• 한국측량학회지
• /
• 제29권2호
• /
• pp.157-164
• /
• 2011

As high-resolution satellite images have enabled large scale topographic mapping and monitoring on global scale with short revisit time, agile sensor orientation, and large swath width, many countries make effort to secure the satellite image information. In Korea, KOMPSAT-2 (KOrea Multi-Purpose SATellite-2) was launched in July 28 2006 with high specification. These satellites have stereo image acquisition capability for 3D mapping and monitoring. To efficiently handle stereo images such as stereo display and monitoring, the accurate epipolar image generation process is prerequisite. However, the process was highly limited due to complexity in epipolar geometry of pushbroom sensor. Recently, the piecewise approach to generate epipolar images using RPC was developed and tested for in-track IKONOS stereo images. In this paper, the piecewise approach was tested for KOMPSAT-2 across-track stereo images to see how accurately KOMPSAT-2 epipolar images can be generated for 3D geospatial applications. In the experiment, two across-track stereo sets from three KOMPSAT-2 images of different dates were tested using RPC as the sensor model. The test results showed that one-pixel level of y-parallax was achieved for manually measured tie points.

• Steel and Composite Structures
• /
• 제45권6호
• /
• pp.819-830
• /
• 2022

This paper presented an experimental study of the bond-slip behavior of reactive powder concrete (RPC)-filled square steel tube. A total of 18 short composite specimens were designed forstatic push-out test, and information on their failure patterns, load-slip behavior and bond strength was presented. The effects of width-to-thickness ratio, height-to-width ratio and the compressive strength of RPC on the bond behavior were discussed. The experimental results show that:(1) the push-out specimens remain intact and no visible local buckling appears on the steel tube, and the interfacial scratches are even more pronounced at the internal steel tube of loading end; (2) the bond load-slip curves with different width-to-thickness ratios can be divided into two types, and the main difference is whether the curves have a drop in load with increasing slip; (3) the bond strength decreases with the increase of the width-to-thickness ratio and height-width ratio, while the influence of RPC strength is not consistent; (4) the slippage has no definite correlation with bond strength and the influence of designed parameters on slippage is not evident. On the basis of the above analysis, the expressions of interface friction stress and mechanical interaction stress are determined by neglecting chemical adhesive force, and the calculation model of bond strength for RPC filled in square steel tube specimens is proposed. The theoretical results agree well with the experimental data.

• 한국정보통신학회논문지
• /
• 제8권2호
• /
• pp.394-406
• /
• 2004

웹 서버에서 제공하는 문서 자원들은 URL/URI 형식으로 표현되고 있지만, 동적인 서버 환경의 변화로 인해 반드시 해당 자원이 서버에 존재하고 있는 것을 보장할 수 없다. 따라서 본 논문에서는 자원에 대한 신뢰성을 보장하고, 동적인 서버 자원 관리 및 클라이언트의 요청을 처리하기 위해 XML-RPC를 이용한 통합문서 관리 시스템을 제안하고 모델링 한다. 제안한 시스템은 동적인 서버 자원을 관리하는 미들웨어 시스템과 클라이언트가 서버에 저장시킨 문서에 대한 갱신 정보를 서버에서 미들웨어 시스템으로 통보하는 서버시스템으로 구성된다. 모델링 결과, 분산된 서버에 있는 동적으로 변하는 문서들을 효과적으로 저장 관리할 수 있었으며, 현재 운영되고 있는 웹 서버에 적용시킬 수 있어 새로운 웹 서버 구축비용을 절감할 수 있고, XML-RPC 프로토콜을 사용하기 때문에 플랫폼 독립적이고 또한 데이터 관리가 효율적임을 알 수 있었다.

