• The Journal of the Korea Contents Association
• /
• v.14 no.6
• /
• pp.255-261
• /
• 2014

The generation amount of radioactive waste has been rapidly increased by increase of the usage of radioisotope source in medical field. Especially, the use of the radioactive source of I-131 with short half-life of 8.02 days used in treatment of thyroid has been increased, and all of the wastes concerned have been disposed by means of the self-disposal method. IAEA proposed criteria for clearance level of waste which depends on the individual (10 ${\mu}Sv/y$) and collective dose (1 man-Sv/y), and concentration of each nuclide (IAEA Safety Series No 111-P-1.1, 1992 and IAEA RS-G-1.7, 2004). In this study, various radioactive wastes in medical fields are collected and measured for establishing the disposal methods and procedures of radioactive wastes. In addition, comparison evaluation of decay storage period between the half-life which was calculated by attenuation curve based on real measurement and analytical half-life is considered. With comparing the theoretical half-life and the effective half life(7.72 days) which was based on the decay equation of measured data, it is resulted in the theoretical half-life is longer than effective half-life. The storage period of radioactive waste for self-disposal may be curtailed. The result of this study will be proposed as ISO standard.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.835-842
• /
• 2009

DVB-SSP is a new broadcasting system for hybrid satellite communications, which supports mobile handheld systems and fixed terrestrial systems. However, a critical factor must be considered in upper layer decoding which including erasure Reed-Solomon error correction combined with cyclic redundancy check. If there is only one bit error in an IP packet, the entire IP packet is considered as unreliable bytes, even if it contains correct bytes. IF, for example, there is one real byte error, in an If packet of 512 bytes, 511 correct bytes are erased from the frame. Therefore, this paper proposed two kinds of upper layer decoding methods; LLR-based decoding and hybrid decoding. By means of simulation we show that the performance of the proposed decoding algorithm is superior to that of the conventional one.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.299-305
• /
• 2015

Modbus is a serial communications protocol, it has since become a practically standard communication protocol, and it is now a commonly available means of connecting industrial electronic devices. Therefore, it can be connected with all devices using Modbus protocol to the measurement and remote control on the ships, buildings, trains, airplanes and etc.. In this paper, we add the Modbus communication protocol to the existing lighting controller sensitivity to enable verification and remote control by external environmental factors, and also introduces a fuzzy inference system was configured by external environmental factors to control LED lighting. External environmental factors of temperature, humidity, illuminance value represented by the LED through a fuzzy control algorithm, the values accepted by the controller through the sensor. Modbus is using the RS485 Serial communication with other devices connected to the temperature, humidity, illumination and LED output status check is possible. In addition, the remote user is changed to enable it is possible to change the RGB values in the desired color change. Produced was confirmed that the LED controller output is based on the temperature, humidity and illumination.

• Advances in concrete construction
• /
• v.2 no.1
• /
• pp.13-27
• /
• 2014

The principal objective of this study is to deepen the characterization studies already led on sand concretes in previous works. Indeed, it consists in studying the effect of the sand type on the main properties of sand concrete: fracture and mechanical properties. We particularly insist on the determination of the fracture characteristics of this material which apparently have not been studied. To carry out this study, four different types of sand have been used: dune sand (DS), river sand (RS), crushed sand (CS) and river-dune sand (RDS). These sands differ in mineralogical nature, grain shape, angularity, particle size, proportion of fine elements, etc. The obtained results show that the particle size distribution of sand has marked its influence in all the studied properties of sand concrete since the sand having the highest diameter and the best particle size distribution has given the best fracture and mechanical properties. The grain shape, the angularity and the nature of sand have also marked their influence: thanks to its angularity and its limestone nature, crushed sand yielded good results compared to river and dune sands which are characterized by rounded shape and siliceous nature. Finally, it should further be noted that the sand concrete presents values of fracture and mechanical properties slightly lower than those of ordinary concrete. Compared to mortar, although the mechanical strength is lower, the fracture parameters are almost comparable. In all cases, the sand grains are debonded from the paste cement during the fracture which means that the crack goes through the paste-aggregate interface.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.11a
• /
• pp.257-270
• /
• 2005

