• KIPE Magazine
• /
• v.9 no.2
• /
• pp.15-22
• /
• 2004

요즈음 AVR이 뜨고 있다. 전기기술 분야에서는 AVR이라고 하면 보통 자동전압조정기 (Automatic Voltage Regulator)를 지칭하지만, 마이크로프로세서 시장에서 AVR이라고 하면 Atmel사의 작지만 강력한 8비트 RISC 마이크로콘트롤러 시리즈를 지칭한다. 1984년에 설립된 미국의 신생 반도체 회사인 Atmel에서 1997년에 처음 발표하여 불과 7년 정도의 짧은 역사를 가지고 있는 AVR이 시장에서 기라성 같은 선배 제품들을 속속 물리치고 강세를 보이는 괴력을 발휘하고 있다.(중략)

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.4
• /
• pp.467-478
• /
• 1999

실시간 태스크의 최악 실행시간을 예측할 때 과예측이 발생하는 원인은, 첫째 프로그램의 동적인 최악 실행 행태를 정적으로 분석하는 것이 근본적으로 어렵기 때문이며, 둘째 최근의 RISC 형태 프로세서에 포함되어 있는 파이프라인 실행 구조와 캐쉬 등이 그러한 정적 분석을 더욱 어렵게 만들기 때문이다. 그런데 기존의 연구에서는 각각의 과예측 원인을 해결하기 위한 방법에 대해서만 언급하고 있을 뿐 분석의 정확도에서 각 원인이 차지하는 비중에 대해서는 언급하고 있지 않다. 이에 본 연구에서는 최악 실행시간 예측시 과예측을 유발하는 원인들, 즉 분석 요소들의 영향을 정량적으로 조사함으로써 기존의 최악 실행시간 분석 기법들이 보완해야 할 방향을 제시하고자 한다. 본 연구에서는 실험이 특정 분석 기법에 의존하지 않도록 하기 위하여 시뮬레이션 방법에 기반한다. 이를 위해 분석 요소별 스위치가 포함된 MIPS R3000 프로세서를 위한 시뮬레이터를 구현하였는데, 각 스위치는 해당 분석 요소에 대한 분석의 정확도 수준을 결정한다. 모든 스위치 조합에 대해서 시뮬레이션을 반복 수행한 다음 분산 분석을 수행하여 어떤 분석 요소가 가장 큰 영향을 끼치는지 고찰한다.Abstract Existing analysis techniques for estimating the worst case execution time (WCET) of real-time tasks still suffer from significant overestimation due to two types of overestimation sources. First, it is unavoidably difficult to predict dynamic behavior of programs statically. Second, pipelined execution and caching found in recent RISC-style processors even more complicate such a prediction. Although these overestimation sources have been attacked in many existing analysis techniques, we cannot find in the literature any description about questions like which one is most important. Thus, in this paper, we quantitatively analyze the impacts of overestimation sources on the accuracy of the worst case timing analysis. Using the results, we can identify dominant overestimation sources that should be analyzed more accurately to get tighter WCET estimations. To make our method independent of any existing analysis techniques, we use simulation based methodology. We have implemented a MIPS R3000 simulator equipped with several switches, each of which determines the accuracy level of the timing analysis for the corresponding overestimation source. After repeating simulation for all of the switch combinations, we perform the variance analysis and study which factor has the largest impact on the accuracy of the predicted WCETs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.771-782
• /
• 2000

In this paper, an H.263 video codec is implemented by adopting the concept of hardware and software co-design. Each module of the codec is investigated to find which approach between hardware and software is better to achieve real-time processing speed as well as flexibility. The hardware portion includes motion-related engines, such as motion estimation and compensation, and a memory control part. The remaining portion of theH.263 video codec is implemented in software using a RISC processor. This paper also introduces efficient design methods for hardware and software modules. In hardware, an area-efficient architecture for the motion estimator of a multi-resolution block matching algorithm using multiple candidates and spatial correlation in motion vector fields (MRMCS), is suggested to reduce the chip size. Software optimization techniques are also explored by using the statistics of transformed coefficients and the minimum sum of absolute difference (SAD)obtained from the motion estimator.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.1
• /
• pp.395-399
• /
• 2019

