• 한국전산유체공학회:학술대회논문집
• /
• 1996.05a
• /
• pp.58-67
• /
• 1996

This paper describes some computational results of various energy and environmental systems using Patankar's SIMPLE method. The specific topics handled in this study are jet bubbling reactor for flue gas desulfurization, cyclone-type afterburner for incineration, 200m tall stack for 500 MW electric power generation, double skin and heat storage systems of building energy saving for the utilization of solar heating, finally turbulent combustion systems with liquid droplet or pulverized coal particle. A control-volume based finite-difference method with the power-law scheme is employed for discretization. The pressure-velocity coupling is resolved by the use of the revised version of SIMPLE, that is, SIMPLEC. Reynolds stresses are closed using the standard $k-{\varepsilon}$ and RNG $k-{\varepsilon}$ models. Two-phase turbulent combustion of liquid drop or pulverized coal particle is modeled using locally-homogeneous, gas-phase, eddy breakup model. However simple approximate models are incorporated for the modeling of the second phase slip and retardation of ignition without consideration of any detailed particle behavior. Some important results are presented and discussed in a brief note. Especially, in order to make uniform exit flow for the jet bubbling reactor, a well-designed structure of distributor is needed. Further, the aspect ratio in the double skin system appears to be one of important factors to give rise to the visible change of the induced air flow rate. The computational tool employed in this study, in general, appears as a viable method for the design of various engineering system of interest.

• Korean Journal of Optics and Photonics
• /
• v.22 no.2
• /
• pp.83-89
• /
• 2011

In order to improve the calculation speed of an integrating-sphere simulator based on a ray-tracing method, parallel processing with OpenMP directive was implemented into the simulator and the randomness of Monte Carlo method was guaranteed by utilizing a parallel random number generator. It was confirmed that simulation results obtained with more than $10^7$ rays showed good agreement with theoretical results within the error range of 0.5%, and that the calculation speed improved as the number of threads increased. Finally, the spatial response distribution functions of a real integrating sphere were simulated and compared with previous results.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.2
• /
• pp.112-121
• /
• 2003

Information Protection and cryptography technology is developed with if but solved problem of real time processing and secret maintain. Therefore this paper is Proposed new PRN-SEED(Pseudo-Random Number-SEED) for the increasing secret rate and processing rate perform performance analysis with existed other cryptography algorithms. Proposed new PRN-SEED crypto-algorithm increase in the processing rate than existed algorithms use bit and byte mixed operation with RNG(Random Number Generator). PRN-SEED that performs simultaneous operations have higher 1.03 in the processing rate and 2 in the cryptosystem performance than existed cryptosystems. Implementation for PRN-SEED use Synopsys Design Analyser Ver. 1999.10, samsung KG75 library and Synopsys VHDL Debegger. As a simulation result, symmetric cryptosystem DES operate 416Mbps at the 40MHz and Rijndael operate 612Mbps at the 50MHz. PRN-SEED cryptosystem have gate counting 10K and operate 430Mbps at the 40MHz and 630Mbps at the 50MHz.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.73-78
• /
• 2018

In this paper, we consider a system where multiple sources are encrypted in separated nodes and sent through their respective public communication channels into a joint sink node. We are interested at the problem on protecting the security of an already existing system such above, which is found out to have correlated encryption keys. In particular, we focus on finding a solution without introducing additional secret keys and with minimal modification to minimize the cost and the risk of bringing down an already running system. We propose a solution under a security model where an eavesdropper obtains all ciphertexts, i.e., encrypted sources, by accessing available public communication channels. Our main technique is to use encoders of universal function to encode the ciphertexts before sending them to public communication channels.