Many studies states that improperly uprising of infrastructure may cause leading the forest degradation and canopy reduction in many tropical forest of Asian countries. Other studies revealed that habitat destruction and fragmentation, edge effects, exotic species invasions, pollution are provoked by roads. Similarly, environmental effects of road construction in forests are problematic. Similarly, many researches have been indicated that roads have a far greater impact on forests than simply allowing greater access for human use. Moreover, people using river as means of transportation hence illegal logging and felling cause canopy depletion in many countries. Therefore, it is important to comprehend the study about spatial relation of road, river and suburb followed by temporal change of forest canopy phenomena. This study also tried to examine the effect of road, river and suburb in forest canopy density change of Terai forest of Nepal from you 1988 to 2001. So, Landsat TM88, 92 and 001 and FCD (Forest Canopy Density) mapper were used to perform the spatial .elation of canopy density change. ILWIS (Integrated Land and Water Information System) which is GIS software and compatible with remote sensing data was used to execute analysis and visualize the results. Study found that influence of distance to suburb and river had statistically significance influenced in canopy change. Though road also influenced canopy density much but didn't show a statistical relation. It can be concluded from this research that understanding of spatial relation of factors respect with canopy change is quite complex phenomena unless detail analysis of surrounding environment. Hence, it is better to carry out comprehensive analysis with other additional factors such as biophysical, anthropogenic, social, and institutional factors for proper approach of their effect on canopy change.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.1
• /
• pp.50-63
• /
• 1998

This study investigated the effects of resin surface primers for rebase resins on the surface texture of denture base resins by the use of scanning electron microscopy. This study also evaluated the bond strength of rebase resins to denture base resin. The denture base resin in this study was Vertex RS (Dentimex Co., Ltd., Holland). The rebase resins used were Tokuso Rebase (Tokuyama Co., Ltd., Japan), Metabase (Sun Medical Co., Ltd., Japan), New True Liner(Harry J, Bosworth Co., Ill.), and Reverse (Nissin Co., Ltd., Japan). The test samples were divided into four parts: Group 1 : Treated with primer with brush. Group 2 : Immersed in the primer for 5 seconds. Group 3 : Immersed in the primer for 10 seconds. Group 4 : Immersed in the primer for 30 seconds. Control group : not treated with primer The results were as follows; 1. The bond strength of rebase resins to denture base resin is increased by application of primers. 2. Regardless of the rebase resin type, there was no significant difference among the bond strength in groups G1, G2, G3, G4. There was a significant difference with the control. (P<0.05) 3. Regardless of each group, the bond strength according to the rebase resin type was decreased in the following order: Tokuso Rebase, New Tru Liner, Reverse and then Metabase. 4. Under the scanning electron microscope, brush application produced a softening of the denture base surface. After immersion, all primers produced a spongelike structure on the denture base resin surface. The results of this study suggest that primers produce a significant effect by means of brush application, therefore it is recommended as the most convenient and logical procedure for application of the primers.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.19 no.1
• /
• pp.69-87
• /
• 1989

It is well known that the glucocorticoid induces osteoporosis by suppression of the osteoblast, but its effect on the osteoclast hRS some controversy whether it activates or suppresses the osteoclast. If the calcitonin, which is known to suppress the osteoclast, prevents the osteoporosis by glucocorticoid, then the suppression of the osteoclast by the glucocorticoid is not so significant. And if the calcitonin increases the osteoblastic activity, Tc-99m MDP uptake will be increased in spite of the glucocorticoid effect on the osteoblast. The immobilization operation was performed to the right leg of male Wistar rats weighing about 200gm. each. For 16 weeks after operation, rats were injected glucocorticoid alone or glucocorticoid anci calcitonin. The bone density was measured by means of photodensitometry under reference aluminum step wedge and Tc-99m MDP uptake was available to the index of the osteoblastic activity. 1. The bone density of femora! head was markedly reduced than that of femoral shaft following ration of cancellous and cortical components in both site. 2. Glucocorticoid caused decrease in bone density of spine and femur, md there is significantly increase of it when medication of glucocorticoid and calcitonin injection simultaneously than that of glucocorticoid. 3. Tc-99m MDP uptake was revealed significant reduction in medication of glucocorticoid but increase in gi;.:cocorticoid and calcitonin injection simultaneously in later experimental period. 4. There wail, a slight reduction in plasma osteocalcin in medication of glucocorticoid through experimental periods and an increase in its value in case of giving glucocorticoid and calcitonin simultaneously in later experimental period. From these results, we suggest that osteoporosis by immobilization is more pronounced by glucocorticoid hormone and osteoporosis induced by immobilization and glucocorticoid use is prevented by calcitonin administration with increasing osteoblastic activity.

