• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.277-286
• /
• 2010

In this paper we analyse radiation measurement method for UWB wireless system of the wideband low power frequency characteristics. In the radiation measurement environment we discuss RMS electric field strength, UWB PSD, UWB detect signal level, UWB noise signal collection etc.. also, we discuss power measure method of the CISPR16-1, low level e.i.r.p radiation measurement method. lastly we analyse consideration problem for the signal analyser of the UWB system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.6
• /
• pp.438-444
• /
• 2019

In this paper, we proposed a 16-element array antenna design to improve signal detection performances. The array antenna characteristics, such as mutual coupling, pattern deviation, and half power beamwidth of the active element, were examined to obtain an optimal spacing between individual elements. The single element of the array antenna consists of an indirect feed using L-shaped feed and shorted radiating patch to achieve a broadband operation. Root mean square(RMS) errors based on the incident angle of the signal were calculated to verify the signal detection performance of the proposed antenna. The results demonstrate that the proposed array antenna with optimal spacing is suitable for detecting interference signals with low RMS error.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.58-63
• /
• 1993

The charactistics of AE(Acoustic Emission) signal is related to cutting conditions, tool materials and tool geometry in metal cutting. The tool geometry change which is derived from tool wear affects the source of AE signal in machining process. The relationship between AE signal and tool wear was experimentally investigated. THe value of RMS(Root Mean Sequare) and Amplitude of AE signal were increased in tool wear condition. Also the high value of Count per Hit and Count vs. Frequency was observed in this condtion. As a result, tool wear can be effectively detected by AE signal during cutting operation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.64-71
• /
• 1998

This paper investigates the relationship between cutting conditions and Acoustic Emission(AE) signals; $AE_{avg}$, $AE_{rms}$, $AE_{mode}$$AE_{avg}$ and $AE_{rms}$ are increased as the increasing of cutting velocity and depth of cut respectively. The new parameters, derived from $AE_{avg}$ and $AE_{rms}$, which may be used for the in-process detection of tool wear is discussed. It is also known that $AE_{mode}$

• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.341-346
• /
• 2014

This paper has presented the design and fabrication of phase correlator for wideband digital frequency discriminator (DFD) operating over the 6.0 to 18.0 GHz frequency range. Fabricated DFD phase correlator has been measured I or Q output signal, and analyzed frequency discrimination error. The operation of the proposed mixer type correlator has been analyzed by deriving some analytic equations. To design the phase correlator, this paper has modeled and simulated IQ mixer and 8-way power divider by using RF simulation tool. Designed phase correlator has fabricated and measured. The phase error and frequency discrimination error have been presented using by measured I and Q output signal. Over the 6.0~18.0 GHz range, the root mean square(RMS) phase error is $4.81^{\circ}$, RMS and frequency discrimination error is 1.49 MHz, RMS.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.3
• /
• pp.368-373
• /
• 1999

Topex/Poseidon sea surface heights are compared to tide gauge sea levels in the South Indian Ocean in the period of January 1993 to December 1995. A user's handbook (AVISO) for processing sea surface height data was used in this study. Topex/Poseidon sea surface heights were obtained from satellite data at the proximity of tide gauge stations. These data were reproduced by a linear interpolation with the interval of 10 days and were processed by the Gaussian filter with a 60-day window. The tide gauge sea levels were obtained in the same manner as the satellite data. The main results on RMS (Root-Mean-Square) and CORR (CORRelation coefficient) in our study were shown as follows: 1) on the characteristics between two data (in-situ and model data), the results (RMS=2.96 cm & CORR=$92\%$ in the Amsterdam plateau, and RMS=3.45 cm & CORR=$59\%$ in the Crozet plateau) of the comparison of Topex/Poseidon sea surface heights with tide gauge sea levels, which was calculated by in-situ data of obsewed station showed generally low values in RMS and high values in CORR against to the results (RMS=4.69 cm & CORR=$79\%$ in the Amsterdam plateau, and RMS= 6.29 cm & CORR= $49\%$ in the Crozet plateau) of the comparison of Topex/Poseidon sea surface heights with tide gauge sea levels, which was calculated by model data of ECMWF (European Center for Medium-range Weather Forecasting), and 2) on the characteristics between two areas (Kerguelen plateau and island), the results (RMS=3.28 cm & CORR= $54\%$ in the Kerguelen plateau) of open sea area showed low values in RMS and high values in CORR against to the results (RMS= 5.71 cm & CORR=$38\%$ in the Kerguelen island) of coast area, respectively.

• Journal of Welding and Joining
• /
• v.32 no.6
• /
• pp.64-69
• /
• 2014

The applications by using fiber laser have increased recently. However, due to high beam quality of fiber laser, it is inappropriate to apply the existing laser welding monitoring technology to the fiber laser welding as it is. On this study, thus, we analyzed emission signal with RMS and FFT for the in-process monitoring during fiber laser welding. 12mm-thick 304L stainless steel sheet was used in fiber laser welding and the result showed as follows: The intensity changes in RMS did not clarify the distinction between full penetration and partial penetration. However, as welding speed increases, specific frequency also increases in regards of frequency analysis by using FFT.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.149-150
• /
• 2006

In this paper, design, simulation, fabrication method, and measured results of a digital frequency discriminator(DFD) operating in E, F, and G band are introduced. We describe the direct conversion scheme(DCS) with microwave integrated-circuit(MIC) developed for the small-area and high-speed system. When the input signal is the pulse with a pulse width of 100 ns, accuracy of frequencies measured by the DFD has 1.335 MHz RMS at no noise and 2.64 MHz RMS at signal-to-noise(S/N) ratio within 3 dB in E, F, and G band, which nearly satisfy the specification of 2.5 MHz RMS.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.7
• /
• pp.110-116
• /
• 1994

In this paper a Duty Effective Overlap Scanning method (DEOS) for the improvement of driving efficiency of LC displays which have the RMS voltage responding characteristics is proposed and new processing method of data signals for optimum application of this method is also proposed. Proposed method has a few advantages such as the increment of duty ratio the increment of driving power loaded on LC cell and the decrement of RMS voltage error rate caused by signal attenuation on electrodes composing of display when compared with the conventional method which is called as optimum voltage amplitude selection method. And also by adopting new data signal processing method which has 3 kinds of voltage levels additional advantage much improving crosstalk phenomenon which is the most serious problems of simple matrix structured display is obtained. For the characteristic estimation new mathematical representation for new overlap scanning method and data signal processing method are induced and defined. And by the defined formula and simulation the characteristics of the proposed method and the conventional method are compared and analyzed. As a result of estimation this new method being able to optimize the overlap rate of scan signal and using 3 levels of data signals has the characteristic which can improve the driving efficiency of LC displays.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.90-96
• /
• 1998

The ductile cast iron is austempered at 300, 350 and 40$0^{\circ}C$ temperature in order to investigate the basic factors for monitoring drill wear in automatic production process, and cutting force and AE RMS signals are measured with changing cutting condition for ADI(Austempered Ductile Cast Iron) with different mechanical properties. The signals of cutting force were influenced by cutting speed and feedrate greatly. On the other hand AE RMS signals are influenced by cutting speed where as it is not related with feedrate. As the depth of drilling increases, cutting force shows a slow increase and the value of AE RMS increases until the range of h/d=4. But over the range it increases greatly due to an amount of chip discharge and friction with inner wall of drilling hole, etc. As the drill diameter increases at a constant depth of drilling. Cutting force increases linearly, but the level of AE RMS does not increases linearly due to circumferential velocity and great influence of h/d.