• 대한원격탐사학회지
• /
• 제21권2호
• /
• pp.135-143
• /
• 2005

최근 고해상도 영상의 공급에 있어 물리적 센서 모델의 대안으로서 RPC(Rational Polynomial Camera) 모델이 활발히 이용되고 있다. RPC 모델을 통하여 지상 좌표와 영상 좌표간의 ,기하 관계를 단순하고도 정확하게 묘사할 수 있어 과거 물리적 센서 모델을 통하여만 이루어질 수 있었던 정사보정, 스테레오 영상을 이용한 3차원 좌표 추출 등의 처리가 가능하게 되었다 본 연구에서는 RPCs(Rational Polynomial Coefficients)가 주어진 스테레오 영상으로부터 3차원 좌표를 추출할 수 있는 매우 간단한 방법을 제안하고자 하였다. 제안된 방법은 Downhill Simplex 기법을 이용하는 방법으로서, Downhill Simplex 기법은 함수의 최소값을 찾는데 있어 편미분 계산을 수행하지 않는다는 장점을 가지고 있다. 본 연구에서 제안된 Downhill Simplex 기법을 이용한 RPC 스테레오 영상으로부터의 3차원 좌표 추출 기법은 실제 사용이 가능한 소프트웨어 프로그램으로서 구현되었으며, 서울 지역의 스테레오 IKONOS 영상에 시험 적용되었다. 시험 적용 결과, 본 방법은 비교적 빠르게 3차원 좌표를 계산할 수 있는 것으로 평가되며, RPCs가 주어진 스테레오 영상으로부터 3차원 좌표를 추출할 수 있는 실제적 기술로서 사용이 가능할 것으로 기대된다.

• Animal Bioscience
• /
• 제34권6호
• /
• pp.967-974
• /
• 2021

Objective: The objective of this study was to estimate the genetic correlation (rpc) of growth performance between purebred (Duroc and Korean native) and synthetic (WooriHeukDon) pigs using a single-step method. Methods: Phenotypes of 15,902 pigs with genotyped data from 1,792 pigs from a nucleus farm were used for this study. We estimated the rpc of several performance traits between WooriHeukDon and purebred pigs: day of target weight (DAY), backfat thickness (BF), feed conversion rate (FCR), and residual feed intake (RFI). The variances and covariances of the studied traits were estimated by an animal multi-trait model that applied the Bayesian inference. Results: rpc within traits was lower than 0.1 for DAY and BF, but high for FCR and RFI; in particular, rpc for RFI between Duroc and WooriHeukDon pigs was nearly 1. Comparison between different traits revealed that RFI in Duroc pigs was associated with different traits in WooriHeukDon pigs. However, the most of rpc between different traits were estimated with low or with high standard deviation. Conclusion: The results indicated that there were substantial differences in rpc of traits in the synthetic WooriHeukDon pigs, which could be caused by these pigs having a more complex origin than other crossbred pigs. RFI was strongly correlated between Duroc and WooriHeukDon pigs, and these breeds might have similar single nucleotide polymorphism effects that control RFI. RFI is more essential for metabolism than other growth traits and these metabolic characteristics in purebred pigs, such as nutrient utilization, could significantly affect those in synthetic pigs. The findings of this study can be used to elucidate the genetic architecture of crossbred pigs and help develop new breeds with target traits.

• Steel and Composite Structures
• /
• 제31권1호
• /
• pp.13-25
• /
• 2019

Reactive powder concrete (RPC) is a type of ultra-high strength concrete that has a relatively high brittleness. However, its ductility can be improved by confinement, and the use of RPC in composite RPC filled steel tube columns has become an important subject of research in recent years. This paper aims to present an experimental study of axial capacity calculation of RPC filled circular steel tube columns. Twenty short columns under axial compression were tested and information on their failure patterns, deformation performance, confinement mechanism and load capacity were presented. The effects of load conditions, diameter-thickness ratio and compressive strength of RPC on the axial behavior were further discussed. The experimental results show that: (1) specimens display drum-shaped failure or shear failure respectively with different confinement coefficients, and the load capacity of most specimens increases after the peak load; (2) the steel tube only provides lateral confinement in the elastic-plastic stage for fully loaded specimens, while the confinement effect from steel tube initials at the set of loading for partially loaded specimens; (3) confinement increases the load capacity of specimens by 3% to 38%, and this increase is more pronounced as the confinement coefficient becomes larger; (4) the residual capacity-to-ultimate capacity ratio is larger than 0.75 for test specimens, thus identifying the composite columns have good ductility. The working mechanism and force model of the composite columns were analyzed, and based on the twin-shear unified strength theory, calculation methods of axial capacity for columns with two load conditions were established.

