• Tunnel and Underground Space
• /
• v.4 no.3
• /
• pp.274-286
• /
• 1994

Direct shear tests were on ducted in a laboratory setting in order to investigate the shear strength and deformation behavior of rock joints. Also, the characteristics of acoustic emissions (AE) during shearing of rock joints were studied. The artificial rock joints were created by splitting the intact blocks of Hwangdeung granites and Iksan marbles. Joint roughness profiles were measured by a profile gage and then digitized by Image analyzer. Roughness profile indices(Rp) of the joints were calculated with these digitized data. Peak shear strength, residual shear strength, shear stiffness and maximum acoustic emission(AE) rate were investigated with joint roughness. The peak shear strenght, the residual shear strength and the shear stiffness were increased as roughness popfile index or normal stress increased in the shear tests of granites. In the tests of marble samples, the shear deformation characteristics were not directly affected by joint roughness. As the result of two directional shear tests, the shear characteristics were varied with shear direction. AE count rates were measured during the shear deformation and the AE signals in several stages of the deformation were analyzed in a frequency domain. The AE rate peaks coincided with the stress drops during the shear deformation of joint. The dominant frequencies of the AE signals were in the vicinity of 100 kHz fo rgranite sample and 900 kHz for marble samples. The distribution of amplitude was dispersed with increasing normal stress.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.3
• /
• pp.64-70
• /
• 2007

Of all the rapid tooling (RT) methods currently available, thick-layer laminated tooling is the most suitable for large-scale, low-cost dies and molds. Currently, the determination of a lamina's contour or profile and the associated slicing algorithms are based on existing rapid prototyping (RP) data manipulation technology. This paper presents a new adaptive slicing algorithm developed exclusively for profiled edge laminae (PEL) tooling PEL tooling is a thick-layer RT technique that involves the assembly of an array of laminae, whose top edges are simultaneously profiled and beveled using a line-of-sight cutting method based on a CAD model of the intended tool surface. The cutting profiles are based on the intersection curve obtained directly from the CAD model to ensure geometrical accuracy. The slicing algorithm determines the lamina thicknesses that minimize the dimensional error using a new tool shape error index. At the same time, the algorithm considers the available lamination thicknesses and desired lamina interface locations. We demonstrate the new slicing algorithm by developing a simple industrial PEL tool based on a CAD part shape.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1997.11a
• /
• pp.224-227
• /
• 1997

The International Affective Picture System (IAPS) developed by Lang and colleagues[1] is a world-widely adopted tool in studices relating a variety of physiological indices to subjective emotions induced by the presentation of standardized pictures of which subjective ratings are well established in the three dimensions of pleasure, arousal and dominance. In the present stuey we investigated whether distinctive EEG characteristics for six discrete emotions can be discernible using 12 IAPS pictures that scored highest subjective ratings for one of the 6 categorical emotions, i. e., happiness, sadness, fear, anger, disgust, and surprise (Two slides for each emotion). These pictures as visual stimuli were randomly given to 38 right-handed college students (20-26 years old) with 30 sec of exposure time and 30sec of inter-stimulus interval for each picture while EEG signals were recorded from F3, F4, O1, and O2 referenced to linked ears. The FFT technoque were used to analyze the acquired EEG data. There were significant differences in RP value changes of EEG bands, most prominent in theta, between positive positive and negative emotions, and partial also among negative emotions. This result is in agreement with previous studies[2, 3]. However, it requires further studied to decided whether IAPS could be a useful tool for catigorical approaches to emotion in addition to its traditional uwe, namely dimensional to emotion.

• Journal of Life Science
• /
• v.11 no.2
• /
• pp.83-86
• /
• 2001

The long terminal repeat (LTR) elements of human endogenous retrovirus (HERV) have been found to be coexpressed with genes located nearby. It has been suggested that the LTR elements have contributed to the genetic variation of human genome connected to various diseases. Recently, HERV-W family was identified in the cerebrospinal fluids and brains of individuals with schizophrenia. Using genomic DNAs derived from schizophrenia, we performed PCR amplification and identified six HERV-W LTR elements. Those LTR elements showed a high degree of sequence similarity (87.7-99.5%) with HERV-W LTR (AF072500). Sequence analysis of the HERV-W LTR elements revealed that clone W-sch1 showed identical sequence with the AC003014 (PAC clone RP1-290B4) derived from human Xq23. Clone W-sch2 was closely related to the AC0072442 derived from human Y chromosome by phylogenetic analysis. Our data suggest that new HERV-W LTR elements in schizophrenia may be very useful for further studies to understand neuropsychiatric diseases.

• Journal of the Korean housing association
• /
• v.14 no.6
• /
• pp.95-104
• /
• 2003

The purpose of this study was to find out the actual condition of University student's use of colors and its favored colors in their rooms. This is to proffer basic data for the color planning of University student's rooms in the future. Questionnaires research method was conducted and 343 sample were selected. The analysis used spss program. The result was as follows； 1) At present, Y or Light tone of YR are mostly used for the floors of University student's rooms, white or Very pale tone of Y were used for walls and ceilings, YR or various tones were used for opening parts. 2) The degree of satisfaction of the color environment was 2.87 in average - ″a little dissatisfied″, more than half of the samples needed to change the color environment. 3) The favored color image of the students was regarded as ″warm, neat, tender, bright and light″ 4) In case of the favored colors of the essential parts, floors were Y or Pale tone of YR, walls were Very pale tone of Y, PB, B, RP. And Very pale tones of B, PB, Y, White for ceilings, Pale tones of YR, White, Dark Blue for opening parts were favored.

