• Proceedings of the Korea Contents Association Conference
• /
• 2004.11a
• /
• pp.344-347
• /
• 2004

Critical cryptography applications require the production of an unpredictable and unbiased stream of binary data derived from a fundamental noise mechanism. In this paper, we proposed a RNG with Gaussian noise using filter algorithm. The proposed scheme is designed to reduce the statistical property of the biased bit stream in the output of a RNG. Experimental show that we analysis the loss rate according to window size and propose optimum window size.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.162-166
• /
• 2007

In the present study, the pressure coefficient of a cubic building model is numerically simulated. Three turbulence models of standard ${\kappa}-{\varepsilon}$, RNG ${\kappa}-{\varepsilon}$ and LES are adopted and the results are compared with the available experimental data. From the results, it has been found that RNG ${\kappa}-{\varepsilon}$ turbulence model and LES turbulence model were shown to predict fairly well the experimental pressure coefficient. In contrast, the results of the standard ${\kappa}-{\varepsilon}$ turbulence model showed large discrepancies in pressure coefficient on the side and top surfaces of the cubic building, which limits the applicability of the standard ${\kappa}-{\varepsilon}$ turbulence model on wind engineering.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.3
• /
• pp.223-233
• /
• 1999

The wind-flow characteristics over a two-dimensional triangular prism with a porous windbreak are numerically investigated. The geometry is a simplified model of large outdoor stack with a frontal wall-type windbreak which is used to prevent particle dispersion by reducing wind speed over stak surface. In the present numerical model, the RNG k-$\varepsilon$ model, the orthogonal grid system and the QUICK scheme are employed for the successful simulation of separated flow. The predicted results are compared and validated with the associated wind-tunnel experiments. In addition, the trajectories of dispersed particles and their sedimentation characteristics are quantitatively investingated using a Lagrangian turbulent-dispersion model.

• Journal of Power System Engineering
• /
• v.5 no.1
• /
• pp.50-56
• /
• 2001

Jet pumps are used in a great number of engineering applications. In the present study, jet shapes, mixing chamber shapes, and numerical methods for predicting the performance of an annular-type jet pump are investigated to determine the optimal turbulence model. The flow fields are simulated by solving the momentum and the continuity equations with the standard ${\kappa}-{\epsilon}$ and the RNG ${\kappa}-{\epsilon}$ turbulence models at different Reynolds numbers. After that, they are compared with the corresponding experimental data to determine the optimal model. Next, various calculations are conducted to find an optimal shape using the selected turbulence model. The study shows us that the RNG ${\kappa}-{\epsilon}$ model predicts the performance more exactly, and also shows that the most effective performance can be achieved with $12^{\circ}$ reducing angle and 130mm throat length.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.8 no.2
• /
• pp.132-139
• /
• 2008

This paper proposes a scatternet topology formation, self-healing, and self-routing path optimization algorithm based on Relative Neighborhood Graph. The performance of the algorithm using ns-2 and extensible Bluetooth simulator called blueware shows that even though RNG-FHR does not have superior performance, it is simpler and easier to implement in deploying the Ad-Hoc network in the distributed dynamic environments due to the exchange of fewer messages and the only dependency on local information. We realize that our proposed algorithm is more practicable in a reasonable size network than in a large scale.

• The KIPS Transactions:PartC
• /
• v.8C no.3
• /
• pp.367-372
• /
• 2001

지도제작, 해양생태감시, 기상관측, 및 우주환경감시 등의 분야에 이용되는 저궤도 위성을 관제(위성추적, 원격측정 및 명령)하기 위해 본 논문에서는 최적의 PM 변조지수를 결정하는 방법을 기술하고 수신 데이터의 성능을 평가한다. 이 저궤도 위성인 아리랑 위성은 한국에서는 첫 번째 저궤도 위성이며 1999년 12월 발사되어 현재 임무를 충실히 수행하고 있다. 아리랑 위성 관제시스템의 파라미터에 의해 위성링크를 설계하면, PB 원격측정 신호의 최적 변조지수는 Eb/No마진과 PFD마진의 교차점이 되며 1.92라디안으로 결정된다. 또한 위성의 통과시간에 따라 예측되는 BER은 RT모드에서 최고의 성능을 나타애고, RT+RNG모드에서 최악의 성능을 나타내기 때문에 데이터 전송순서를 위성의 통과시간에 따른 BER 성능 순서인 RT, PB, RT+RNG모드의 순서로 결정함으로써 수신성능을 높일 수 있다.

