• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.272-274
• /
• 2002

The contribution of light in high-energy film dosimetry was examined using six commercially available solid water substitute phantoms. As six commercially available phantoms; RMI-451, Mix-DP, WE211, WE211-Black, PMMA and PMMA Black were evaluated in this study. It is difficult to evaluate the contribution of Cerenkov radiation and the optical permeability to the relative and/or absolute dosimetry using unpacked film in these phantoms. Therefore the contribution of Cerenkov radiation was estimated by the comparison between film densities in the shielded side (shutting off the light) and unshielded sides on a phantom. The effect of optical permeability was measured under ambient light by the time scale method. The results suggest that the use of black colored phantoms may improve the accuracy of dose measurement in film dosimetry.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2006년도 학술대회
• /
• pp.269-272
• /
• 2006

홈 엔터테인먼트 서비스는 홈 네트워크 서비스의 하나로서 홈 네트워크를 통해 제공되는 TV, 영화, 게임과 같은 다양한 디지털 콘텐츠를 TV라는 매체를 통해 PC와 같은 TV와는 다른 디바이스에 존재하는 다양한 콘텐츠를 손쉽게 즐길 수 있는 콘텐츠 서비스의 형태라고 할 수 있다. 이러한 다양한 기기에 존재하는 콘텐츠를 손쉽게 이용할 수 있는 허브 장치로서 STB(Set-top Box)가 대두되고 있다. STB가 허브 장치로서의 기능을 하기 위해서는 서로 다른 기기들과의 연계시 발생하는 여러 문제점들(예 : 조작의 불편)을 해결하고 이를 통합 조정할 수 있는 어플리케이션이 필요하다. 본 논문에서는 STB와 멀티미디어 기기 중의 하나인 HTPC(Home Theater PC)를 예를 들어 두 기기간의 연동 환경에서 STB 리모컨을 통해 HTPC를 제어할 수 있는 어플리케이션에 대해 연구한다. 이를 위해 이종 단말기 간의 연동을 위해 RMI(Remote Method Invocation)의 클라이언트/서버 통신 메커니즘을 응용하였다. 이를 통해 HTPC 뿐만이 아닌 다양한 디바이스를 STB에 연결하여 활용할 수 있는 좋은 예가 될 수 있을 것이다.

• 한국정밀공학회지
• /
• 제31권5호
• /
• pp.375-380
• /
• 2014

To enhance biocompatibility between the orthopedic implant stem and obsteoblast cells, bone-forming cells, micro-size holes are patterned in Ti plate surface. Initially, the house built laser power stabilization system is applied to the laser micro patterning machine to convince repeatable result. Various pulse widths are irradiated Ti plate and relationship between diameters of patterned holes and pulsed width is derived. Effect of multi pulse is observed and optimal pulse number is considered to avoid heat affected zone. After MG-63 osbeoblast cells are cultured, micro patterned Ti plates are compared with control plates. In SEM image, cells are well aligned and aggregation is observed in both 60, and $100{\mu}m$ patterned plates. Finally, free form surface stem model is prepared to test micro hole patterning.

• 전자공학회논문지CI
• /
• 제49권2호
• /
• pp.75-82
• /
• 2012

이형의 단말 플랫폼간의 유연하고 효율적인 통신은 로봇과 스마트 환경이 함께 증강된 기능을 구성하여 협업하기 위해 매우 중요하다. 기존의 네트워크 로봇 소프트웨어 플랫폼에서는 CORBA와 같은 범용의 통신 미들웨어를 사용하는 경우가 많았다. 그러나 범용의 통신 미들웨어는 너무 무겁고 사용이 복잡할 뿐만 아니라, 네트워크 로봇에 특화된 기능을 제공하지 못한다. 따라서 본 논문에서는 TCP에 기반 한 원격객체함수 호출방식의 새로운 통신 프레임워크를 제안한다. 전송계층과 원격객체호출 계층으로 분리하여, 각 계층별로 다양한 특화 기능을 제공함으로써 스마트 환경에서 로봇과 다양한 단말이 효과적으로 통신할 수 있도록 한다.

• 정보처리학회논문지D
• /
• 제9D권1호
• /
• pp.81-90
• /
• 2002

More than 50% of defects and errors in the software development projects are related to the requirements[14]. But the development methodologies can not provide enough supports to the requirements management and changes. In the real world, the requirements keep changing as the requirements at the early development phase are usually incomplete, the developer′s understanding of the problem will be constantly changed during the software process, and new requirements may emerge with the organizational and environmental changes. In this paper, a requirements management process that can be integrated into the development methodologies is proposed to extend the requirements management over the whole development life-cycle and to support the requirements changes at the design/implementation/test phases. To evaluate the proposed process, it was compared to the existing requirements managements processes and models, and examined through a integration test with a widely used development methodology "MaRMI" to show the expected improvements at each development phase.

