• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.9
• /
• pp.1338-1343
• /
• 2016

The purpose of this study was to investigate the quality characteristics and antioxidant activities of noodles added with red lentil powder (RLP). Noodles were prepared by addition of 0, 15, 30, and 45% powder to flour of the basic formulation. RLP noodles were evaluated for their cooking properties (weight, water absorption, volume, and turbidity), color values, texture characteristics, sensory characteristics, and antioxidant activities. The weight, water absorption, and volume of cooked RLP noodles increased according to RLP content. The turbidity values of cooking water increased according to RLP content. The L value of RLP noodles decreased with increasing amounts of RLP, whereas a and b values increased with increasing amounts of RLP. The texture characteristics of RLP noodles decreased compared to those of control noodles except for adhesiveness. Antioxidative activities of RLP noodles significantly increased with increasing RLP content (P<0.05). The sensory preference test revealed that RLP 30% noodles showed the highest scores for smell, taste, chewiness, and overall preferences. It is suggested that RLP 30% noodles could be substituted for wheat flour to improve noodle quality.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.486-490
• /
• 2008

본 논문에서는 Spurious NAK Suppression알고리즘을 통하여 RLP의 성능향상에 대한 기법을 제안한다. 일반적으로, Hybrid ARQ기법에서는 MAC과 Physical Layer에서의 Retransmission 및 Error Correction으로 무선환경에서의 Error를 줄이고 latency를 보장하고 있다. 그러나 Hybrid ARQ에서의 Multiple SAW나 Selective-ARQ에 의해서 인접한 Packet들 간의 out-of-sequence문제가 발생할 수 밖에 없으며, upper layer인 RLP(혹은 RLC)에서는 이를 re-sequencing하여야 하는 부담감이 생기게 된다. 본 논문에서는 RLP receiver에서의 re-sequencing방법에 있어서, 효율적으로 RLP-NAK의 전송시점을 결정하는 NAK suppression 방법을 제안하고 있으며, 실험을 통하여 높은 성능향상을 보임을 확인할 수 있다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.413-418
• /
• 2021

In this study, as a basic study to use recycled limestone powder as a secondary product mixture for concrete, it was found that the compressive and flexural strengths were equal to or slightly improved compared to Plain up to 10% and 20% of the RLP mixing ratio, but the strength was rather decreased at 30% mixing. As a result of the heat of hydration experiment, as the RLP mixing rate increased, the heat of hydration decreased, and the elapsed time of the maximum heat was also delayed. As a result of the drying shrinkage test, as the fine powder RLP filled the internal pores of the cement mortar, the drying shrinkage decreased as the mixing rate increased. The compressive strength, water absorption rate, and compressive strength after freezing and thawing of the concrete block mixed with RLP 20% all satisfied the group standard criteria of the Korea Concrete Industry Cooperative Federation, confirming the possibility of use as a mixed material.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.223-225
• /
• 2003

본 논문에서는 CDMA 2000 1x망에 기반한 유무선 통합망에서 무선망의 품질을 측정하기 위해 RLP NAK Rate를 사용하는 방법을 제안한다. 무선망은 유선망과 다른 특성을 가지며 무선망에 적절히 대응하는 전송 알고리즘을 적용하기 위해서는 무선망의 정확한 품질 측정이 필요하다. 이를 위해 유무선 통합망에서 유선의 영향없이 무선망의 품질만을 측정할 수 있는 RLP NAK Rate를 제안하고, 이를 통하여 무선망의 품질을 확인할 수 있음을 실험을 통해 밝힌다.