• Archives of Pharmacal Research
• /
• v.28 no.10
• /
• pp.1147-1151
• /
• 2005

A new naturally occurring sterol, compound 5, and six known stigmasterols were isolated from fruits of Ailanthus altissima Swingle by repeated column chromatography and RP-HPLC. Their structures were identified as, 5${\alpha}$-stigmastane-3,6-dione (1), 3${\beta}$-hydroxystigmast-5-en-7-one (2), stigmast-5-ene-3${\beta}$, 7${\alpha}$-diol (3), 6${\alpha}$-hydroxystigmast-4-en-3-one (4), 5${\alpha}$-stigmastane-3${\beta}$, 6${\beta}$-diol (5), stigmast-4-ene-3${\beta}$, 6${\alpha}$-diol (6), stigmast-5-ene-3${\beta}$, 7${\alpha}$, 20$\xi$-triol (7) by spectral analysis and comparison with the published data. These compounds have not been reported from genus Ailanthus, whereas compound 7 was identified by NMR for the first time. In addition, the $95\%$ ethanol extract and compounds from the fruits of Ailanthus altissima SWINGLE were assayed for in vitro antimicrobial activity. The extract was potent active against the assayed bacteria while compounds 3 and 7 exhibited moderate activity.

• YAKHAK HOEJI
• /
• v.52 no.2
• /
• pp.111-116
• /
• 2008

Diethylstilbestrol (DESB) is a synthetic estrogen not only that routinely prescribed, but also that known to be a teratogen. In this study, we found a novel pharmacological feature that DESB is able to positively modulate CD29 $({\beta}1-integrin)$ function. Thus, DESB up-regulated homotypic cell-cell adhesion of monocytic U937 cells mediated by CD29. However, DESB did not increase the surface level of CD29 and its binding activity to ligand (fibronectin), according to flow cytometric analysis and cell-fibronectin adhesion assay. Instead, the DESB-mediated up-regulation of cell-cell adhesion was blocked by several signaling enzyme inhibitors. Treatment of U0126 [an extracellular signal-regulated kinase (ERK) inhibitor], SB20358 (a p38 inhibitor) or Rp-8-pCPT-cGMP (a protein kinase G inhibitor) clearly inhibited DESB-mediated up-regulation of cell-cell adhesion induced by CD29. However, estrogen receptor antagonist ICI 182,780 failed to abrogate DESB effect. Therefore, our data suggest that DESB may up-regulate CD29-mediated cell-cell adhesion via modulating intracellular signaling enzymes such as ERK, PKG, and p38, independent of estrogen receptor function.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.2
• /
• pp.115-121
• /
• 2003

A new Layered Manufacturing(LM) system, named PaperMill, is developed applying micro milling technology. A micro endmill(127 11m in diameter) is introduced as the cutter of build material. The selected build material for this system is an adhesive-coated paper roll which provides advantages such as good bonding between layers, machinability, and low material cost. A 3-axis CNC controller and three step-motors are used for the movement of X-Y-Z table of the system. For simplicity of the control of mechanism, the control system for feeding the paper roll is uncoupled from CNC controller. Two code converters are developed for the toolpath generation of the new LM system. The NC converter generates a set of NC codes for PaperMill using commercial CAM software while the SML converter generates an NC code from Quickslice's SML format. The NC codes generated from the converters consist of a series of profile data and trigger code for paper feeding. Two sample gears were fabricated to prove the concept of the system, which shown that the dimensional errors of the fabricated gears is under 3.4 percent.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.4
• /
• pp.325-333
• /
• 2000

This paper deals with real time building of route and vertical alignment information system for the efficient and scientific management using GSIS. First, we redesigned route and vertical alignment for obtained basic data using road projector(road design main software). Using by these acquired result, we made a database on road plan and vertical alignment drawing as a basic information being used to construction of road complex information system. The main objectives in this study are the rational maintenance road planing for drawings, its database and the systematization of route information management through the fast updating, mending, supplement. Result of this study enables us to manage route information.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.161-166
• /
• 2002

As offshore oil fields move towards the deep ocean, the oil production systems such as FPSO are being built these days. Generally, the FPSO is moored by turret mooring lines to keep the position of FPSO. Thus nonlinear motion analysis of moored FPSO must be carried out in the initial design stage because sea environments affect motion of it. In this paper the mathematical model is based on the slow motion maneuvering equations in the horizontal plane considering wave, current and wind forces. The direct integration method is employed to estimate wave loads. The current forces are calculated by using mathematical model of MMG. The turret mooring forces are quasi-statically evaluated by using the catenary equation. The coefficients of a model for wind forces are calculated from Isherwood's experimental data and the variation of wind speed is estimated by wind spectrum according to the guidelines of API-RP2A. The nonlinear motions of FPSO are simulated under external forces due to wave, current, wind including mooring forces in time domain.