• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1287-1292
• /
• 2007

Recently, the frequency of unexpecting heavy rains has been increased due to abnormal climate and extreme rainfall. There was a limit to analyze 1D or 2D stream flow that was applied simple momentum equation and fixed energy conservation. Therefore, hydrodynamics flow analysis in rivers has been needed 3D numerical analysis for correct stream flow interpretation. In this study, CFD model on FLOW-3D was applied to stream flow analysis, which solves three dimenson RANS(Reynolds Averaged Navier-Stokes Equation) control equation to find out physical behavior and the effect of hydraulic structures. Numerical simulation accomplished those results was compared by using turbulence models such as ${\kappa}-{\varepsilon}$, RNG ${\kappa}-{\varepsilon}$ and LES. Those numerical analysis results have been illustrated by the turbulence energy effects, velocity of flow distributions, water level pressure distributions and eddy flows around the piers at Jangwall bridge in urbarn stream.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.2
• /
• pp.126-133
• /
• 2003

The aerodynamic characteristics of automobiles have received substantial interest recently. Detailed knowledge of the vehicle aerodynamics is essential to improve fuel efficiency and enhance stability at high-speed cruising. In this study, a numerical simulation has been carried out for three-dimensional turbulent flows around a commercial bus body. Also, the effect of rear-spoiler attached at rear end of bus body was investigated. The Wavier-Stokes equation is solved with SIMPLE method in general curvilinear coordinates system. RNG $k-\varepsilon$ turbulence model with the MARS scheme was used for the evaluating aerodynamic forces, velocity and pressure distribution. The results showed details of the three-dimensional wake flow in the immediate rear of bus body and the effect of rear-spoiler on the wake structure. A maximum of 14% reduction in drag coefficient was achieved for a model with a rear-spoiler.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.4
• /
• pp.55-61
• /
• 2003

Heat transfer characteristics for an air jet vertically impinging on a flat plate with a set of hybrid rods was investigated numerically using the RNG k-$\varepsilon$turbulent model. A commercial finite-volume code FLUENT is used. The rods had cross sections of half circular and rectangular shapes. The heating surface was heated with a constant heat flux value of $1020W/m^2$. Parameters investigated were the jet Reynolds number, nozzle -to-plate spacing, the rod pitch and rod-to-plate clearance. The local and average Nusselt number were found to be dependent on the rod pitch and the clearance because installing rods disturbed the flow. Higher convective heat transfer rate occurred in the whole plate as well as in the wall jet region.

• Journal of Environmental Health Sciences
• /
• v.18 no.1
• /
• pp.34-38
• /
• 1992

This study was carried out to investigate silicate-silicious in spring water and ground water. Samples were collected from 23 Stations of spring water and 2 Stations of ground water from August 1985 to July 1990 in Pusan area. Range and mean value of silicate-silicious of spring water and ground water were lower 2.12~22.70mg/l, 8.78mg/l, 13.90~19.05mg/l, 16.23mg/l than the criterion for drinking water as 50rng/l. The concentration of silicate-silicious had a great influence on precipitation, therefore it in summer was higher than in winter. The estimated regression line between chloride ion(x) and silicate-silicious(y) of the sampled water was y=19.366-0.604x(r=-0.7111).

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2296-2298
• /
• 1998

In this paper, an on-chip learning pulse-mode digital neural network with a massively parallel yet compact and flexible network architecture is suggested. Algebraic neural operations are replaced by stochastic processes using pseudo-random sequences and simple logic gates are used as basic computing elements. Using Back-propagation algorithm both feed-forward and learning phases are efficiently implemented with simple logical gates. RNG architecture using LFSR and barrel shifter are adopted to avoid some correlation between pulse trains. Suggested network is designed in digital circuit and its performance is verified by computer simulation.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.158-163
• /
• 2003