• Journal of Environmental Health Sciences
• /
• v.18 no.1
• /
• pp.22-33
• /
• 1992

In Iri industrial area, Heavy metals in ait of the factories, 10 metal and 8 non-metal factories, were examined for ten months(from Feb. to Nov, 1991). The methals in blood, urin and hair of 232 employees who have worked in the factories were also examined at the same time The results are summarized as follows 1. Heavy metals Pb, Cd and Mn in the metal factories were 0.031mg/m$^{3}$, 0.0065mg/m$^{3}$, and 0. 035mg/m$^{3}$ respectively, but 0.017mg/m$^{3}$, 0.021mg/m$^{3}$ and 0.014mg/m$^{3}$ in non-metal factories. 2. Heavy metals such as Pb, Cd and Mn in blood from employees in the metal factories were measured : 22.36$\mu$g/dl, 0.27$\mu$g/dl and 1.26$\mu$g/dl respectively, The values in the non-metal factories were 19.84$\mu$g/dl, 0.21$\mu$g/dl and 1.24$\mu$g/dl. 3. Heavy metals such as Pb, Cd and Mn in urine from employees in the metal factories were measured 32.94$\mu$g/l, 0.16$\mu$g/dl, and 1.60$\mu$g/dl respectively, whereas the values in the non-metal factories were 28.79$\mu$g/l, 0.13$\mu$g/dl and 1.35$\mu$g/l. 4. Heavy metals such as Pb, Cd and Mn in hair from employees in the metal factories were measured 8.92mg/kg, 0.33mg/kg and 3.71mg/kg respectively, but 8.14mg/kg, 0.31mg/kg and 3.26 rng/kg in the non-metal factories.

• Wind and Structures
• /
• v.4 no.3
• /
• pp.177-196
• /
• 2001

At present the most popular turbulence models used for engineering solutions to flow problems are the $k-{\varepsilon}$ and Reynolds stress models. The shortcoming of these models based on the isotropic eddy viscosity concept and Reynolds averaging in flow fields of the type found in the field of Wind Engineering are well documented. In view of these shortcomings this paper presents the implementation of a non-linear model and its evaluation for flow around a building. Tests were undertaken using the classical bluff body shape, a surface mounted cube, with orientations both normal and skewed at $45^{\circ}$ to the incident wind. Full-scale investigations have been undertaken at the Silsoe Research Institute with a 6 m surface mounted cube and a fetch of roughness height equal to 0.01 m. All tests were originally undertaken for a number of turbulence models including the standard, RNG and MMK $k-{\varepsilon}$ models and the differential stress model. The sensitivity of the CFD results to a number of solver parameters was tested. The accuracy of the turbulence model used was deduced by comparison to the full-scale predicted roof and wake recirculation zone lengths. Mean values of the predicted pressure coefficients were used to further validate the turbulence models. Preliminary comparisons have also been made with available published experimental and large eddy simulation data. Initial investigations suggested that a suitable turbulence model should be able to model the anisotropy of turbulent flow such as the Reynolds stress model whilst maintaining the ease of use and computational stability of the two equations models. Therefore development work concentrated on non-linear quadratic and cubic expansions of the Boussinesq eddy viscosity assumption. Comparisons of these with models based on an isotropic assumption are presented along with comparisons with measured data.

• Journal of Pharmacopuncture
• /
• v.3 no.2
• /
• pp.153-168
• /
• 2000

This study was designed to study on major components of various Bee Venom(Bee Venom by electrical stimulation in Korea; K-BV I, Bee Venom by Microwave stimulation in Korea; K -BV II, 0.5rng/ml, Fu Yu Pharmaceutical Factory, China; C-BV, 1mg /ml, Monmouth Pain Institute, Inc., U.S.A.; A-BV) using Electrophoresis. The results were summarized as follows: 1. In 1:4000 Bee Venom solution rate, the band was not displayed distinctly usmg Electrophoresis. But in 1: 1000, the band showed clearly. 2. The results of Electrophoresis at solution rate 1:1000, K-BV I and K-BVII showed similar band. 3. The molecular weight of Phospholipase $A_2$ was known as 19,000 but its band was seen at 17,000 in Electrophoresis. 4. Protein concentration of Bee Venom by Lowry method was different at solution rate 1:4000 ; C-BV was $250{wmu}g/ml,\;K-BV\;I\;was\;190{wmu}g/ml,\;K-BVII\;was\;160{wmu}/ml\;and\;C-BV\;was\;45{wmu}/ml5$. Electrophoresis method was unuseful for analysis of Bee Venom when solution rate is above 1:4000 but Protein concentration of Bee Venom by Lowry method was possible. These data from the study can be applied to establish the standard measurement of Bee Venom and prevent pure bee venom from mixing of another components. I think it is desirable to study more about safety of Bee Venom as time goes by.