• 한국간담췌외과학회지
• /
• 제27권1호
• /
• pp.28-39
• /
• 2023

We aimed to compare resection and survival outcomes of neoadjuvant chemoradiotherapy (CRT) and immediate surgery in patients with resectable pancreatic cancer (RPC) or borderline resectable pancreatic cancer (BRPC). In compliance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement standards, a systematic review of randomized controlled trials (RCTs) was conducted. Random effects modeling was applied to calculate pooled outcome data. Likelihood of type 1 or 2 errors in the meta-analysis model was assessed by trial sequential analysis. A total of 400 patients from four RCTs were included. When RPC and BRPC were analyzed together, neoadjuvant CRT resulted in a higher R0 resection rate (risk ratio [RR]: 1.55, p = 0.004), longer overall survival (mean difference [MD]: 3.75 years, p = 0.009) but lower overall resection rate (RR: 0.83, p = 0.008) compared with immediate surgery. When RPC and BRPC were analyzed separately, neoadjuvant CRT improved R0 resection rate (RR: 3.72, p = 0.004) and overall survival (MD: 6.64, p = 0.004) of patients with BRPC. However, it did not improve R0 resection rate (RR: 1.18, p = 0.13) or overall survival (MD: 0.94, p = 0.57) of patients with RPC. Neoadjuvant CRT might be beneficial for patients with BRPC, but not for patients with RPC. Nevertheless, the best available evidence does not include contemporary chemotherapy regimens. Patients with RPC and those with BRPC should not be combined in the same cohort in future studies.

• 전자공학회논문지T
• /
• 제36T권2호
• /
• pp.42-47
• /
• 1999

본 논문은 시각정보를 공장자동화에 적용하기 위한 모델을 제안하였다. 제안된 모델에서 클라이언트-서버 모델과 RPC(Remote Procedure Calling)를 이용하여 시각정보를 획득하는 시스템, 공장자동화 전체를 총괄하는 메인서버, 그리고 시각정보만을 처리하는 처리서버로 분산처리 한다. 그 유효성을 지폐인식시스템으로 구현하였다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2003년도 추계학술발표논문집 (중)
• /
• pp.669-672
• /
• 2003

인터넷상에서 데이터를 전달하기 위해 XML 기술을 활용하여 분산 환경을 어떻게 더욱 발전된 모습으로 지원해 나갈 수 있을 것인지를 두고 다양한 시도가 이루어지고 있다. 분산 환경에서 XML기술을 활용할 수 있는 분야는 데이터를 표현하여 모든 곳에서 통합화, 표준화하여 모든 사용자들이 접근 가능하도록 하는 기반구조이다. 최근 전자상거래 상(B2B)의 직접적인 거래론 위해서 변환과 문서 전달기능을 수행하는 메시징 시스템이 필요하다. 이러한 메시징 시스템을 XML과 결합하여 사용한다면 신뢰할 수 있고 확장 가능한 구조를 만들 수 있을 것이다. 따라서 본 논문에서는 JMS를 사용하여 B2B상에서 메시지 교환을 자유롭게 할 수 있는 RPC 메시징 모델을 설계한다. 본 메시징 모델을 전자상거래 시스템에 적용하면 B2B 메시지 전송이 용이하게 될 것이다.

• Applied Biological Chemistry
• /
• 제48권1호
• /
• pp.82-88
• /
• 2005

새로운 2-alkoxyphenyl-3-phenylthioisoindoline-1-one 유도체(A & B)들의 치환기 변화에 따른 저항성(RPC; 95CC7303)과 감수성(SPC; 95CC7105) 고추역병 균주(Phyto pthora capsici)들의 살균활성에 대한 3차원적인 정량적 구조-활성관계(3D-QSAR)를 비교 분자장 분석(CoMFA) 방법으로 연구하였다. 정렬방법에 따라 field fit(FF) 보다는 atom based fit(AF) 정렬시에 양호한(AF>FF) 모델, A3 및 A7을 얻을 수 있었다. AF 정렬시, 부가적 설명인자로서 HOMO 및 LUMO 분자 궤도장이 추가된 H-bond와 standard field에서 유도된 균주별 두 모델의 cross-validated $r^2\;_{cv.}$값$(q^2=0.625{\sim}0.834)$과 non cross-validated 값$(r^2_{ncv.}=0.894{\sim}0.915)$에 근거하여 SPC 균주의 살균활성에 대한 모델, A7이 RPC 균주의 살균활성에 대한 모델, A3보다 양호한 예측성(q2)을 나타내었다. 두 균주에 대한 살균활성은 분자의 입체장$(66.8{\sim}82.8%)$, 정전기장$(10.3{\sim}4.6%)$ 그리고 분자 궤도장(SPC: HOMO, 12.6% 및 RPC: LUMO, 22.9%)이 영향을 미치는 중요한 요소이었다. 두 균주에 대한 선택성은 N-phenyl 고리상 ortho, meta-위치의 양하전과 S-phenyl 고리상 치환기의 친수성의 크기에 의존적이었다.