• Journal of Korean Neurosurgical Society
• /
• v.46 no.2
• /
• pp.136-143
• /
• 2009

Objective: Remote cerebellar hemorrhage (RCH) is one of the rare complications occurring after supratentorial surgery, and its pathomechanism is poorly understood. We report 10 cases of RCH from our institution and review 154 cases from a database in order to delineate incidence, common presentation, risk factors, and outcomes of this complication. In addition, the means of prevention are discussed. Methods: We reviewed the medical records of 10 patients who experienced RCH after undergoing supratentorial surgery at our institution between 2001 and 2008. A database search in Medline revealed 154 cases of RCH in the English literature. Characteristic features were analyzed and compared. Results: There were 10 cases of RCH among 3307 supratentorial surgery cases, indicating a 0.3% incidence. All patients had characteristic imaging features of RCH, namely a streaky bleeding pattern in the superior folia of the cerebellum. Seven patients had a history of preoperative hypertension. Four cases were related to cerebral aneurysms, and other four developed after the removal of brain tumors. Cerebrospinal fluid (CSF) drainage apparatuses were installed postoperatively in all cases. Outcomes according to modified Rankin scale (mRS) were good in 7 patients, with 1 fatal case. Conclusion: RCH is a rare complication after supratentorial surgery, and the exact etiology still remains uncertain. Hypertension and perioperative loss of CSF seem positively correlated with RCH, but no single risk factor is totally responsible. Patients with RCH should be closely observed to improve their prognosis.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2373-2376
• /
• 1998

This paper describes the development of the SCADA(Supervisory Control and Data Acquisition) system which can be controlled via the Internet. In this paper, the SCADA system is composed of a number of microprocessor-based RTU(Remote Terminal Unit)s, a MMI(Man Machine Interface) host, a SCADA server, and SCADA clients. There are two protocols used in the system. Each RTU and the MMI host are connected by a RS-485 line and CSMA/CD(Carrier Sense Multiple Access / Collision Detection) protocol is used to communicate with each other. TCP/IP(Transmission Control Protocol/Internet Protocol) is used among the MMI host, the SCADA server, and SCADA clients. The equipments installed in the field are controlled by a number of RTUs. The function of the MMI host is to acquire real-time data from RTUs and control them. The SCADA server supports data transfer between the networked MMI host and the SCADA client on the web-server through TCP/lP. Data transfer is possible regardless of the type of network only if there are TCP/lP Winsock-compatible stack driver. The SCADA client is implemented as the shape of web-page by means of JAVA language. Therefore, it runs on a web-browser such as Netscape and Explorer, and allows a number of users to access this SCADA system.

• Journal of Intelligence and Information Systems
• /
• v.11 no.2
• /
• pp.47-57
• /
• 2005

In this research, the main theme is the system integration of driving simulator and unmanned vehicle. The total system is composed of the mater system and the slave system. The master system has a cockpit system and the driving simulator. The slave system means an unmanned vehicle, which is composed of the actuator system the sensory system and the vision system. The communication system is composed of RS-232C serial communication system which combines the master system with the slave system. To integrate both systems, the signal classification and system characteristics considered DSP(Digital Signal Processing) filter is designed with signal sampling and measurement theory. In addition, to simulate the motion of tele-operated unmanned vehicle on the driving simulator, the classical washout algorithm is applied to this filter, because the unmanned vehicle does not have a limited working space, while the driving simulator has a narrow working space and it is difficult to cover all the motion of the unmanned vehicle. Because the classical washout algorithm has a defect of fixed high pass later, fuzzy logic is applied to reimburse it through an adaptive filter and scale factor for realistic motion generation on the driving simulator.