• Resources Recycling
• /
• v.10 no.4
• /
• pp.18-23
• /
• 2001

Air pollutants, phenol was generated in case of thermal regeneration of used activated carbon loaded with phenol and because of this problem, removal process of phenol were studied. Electrolytic oxidation of samples, used S.company granular activated carbon (WS-GAC), used C.company granular activated carbon (WC-GAC) and used L.company granular activated carbon (WL-GAC) loaded with phenol carried out by potentiostatic method in this study. In case of experiment was to come into operation in condition of samples containing 100 mg/g phenol, supporting electrolyte was 1.0% sodium chloride solution, Ti-Ir (10$\times$10$\textrm{cm}^2$) electrode and electrode distance was 2 cm, current density was $1.25 A/dm^2$, Obtained from the results of electrolytic oxidation experiments were not detected residual phenol. And then we knew about reaction time of electrolytic oxidation, current density, concentration of supporting electrolyte and electrode and electrode distance were 60 minutes, 1.25 A/dm$^2$, 1.0%, 2 cm.

• Korean Journal of Microbiology
• /
• v.36 no.3
• /
• pp.209-215
• /
• 2000

The purpose of U7is work was to iilvestigate the degradation of s-h~azine hel-hicidcs, ahilzine and simazine by TNT-degrader under several relevaut physicochemical environ~nental parameters. TNT-degrader showed effective degradability of atrazine and snnazine as well. Both atrazme (GO 1i1~11) and simazine ( 4 5 rng//) were completely degraded within 30 hrs and 4 days of incubation, respectively. As d ~ e concentrations of atrazine and sunazine increased in the media, the degradation ofthose compounds were delayed. Additional caubans were essential to degrade atrazine and simazule, and no degradation was achieved in the absence of additional carbons. The effect of supplemented nitrogens on the degradation of atrazine and sunazine was evalualed. Addition of a suppleinented nitrogen in he growth medium containing ah-azine or siinazine showed partial degr-adation olihose herbicides duriug the incubation period. However, complete degradation of atrazine and simazu~e was examined ul the absence or any supplemented nitrogens. Addltion of yeast extract in this study was inhibilory to atrazine aud siinazine degradations, respectively. TNT-degrader was a small Gram-negative cocco-bacillus. Physiological analysis using BIOLOG sysleln revealed that this strain was Ste~~ol~~opl~orno~~ns rrialtophilia.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.775-780
• /
• 2008

This paper reports on the internal flow of a centrifugal mini pump working at the low flow rate operating conditions. The RNG $\kappa-\varepsilon$ turbulence model was employed to simulate the three-dimensional turbulent flow in the pump. To examine and certify the simulation results, a transparent acrylic centrifugal mini pump model which is suitable for PIV measurement has been developed. The tongue region and the passages region between blades were investigated using PIV. In order to eliminate the effect of refraction on the area closed to the wall and increase the measurement accuracy, the fluorescent particles were scatted into the working fluid with the tracing particles. It is found from the calculation and PIV measurement results that there is a large area of recirculation flow near the tongue at low flow rate operating conditions. The computationally predicted water head using the $\kappa-\varepsilon$ turbulence model at low flow rate operating conditions are in very good agreement with the experimentally measured water head and the mean velocity distributions at investigation area obtained by PIV and calculation showed a satisfactory agreement as well. Meanwhile, the results of PIV measurements show that the flow status in one passage is different to another. And for capturing the internal flow detail information, the $\kappa-\varepsilon$ turbulence model is not very suitable.