• Journal of information and communication convergence engineering
• /
• v.2 no.1
• /
• pp.9-14
• /
• 2004

In this paper the modeling of the RLP layer in CDMA2000 is presented, which uses the NAK based ARQ scheme for Random Error Channels. The RLP performs a partial link recovery through limited number of RLP frame transmission in case of frame error. In case when the RLP fails due to excessive frame error, the control is passed on to the higher (TCP) layer. The TCP layer provides the complete end-to-end recovery. Thus the reliable performance at the TCP/RLP is essential to maintain the required Quality of Service in the DS-CDMA wireless links. The modeling is done for the performance analysis of the system in terms of the throughput and the mean extra delays, which are calculated analytically and are compared with the results generated by the simulations. This paper studies the effect of the random errors over different types of RLP frame formats and also the performance of the NAK based ARQ mechanism used under these conditions. The simulation provides with the over all characteristics of the throughput and the mean extra delay in terms of realistic environment parameters like Eb/No and probability of packet error (PE), based on the channel conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5B
• /
• pp.369-380
• /
• 2003

In the CDMA wireless link, frame errors are correlated and burst because of fading. The implementation ability of RLP error recovery is dependent on the correlated frame errors. The (1,2,3) retransmission scheme, which is recommended as default in IS-707, is not adapted in high frame loss regime with strong correlations. By using the modified error recovery method, where the total number of retransmission attempts is the same and the retransmission is increased, the proposed retransmission scheme can efficiently recover frame errors than the (1,2,3) retransmission scheme. Since the modified scheme has longer transmission delay due to the increase of retransmission round, we propose the algorithm of retransmission failure prediction to improve the modified error recovery scheme. We simulate the modified error recovery scheme applying our algorithm and compare two schemes. (i.e. default scheme by IS-707 and modified scheme) not applying our algorithm. In the result, we show TCP performance improvement is better than default scheme by IS-707.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.57-60
• /
• 2001

This paper has studied the WAP packet transmission time, using WTP SAR algorithm. One method that is improved transfer ability, SAR fragmented WTP total message down from upper layer and then packet is transmitted to RLP frame time slot. In this paper, we analysis the transmission time of WAP packet with variable HLP layer size on the CDMA wireless channel for next generation systems as well as PCS, DCS. From the results, we can obtain the WAP packet transmission time and optimal WTP packet size.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.47-53
• /
• 2012

In this paper, we present an algorithm called redundant logical paths (RLP) for efficient HSR traffic reduction. It creates redundant logical paths between each HSR node and all the other nodes. Eventually, a logical full-meshed network or paths will be established among all HSR node types, except the Quadbox type, which is used only for interconnection. The logical full-meshed network will be used instead of using the standard HSR protocol that depends on the concepts of the duplication and forwarding of the received frame until it reaches the destination node. The RLP algorithm results in significantly less frame traffic because there is no random forwarding as in the standard HSR protocol. For the sample network in this paper simulation results showed a 61.5-80% reduction in network frame traffic compared to the standard HSR. Our algorithm will avoid latency issues in the network and even network congestion, thus improving network efficiency.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2452-2454
• /
• 2001

KEPRI, the research institute for KEPCO, has started developing a DAS using wireless communication networks since 1999. The wireless networks adopted Radio Link Protocol (RLP) of Personal Communication Service (PCS) as communication protocol. It is the first time that PCS is applied to data networks for DAS. The communication protocol, RLP, makes the DAS networks simple and economically affordable when they are installed at widely dispersed small cities. But, RLP has problem when it send unsolicited message. This paper describes the implementing method of a wireless network using RLP and TCP/IP Network to cope with unsolicited message problem.

• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.69-76
• /
• 2002

With the growth of data communication service by mobile devices, WAP is proposed to efficiently access the Internet contents by user request through wireless condition that has a high error rate and mobility. But, because a transmission speed of WAP is limited, it takes many times to transmit and to receive the data. This paper has studied the WAP packet transmission time using WTP-SAR algorithm. As a method that is to improve transfer capability of WAP, using SAR function in WTP, total message down from upper layer has been fragmented and packet is transmitted through RLP frame time slot. Then, we have analyzed the transmission time of WAP packet with variable RLP layer size on the wireless CDMA network for next generation systems. From the results, we could obtain the WAP packet transmission time and optimal WTP packet size.