjects performed a RSP, the significant characteristic of the ankle angle was that it wasn't completely returned to the original position after stretching-out. Therefore it is necessary to do supplementary exercises, such as side steps, to move the center of gravity more effectively. The hee angle was not fully stretched either. In regard to the hip angle, it should be rotated with all strength to harmonize with the direction of movement. 3) Center of Gravity(COG) variables When both LDJ and KDM performed a RSP, a significant characteristic was the transformation of sagittal view rather than transverse or frontal views.

• The Journal of Korean Physical Therapy
• /
• v.35 no.3
• /
• pp.83-88
• /
• 2023

Purpose: This study was to investigate the effect of forward head posture (FHP) and round shoulder posture (RSP) on changes in muscle activities according to shoulder flexion and abduction tasks. Methods: Twenty-two male subjects with no history of neurological, musculoskeletal surgery or injuries, or pain in the spine region within the previous 3-month periods were recruited for this study. Craniovertebral angle (CVA) and Scapula Index were measured before performing 90° abduction and flexion tasks holding a 3kg dumbbell. Muscle activities were measured during the tasks. All measurements except height of the acromion were carried out in a sitting position at the height of the subject's knee angle of 90 degrees, and two tasks were randomly performed with the arm that the subject mainly use to throw the ball. The abduction and flexion angles were checked by the examiner using a goniometer beside the subject. Results: Correlation coefficient analysis between Scapular Index and upper trapezius muscle activity during shoulder abduction task showed significant positive correlation. No significant correlation was observed between CVA, Scapular Index, and other muscle activities. Conclusion: FHP showed increased muscle activation, making it difficult to change muscle activity under lower loads, and RSP was correlated with UT activation in shoulder abduction. Therefore, in the RSP, the loaded shoulder abduction is considered a potential risk factor for increasing shoulder muscle tension. This paper proposes an approach to treating RSP before FHP.

• Journal of the Korea Convergence Society
• /
• v.9 no.12
• /
• pp.123-128
• /
• 2018

The aim of this study was to determine the effects of the action observation and visual feedback on the alignment, pain and function of forward head posture(FHP) and round shoulder(RS). A total of 24 participants with FHP and RSP were randomly assigned to general exercise(GE, n=8), action observation(AO, n=8), and visual feedback(VF, n=8). All subjects were exercised three times a week for four weeks. The groups were assessed for craniovertebral angle(CVA), round shoulder posture(RSP), visual analog scale(VAS), and neck disability index(NDI) before and after exercise, There was a significant difference in CVA in the GE, AO and RSP, VAS and NDI were significantly different in all groups. AO was more effective than GE, VF for VAS. The results of this study suggest that action observation may be effective to improve the FHP and RS.

• Journal of Korea Foundry Society
• /
• v.39 no.2
• /
• pp.26-31
• /
• 2019

In this study, the mechanical characteristics and microstructure of hypereutectic Al-17Si-5Fe extruded alloys prepared by a rapid solidification process (RSP) were investigated. The hypereutectic Al alloy was fabricated by means of RSP and permanent casting. For RSP, the Al alloy melted at $920^{\circ}C$, cooling the specimens at a rate of $10^6^{\circ}C/s$ when the RSP was used, thus allowing the refining of primary Si particles more than when using permanent casting, at a rate of about 91%. We tested an extrusion RSP billet and a permanent-cast billet. Before the hot-extrusion process, heating to $450^{\circ}C$ took place for one hour. The samples were then hotextruded with a condition of extrusion ratio of 27 and a ram speed of 0.5 mm/s. Microstructural analyses of the extruded RSP method and the permanent casting method were carried out with OM and SEM-EDS mapping. The mechanical properties in both cases were evaluated by Vickers micro-hardness, wear resistance and tensile tests. It was found that when hypereutectic Al-17Si-5Fe alloys were fabricated by a rapid solidification method, it becomes possible to refine Si and intermetallic compounds. During the preparation of the hypereutectic Al-17Si-5Fe alloy by the rapid solidification method, the pressure of the melting crucible was low, and at faster drum speeds, smaller grain alloy flakes could be produced. Hot extrusion of the hypereutectic Al-17Si-5Fe alloy during the rapid solidification method required higher pressure levels than hot extrusion of the permanent mold-casted alloy. However, it was possible to produce an extruded material with a better surface than that of the hot extruded material processed by permanent mold casting.

• Journal of the Korean Ceramic Society
• /
• v.38 no.8
• /
• pp.710-715
• /
• 2001

반응소결공정(RSP : Reaction Sintering Process)을 이용하여 YF댸₃와 Fe₂O₃의 성분에 소결첨가재 Bi₂O₃를 첨가하여 YIG를 합성하였다. Bi₂O₃첨가량과 소결온도에 따른 YIG 소결체의 미세구조 및 자기적 특성변화에 대해 주사전자현미경, X-선 회절분석기 및 시료 진동형 자력계를 이용하여 조사하였다. 소량의 소결첨가재 Bi₂O₃첨가시 YIG 소결체의 격자상수는 12.387에서 12.420 Å으로 증가하였다. 이는 상대적으로 이온반경이 큰 Bi 이온이 12면체 Y 이온 자리로 치환되었기 때문인 것으로 여겨진다. Bi₂O₃를 1.0 wt% 첨가하였을 때 비교적 균질한 미세구조를 보였으며, 1350℃에서 소결한 YIG의 밀도가 이론밀도의 98% 이상의 치밀화를 보였다. Bi₂O₃가 0.0 wt%에서 1.5 wt%로 첨가량이 증가함에 따라 상온에서의 포화자화값(M/sub s/)은 조금씩 증가하는 경향을 보였으나 큰 변화는 없었다. 반응소결공정을 이용 YIG 소결시 소결첨가제 Bi₂O₃가 1.0 wt%이고, 소결온도 1350℃에서 비교적 우수한 소결특성과 자기특성을 가지는 YIG 소결체를 얻을 수 있었다.