• Journal of Magnetics
• /
• 제22권2호
• /
• pp.227-233
• /
• 2017

The purpose of this study was to evaluate the effects of X-ray photon energy, tissue density, and the kernel essential for image reconstruction on the image quality by measuring HU and noise. Images were obtained by scanning the RMI density phantom within the CT device, and HU and noise were measured as follows: images were obtained by varying the tube voltages, the tube currents and eight different kernels. The greater the voltage-dependent change in the HU value but the noise was decreased. At all densities, changes in the tube current did not exert any significant influence on the HU value, whereas the noise value gradually decreased as the tube current increased. At all densities, changes in the kernel did not exert any significant influence on the HU value. The noise value gradually increased in the lower kernel range, but rapidly increased in the higher kernel range. HU is influenced by voltage and density, and noise is influenced by voltage, current, kernel, and density. This affects contrast resolution and spatial resolution.

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.831-835
• /
• 2010

Currently, engineering design is carried out in a distributed manner geographically or physically. This imposes new requirements on the computational environments, such as efficient integration and collaboration in the Internet and network environments. Meanwhile, Web-based distributed design has led new paradigms in design and manufacturing fields. For example, Web-based technologies have reduced the product development time and to ensure a competitive product in order to exchange and interact of real-time design information that integrates the distributed design environment between departments as well as companies via Internet and Web. Hence, efficient data communication for design information sharing is the basis for collaborative systems in the distributed environments. Design data communication techniques such as CORBA, DCOM, and JAVA RMI have been considered in the existing research, but these techniques have some disadvantages such as limitations of interoperability and firewall problems. This paper presents the application of engineering design problems in which distributed design information resources are integrated and exchanged using Web Service for supporting XML and HTTP without interoperability and firewall problems.

• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2003년도 추계학술대회
• /
• pp.233-240
• /
• 2003

To develop high-quality software systems satisfying the customer's needs, user-centered design (UCD) process has been emphasized in the area of human-computer interaction. And component-based development (CBD) has been extensively studied to realize a systematic software reuse, thereby reducing the time-to-market and the development cost. Balanced integration of user-centered design process and CBD process will be a promising way for successful software construction, which effectively achieves three goals: the quality of software, the cost of software development, and the time-to-market. However, traditional CBD methodology seems to lack the concept of user-centered design process and the relevant methods. This paper proposes a way of incorporating user-centered design process into a CBD methodology. Firstly, this paper gives the brief introduction of UCD. Secondly, we explain typical UCD activities and methods along the phase of systems development lifecycle and propose the use of usability maturity model (UMM) for integrating UCD activities and methods with those of CBD methodology. Finally, as a case study, we describe the results of comparing the UCD activities to the activities of MaRMI-III, which has been developed as a CBD methodology at ETRI.

• 한국의학물리학회지:의학물리
• /
• 제31권4호
• /
• pp.153-162
• /
• 2020

Purpose: We aim to evaluate the accuracy and effectiveness of an automatically converted radiation therapy plan between Radixact machines by comparing the original plan with the transferred plan. Methods: The study involved a total of 20 patients for each randomly selected treatment site who received radiation treatment with Radixact. We set up the cheese phantom (Gammex RMI, Middleton, WI, USA) with an Exradin A1SL ion chamber (Standard Imaging, Madison, WI, USA) and GAFCHROMIC EBT3 film (International Specialty Products, Wayne, NJ, USA) inserted. We used three methods to evaluate an automatically converted radiation therapy plan using the features of the Plan transfer. First, we evaluated and compared Planning target volume (PTV) coverage (homogeneity index, HI; conformity index, CI) and organs at risk (OAR) dose statistics. Second, we compared the absolute dose using an ion chamber. Lastly, we analyzed gamma passing rates using film. Results: Our results showed that the difference in PTV coverage was 1.72% in HI and 0.17% in CI, and majority of the difference in OAR was within 1% across all sites. The difference (%) in absolute dose values was averaging 0.74%. In addition, the gamma passing rate was 99.64% for 3%/3 mm and 97.08% for 2%/2 mm. Conclusions: The Plan transfer function can be reliably used in appropriate situations.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2010년도 춘계학술발표대회
• /
• pp.997-1000
• /
• 2010

최근 분산자바기술의 발전에 따라 다양한 애플리케이션의 단위기능들은 어디서나 호출 가능한 서비스로 정의되고 있으며, 또한 이러한 서비스들은 새로운 애플리케이션을 구성하기 위한 단위기능으로 사용되고 있다. 특히 RMI, CORBA 등은 가장 널리 활용되고 있는 원격 메서드 또는 서비스 호출 프레임워크로 분산 자바애플리케이션 개발을 위한 중요한 기술이라 할 수 있다. 그러나 이러한 기술들은 모두 원격메서드 또는 서비스의 호출을 위해 클라이언트사이드에서 스텁을 활용하는 기술로, 스텝의 정적생성 및 동기화 필요성으로 인해 다소 사용자 편의성 및 서비스의 접근성이 저해되는 측면이 있다. 따라서 본 논문에서는 이러한 스텁의 생성이 필요 없는 비스텁 방식의 효율적인 원격자바메서드 호출기법을 제시한다. 이 기법을 활용할 경우, 사용자 측면에서 별도의 스텁 없이 원격지의 서비스를 자유롭게 호출할 수 있어 사용자의 편의성 및 서비스 접근성을 크게 향상시킬 수 있으며, 원격 서비스 변경에 따른 동적 서비스 재구성 또한 지원할 수 있어 보다 유연한 애플리케이션 개발이 가능하다.