• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.439-442
• /
• 2003

In this paper, a system that implementation of Access Control System Using Biometric System. Biometrics is science which deals with verifying or recognizing using physiological or behavioral characteristic Access Control System uses Biometric system to make an access control system. Biometrics goes under the study of bio-recognition or bio-measurement. It is a technology or study that identifies individuals using one's Biometric character. Access control system is a system used to identify one's entrance and exit, personal management, and security. Access control system can be joined with Biometric system to produce easier use and more sufficient effects. Access control system using Wiegand (Data Format) signal output, can replace earlier RF Card systems and make an access control (security) system. It uses RS-232, Rs-422 or TCP/IP type communication with the computer so an embedded system can be controlled using the software.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.11
• /
• pp.2419-2422
• /
• 2010

The current marine internal communication systems are usually composed of NMEA0183, NMEA2000, and MiTS protocols which are located on the physical layer based on RS-422, RS-485, CAN, and EtherNet. However, general vessel communication method have a weak point that must establish the extra private line. But, the power line communication has advantage over general vessel communication method as it uses AC220V/DC24V without changing line. Therefore, we will propose a new bridge based on the DC-PLC(power Line communication) technique which support the NMEA0183 protocol inside vessel network systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.183-186
• /
• 2010

This paper presents a stable real-time based FlexRay technology which is employed with a standard protocol of the marine electronic equipments and the bridge navigational watch alarm system (BNWAS). The traditional marine communications use NMEA communication protocols, and RS-232 and RS-422 techniques in the BNWAS, thus there are difficulty in seeking stability and reliability. To overcome such problems we utilize the FlexRay protocol technique to prevent data loss or error.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.494-498
• /
• 2004

In this paper, a system that implementation of Access Control System Using Biometric System. Biometries is science which deals with verifying or recognizing using physiological or behavioral characteristic Access Control System uses Bionietric system to make an access control system. Biometrics goes under the study of bio-recognition or bio-measurement. It is a technology or study that identifies individuals using one's Biometric character. Access control system is a system used to identify one's entrance and exit, personal management, and security. Access control system can be joined with Biometric system to produce easier use and more sufficient effects. Access control system using Weigand (Data format) signal output, can replace earlier RF Card systems and make an access control (security) system. It uses RS-232, Rs-422 or TCP/IP type communication with the computer so an embedded system can be controlled using the software.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.577-578
• /
• 2010

The current marine communication networks are usually composed of NMEA0183, NMEA2000, and MiTS protocols which are located on the physical layer based on RS-422, RS-485, CAN, and EtherNet. This paper proposes a new bridge based on the DC power line communication technique supported from the NMEA0183 to design inside marine systems.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2003.05a
• /
• pp.419-422
• /
• 2003

• Journal of Advanced Navigation Technology
• /
• v.12 no.5
• /
• pp.464-469
• /
• 2008

The RS-232C (Unbalanced serial) and RS-485 (balanced serial) are standard in serial communication. RS-485 uses a differential electrical signal, as opposed to unbalanced signals referenced to ground with the RS-232. Differential transmission, which uses two lines each for transmit and receive signal results in greater noise immunity and longer distances as compared to the RS-232C. The greater noise immunity and distance are big advantages in industrial environments. In general, one protocol on one serial interface is very normal application. In this study, we implemented multi protocols on one serial RS-485 interface and examine the performance and result with hanging multi equipments.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.18-24
• /
• 1995

This paper describes a multi-computer system developed for CIM(Computer Integrated Manufacturing) system, which combines single board computers and personal computers by using RS422/485 communication and LAN. The system adopts a concept of hot run back up system based on dual CUP system of host and supervisor structure. The dual CPU system and the single board computer are respectively developed using 32 bits microcomputer and 16 bits microprocessor. 8097BH. The multi communication between two types of system is done by using RS 422/485, and also data logging computers are linked with LAN.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.235-242
• /
• 2014

LED lighting control technique is one of the ongoing research areas for efficient management of LED lighting. In this paper, we design and implementation of LED street lighting remote control system which have a wired and wireless communication function for LED street lighting remote control. The implemented system can automatically dimming and individual(or consolidated) LED street lighting via RS-485/422 or Wi-Fi. In experimental results, the implemented remote control system was satisfactory for all of the desired functions.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.171-179
• /
• 2007

The Test Equipment for the upper stage of KSLV-I has following functions via umbilical cable interface; external power supply, command output such as discrete and analog, data acquisition, CS-I interface simulation for first stage of KSLV-I and RS-422 serial communication for PDU. The main purpose of UTE is the experiment or function verification of system-level upper stage. To realize this system, we used PXI control system. The UTE is consisted of the PXI control system, power supply, terminal block, internal harness, connector panel and so on. The software functions of UTE are classified by four blocks. These are Discrete/Analog I/O control, PDU RS-422 serial communication control, power supply GPIB control and UTE remote control. In this paper, we will describe the design on the hardware and software of UTE.