• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.2
• /
• pp.64-69
• /
• 2003

In this paper, I introduce a simple design method using existing filter design method, such as Parks-McClecllan algorithm, for root-squared type raised cosine filter with equiripple characteristics, Thought some design examples, we show that the proposed filter has much better performance in ripple than the conventional SRCF at the expense of small increasing of ISI. In addition, the proposed filter is compatible with conventional SRCF. Finally, the filter for W-CDMA which uses RRC (Root Raised Cosine) with a=0.22 is designed in 12bit finite precision.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.693-699
• /
• 2013

In this paper, ${\pi}/4$-DQPSK modem according to ITU-R M.1842-1 recommendation Annex1 is investigated and simulated. At first, standardization and technical trend of VHF maritime mobile communication are introduced. The ${\pi}/4$-DQPSK modem defined in the Annex1 should support 28.8Kbps bit transmission rate within 25KHz frequency bandwidth. We describe the system model and simulation process of ${\pi}/4$-DQPSK modem transmitter and receiver design with RRC(Root Raised Cosine) transmitter and receiver filter. Then we suggest various graphical simulation results(time domain signals, constellation, power spectral density according to roll-off factor, eye diagram), and show simulated BER performance of the modem. From the simulation results, it is shown that roll-off factor of RRC filter affects to BER performance according to SNR and the designed simulation model meets the spectrum mask requirement suggested in ITU-R M.1842-1 recommendation.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.261-264
• /
• 2001

In this paper, we introduce a simple design method f9r mot-squared type raised cosine filter with equiripple characteristics. Through some design examples, we show that the proposed filter has much better performance in ripple than the conventional SRCF at the expense of small increasing of ISI. In addition, the proposed Inter is compatible with conventional SRCF. Finally, we designs the filter for W-CDMPI which uses RRC (Root Raised Cosine) with a=0.22, in 12bit finite precision.

• Journal of Advanced Information Technology and Convergence
• /
• v.8 no.2
• /
• pp.147-157
• /
• 2018

In this study, we analyzed an outdoor visible light communication system and implemented it through a simulation. We designed a Reed-Solomon encoder, a variable interleaver structure, and set it to the Institute of Electrical and Electronics Engineers (IEEE) 802.15.7 PHY I specification mode. We also analyzed the performance of an additive white gaussian noise (AWGN) channel environment using a root-raised-cosine (RRC) filter, implemented a MATLAB simulation and analyzed its performance. The results showed a requirement for an additional signal-to-noise ratio (SNR) of approximately 1.5 dB in a 3-ray multipath visible light channel environment than in an AWGN environment.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.2
• /
• pp.13-18
• /
• 2001

In this paper, a four-pole quasi-elliptic function bandpass filter of 1.95GHz center frequency with 60 MHz bandwidth for IMT-2000 using miniaturized square SIR(Stepped Impedance Resonator) is designed and fabricated. The simulation of NUFDTD(Nonuniform Finite Difference Time Domain) is used to design the resonator and to calculate the coupling coefficient of three basic structures. The size reduction of miniaturized square SIR resonator is about more than 50% compare with a square open loop resonator. Bandpass filter using this resonator shows good microwave characteristic with the harmonic suppression of about 19dB. The results of measurements are almost similar to those of simulation.

• Journal of Broadcast Engineering
• /
• v.10 no.4 s.29
• /
• pp.540-547
• /
• 2005

In the DFE(Decision Feedback Equalizer) for ATSC DTV receivers, there are decision errors in the slicer or. the simplified trellis decoder, and these decided false data comes to the feedback filter to make the error propagation phenomenon. The error propagation degrades the equalizer performance by increasing residual errors as well as slowing down the convergence rate. In this paper we propose a dual-feedback equalization structure. There are two feedback filters. One is the decision feedback filter which uses the simplified trellis decoder output data, the other is non-decision feedback filter which uses the equalizer output data. The additional non-decision feedback filter doesn't introduce the error propagation, so it can compensate the error propagation. The proposed structure accelerates the convergence rate as well as reduces output men-square error(MSE). We analyzed the performance enhancement of DTV receiver using dual-feedback equalization structure.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.343-346
• /
• 2003

A new structure to design low pass filters (LPFs) is presented rho proposed structure has the etched shape of Quad-Spiral DGS(Defected Ground Structure) on microstrip transmission lines. By extracting the equivalent circuit elements of unit Quad-Spiral DGS, LPFs are designed easily. The equivalent circuit of Quad-Spiral DGS consists of a step impedance resonator and lumped elements. The proposed LPF provided steep rejection characteristics with 5-poles. Experimental results show excellent agreements with circuit simulation results in wide band and the validity of our circuit modeling for LPF design. The result shows another possibility of Quad Spiral DGS for microwave devices.

• Journal of Communications and Networks
• /
• v.12 no.6
• /
• pp.544-557
• /
• 2010

This paper addresses the problem of controlling the envelope's power peak of single carrier modulated signals, band limited by root-raised cosine (RRC) pulse shaping filters, in order to reduce power amplifier back-off for very small aperture terminals ground stations. Magnitude modulation (MM) is presented as a very efficient solution to the peak-to-average power ratio problem. This paper gives a detailed description of the MM concept and its recent evolutions. It starts by extending the look-up-table (LUT) based approach of the MM concept to M-ary constellations with M ${\leq}$ 16. The constellation and RRC symmetries are explored, allowing considerable reduction on LUT computation complexity and storage requirements. An effective multistage polyphase (MPMM) approach for the MM concept is then proposed. As opposed to traditional LUT-MM solutions, MM coefficients are computed in real-time by a low complexity multirate filter system. The back-off from high-power amplifier saturation is almost eliminated (reduction is greater than 95%) with just a 2-stage MPMM system even for very demanding roll-off cases (e.g., ${\alpha}$ = 0,1). Also, the MPMM is independent of modulation in use, allowing its easy application to constellations with M > 16.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1106-1112
• /
• 2009

The SC-FDMA(single carrier-frequency division multiple access) was recently adopted as the uplink multiple access scheme from 3GPP LTE(3rd Generation Partnership Project Long Tenn Evolution) due to its low PAPR (Peak-to-averaged power ratio). The bandwidth of IFDMA(interleaved FDMA), one of the sub-carrier mapping methods of SC-FDMA, gets narrower as the roll-off factor of RRC(root raised cosine) filter decreases from 1 to 0, whereas its PAPR can increase significantly. In practice, to increase the power efficiency of an amplifier, signals with high PAPR undergo the process of clipping. Clipping of signals may cause regeneration of high-frequency components as well as distortion of signals. The current paper deals with the effect of clipping on the spectrum and BER of IFDMA signals with RRC filters.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.498-500
• /
• 2004

QPSK (Quaternary Phase Shift Keying) will be adopted as the modulation of HRIT (High Rate Information Transmission) which is transmitted to COMS (Communication, Ocean and Meteorological Satellite) through HPA (High Power Amplifier) in ground segment. Due to the nonlinearity of HPA, IMD (Inter-Modulation Distortion) of multi-carrier signals and PAPR (Peak-to-Average Power Ratio) of modulated HRIT must be considered to estimate the output power of HPA. In this paper, we measured the PAPR to various the roll-off factor of RRC (Root Raised Cosine filter) which is filtering the modulated HRIT signal for reducing ISI (Inter-Symbol Interference) and bandwidth. It was found that the minimum PAPR is 2.78dB at 0.5 of roll-off factor for scrambled data. It's 2.78dB of P APR will be in output power selecting in COMS earth station.