• 한국가시화정보학회:학술대회논문집
• /
• 2006.12a
• /
• pp.145-148
• /
• 2006

In order to design a micro-thruster which controls the altitude of a space vehicle for a very long lifetime, the flow field should be analyzed considering the nozzle geometry and the difference between stagnation and environmental pressures and so on. This paper describes the axisymmetric non-reacted computational results which were carried out to understand the basic flow phenomena according to the high nozzle pressure ratio. The area ratio is about 56 and the diameter of a nozzle exit is about 0.46 inch. The Mach cell and waves are predicted well.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.729-731
• /
• 2008

Three-dimensional unsteady simulation using RNG $\kappa-\varepsilon$ turbulence model is used in full flow passage of model Kaplan turbine. Then the pressure pulsation is obtained. Monitoring data of pressure pulsation in the turbine is obtained through experiment and is compared with the numerical simulation. And a good coherence is shown between the simulation and the experiment. Then the regularity of the pressure pulsation s distribution and transmission in the turbine is discussed in detail.

• Wind and Structures
• /
• v.5 no.2_3_4
• /
• pp.177-192
• /
• 2002

Computation solutions for the flow around a cube, which were generated as part of the Computational Wind Engineering 2000 Conference Competition, are compared with full-scale measurements. The three solutions shown all use the RANS approach to predict mean flow fields. The major differences appear to be related to the use of the standard $k-{\varepsilon}$, the MMK $k-{\varepsilon}$ and the RNG $k-{\varepsilon}$ turbulence models. The inlet conditions chosen by the three modellers illustrate one of the dilemmas faced in computational wind engineering. While all modeller matched the inlet velocity profile to the full-scale profile, only one of the modellers chose to match the full-scale turbulence data. This approach led to a boundary layer that was not in equilibrium. The approach taken by the other modeller was to specify lower inlet turbulent kinetic energy level, which are more consistent with the turbulence models chosen and lead to a homogeneous boundary layer. For the $0^{\circ}$ case, wind normal to one face of the cube, it is shown that the RNG solution is closest to the full-scale data. This result appears to be associated with the RNG solution showing the correct flow separation and reattachment on the roof. The other solutions show either excessive separation (MMK) or no separation at all (K-E). For the $45^{\circ}$ case the three solutions are fairly similar. None of them correctly predicting the high suctions along the windward edges of the roof. In general the velocity components are more accurately predicted than the pressures. However in all cases the turbulence levels are poorly matched, with all of the solutions failing to match the high turbulence levels measured around the edges of separated flows. Although all of the computational solutions have deficiencies, the variability of results is shown to be similar to that which has been obtained with a similar comparative wind tunnel study. This suggests that the computational solutions are only slightly less reliable than the wind tunnel.

• Coupled systems mechanics
• /
• v.8 no.4
• /
• pp.339-350
• /
• 2019

A numerical simulation of the incompressible multiphase hydraulic jump flow was performed to compare the interface prediction through the use of the three RANS turbulence models: $k-{\varepsilon}$, $RNGk-{\varepsilon}$ and SST $k-{\omega}$. A three dimensional no submerged hydraulic jump and a two dimensional submerged hydraulic jump were modeled. Both the geometry and the mesh were created using the open source Gmsh code. The project's geometry consists of a rectangular channel with length and height differences between the two dimensional and three dimensional simulations. Uniform hexahedral cells were used for the mesh. Three refining meshes were constructed to allow to verify simulation convergence. The Volume of Fluid (abbr. VOF) method was used for treatment of the air-water surface. The turbulence models were evaluated in three distinct set up configurations to provide a greater accuracy in the flow representation. In the two-dimensional analysis of a submerged hydraulic jump simulation, the turbulence model RNG RNG $k-{\varepsilon}$ provided a better interface adjust with the experimental results than the model $k-{\varepsilon}$ and SST $k-{\omega}$. In the three-dimensional simulation of a no-submerged hydraulic jump the k-# showed better results than the SST $k-{\omega}$ and RNG $k-{\varepsilon}$ capturing the height and length of the ledge with a better fit with the experimental results.