This paper assesses the two-equation turbulence models available in a commercial code, FLUENT, for heat transfer in a turbulent heated pipe flow. In case of flow under $Re_D=10,000$, Standard $\kappa-\epsilon$ and Realizable $\kappa-\epsilon$ models overpredict the Nusselt number about $20\%$ compared with the experimental correlation, and RNG $\kappa-\epsilon$ model overpredicts about $30\%$ when the two-layer zonal method is employed. When wall function method is adopted, all $\kappa-\epsilon$ models show better predictions. Standard $\kappa-\omega$ and SST $\kappa-\omega$ models have the dependency on the first grid point ($0.3). As Reynolds number becomes high, the predictions of all $\kappa-\epsilon$ and $\kappa-\omega$ models are in a good agreement with the experimental correlation.

• Journal of computational fluids engineering
• /
• v.14 no.2
• /
• pp.39-45
• /
• 2009

In engine room, proper enclosure system is preferable for reducing noise level but the enclosure system in the engine room causes bad influence on cooling performance due to poor ventilation. Cooling efficiency of the enclosure system can be improved by varying fan speed and proper flow path for ventilation. In this study, numerical analysis is performed to assess cooling effect of the enclosure system using finite volume method. The RNG k-$\varepsilon$ model is adopted for turbulence model along with heat exchanger model and porous media model for heat exchanger analysis, and moving reference frame model for rotational fan. Verification result shows reasonable agreement with experimental data. Analysis results show direct effect of velocity and temperature distribution on cooling ability in the enclosure system. Enclosure system of case B shows high heat transfer coefficient and has the smallest area ratio of opened flow passages which is good for noise level reduction.

• Particle and aerosol research
• /
• v.10 no.4
• /
• pp.155-162
• /
• 2014

The internal temperature will change depending on operation conditions and material of cyclone dust collector. This study compares the results of collection efficiency and temperature distribution on the different heat flux at wall of dust collector. The previous researcher's experiment results were used to confirm the reliability of CFD(Computational Fluid Dynamics) model. Based on this verified CFD model, we extended the analysis on the cyclone dust collectors. In CFD study, we used RNG k-epsilon model for analysis of turbulence flow, fluid is air, the velocity at inlet is 10 m/s, the temperature of air is $600^{\circ}C$. Because of the difference of outer vortex and inner vortex temperature, the collection efficiency will reduce with the increase of heat flux, showed the highest collection efficiency at heat insulation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.645-648
• /
• 2010

본 연구에서는 복단면 사행수로의 흐름특성과 수위특성을 정량적으로 분석하고자 코사인 유도형(cosine-generated) 복단면 만곡 수로 실험 자료를 기초로 3차원 수치모의를 수행하였다. 수치모의에는 3차원 수치모의 프로그램인 Flow3D을 사용하였고, 난류 모델은 RNG ${\kappa}-{\epsilon}$ 모델을 사용 하였다. 수치모의 결과는 실험 결과와의 비교를 통하여 평면유속분포 및 유속벡터, 만곡부 단면에서의 수위분포 등으로 분석하였고, 이는 이전의 실험결과와 일치하는 것으로 나타난다. 특히, 평면 유속분포는 수위 증가에 따라 저수로 중심의 최대 유속선이 만곡 내측으로 이동하는 것이 모의되었다. 이런 흐름구조는 다른 연구자들이 이전까지 연구한 실험 및 수치모의 결과와도 일치한다. 또한, 수위 분포 결과에서는 사행하도의 원심력에 의한 흐름특성인 만곡부 내측과 외측의 수위차가 미세하게 발견되었다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.2
• /
• pp.319-324
• /
• 1996

Using random pulse stream, a number can be transformed to the pulse stream with the probability value. So the digital value are computed by simple digital gates. Thus it will be possible to build a small and strong noise immunity processing element. We propose a faster convergence algorithm using a new methods for better performance of Random Number Generator(RNG) an the nonlinear transfer function(Sigmoid function)in this paper. And a feedback circuit were fitted for pulse stream in this paper. We proposed method is simulated with C program language and conformed by circuit implementation. Finally a system for hand written number recognition is constructed by FPGA and its performance verified.