In order to support various parallel computing systems, it is necessary to extend LLVM IR to more efficiently support vector / matrix and to design LLVM IR to machine code as a new algorithm. As shown in the IR example, RISC instruction generation is naturally generated because the RISC instruction is basically composed of the RISC instruction, and the vector instruction is also not supported. There is a need for new IR structures, command generation algorithms and related extensions to support vector / matrix more robustly. To do this, it is important to map each instruction in the LLVM IR to the appropriate instruction in the target architecture (vector / matrix) (instruction selection algorithm). It is necessary to understand the meaning of LLVM IR command, to compare the meaning of each instruction of the target architecture with syntax, and to select the instruction that matches the pattern to make mapping efficient.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.10
• /
• pp.1502-1507
• /
• 2012

In order to overcome the hardware complexity and power consumption problems, recently the multi-core architecture has been prevalent. For hardware simplicity, usually RISC processor is adopted as the unit core processor. However, if the performance of unit core processor is enhanced, the overall performance of the multi-core processor architecture can be further increased. In this paper, out-of-order superscalar processor is utilized for the multi-core processor architecture. Using SPEC 2000 benchmarks as input, the trace-driven simulation has been performed for the out-of-order superscalar cores between 2 and 16 extensively. As a result, the 16-core out-of-order superscalar processor for the window size of 16 resulted in 17.4 times speed up over the single-core out-of-order superscalar processor, and 50 times speed up over the single core RISC processor. When compared for the same number of cores on the average, the multi-core out-of-order superscalar processor performance achieved 3.2 times speed up over the multi-core RISC processor and 1.6 times speed up over the multi-core in-order superscalar processor.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.6
• /
• pp.11-17
• /
• 2001

Design and implementation of the MAC protocol processor prototype for high speed wireless LAN, which has interface with 5GHz OFDM PHY layer, is presented. We analyze the IEEE 802.11 MAC protocol specification and then separate the MAC protocol functions to be implemented by hardware and firmware and define the interface in which frames can be exchanged. That is, it is considered that high speed queue processing and interfaces with RISC processor and OFDM PHY layer. Protocol control and transmission/reception functions of the MAC functions are implemented in hardware in order to guarantee high speed processing in MAC layer. The developed MAC hardware block operates at 10MHz main clock. Therefore, transmission rate in PHY layer is about 80Mbps because data transmission/reception between MAC layer and PHY layer is performed as unit of octet. The designed FPGA MAC function chip has been implemented in wireless LAN test board and it is verified that DCF function is operated correctly.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.9
• /
• pp.1-12
• /
• 1999

In this paper, we designed an embedded processor with 128Kbytes EPROM and 4Kbytes SRAM based on GMS30C2132 which RISC processor with DSP functions. And a new architecture of bus sharing to control the embedded memory and external memory unit i proposed aiming at one-cycle access between memories and CPU. For embedded 128Kbytes EPROM, we designed the new expansion interface for data size at data ordering with memory organization and the efficient interface for test. The embedded SRAM supports an extended stack area high speed DSP operation, instruction cache and variable data-length control which is accessed with 4K modulo addressing schemes. The proposed new architecture and circuits reduced the memory access cycle time from 40ns and improved operation speed 2-times for program benchmark test. The chip is occupied $108.68mm^2$ using $0.6{\mu}m$ CMOS technology.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.329-332
• /
• 2002

The traditional debug tools for chip tests and software developments need a huge investment and a plenty of time. These problems can be overcome by Embedded Debugger based the JTAG boundary Scan Architecture. Thus, the IEEE 1149.1 standard is adopted by ASIC designers for the testability problems. We designed the RED(Reusable Embedded Debugger) using the JTAG boundary Scan Architecture. The proposed debugger is applicable for not a chip test but also a software debugging. Our debugger has an additional hardware module (EICEM : Embedded ICE Module) for more critical real-time debugging.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.927-930
• /
• 2003

In this paper, a design of processor IP for TCP/IP protocol stack is described. The processor consists of input and output buffer memory with dual bank structure, 32-bit RISC microprocessor core, DMA unit with on-the-fly checksum capability. To handle the various modes of TCP/IP protocol, hardware and software co-design approach is used rather than the conventional state machine based design. To eliminate delay time due to the data transfer and checksum operation, DAM module which can execute the checksum operation on-the-fly along with data transfer operation is adopted. By programming the on-chip code ROM of RISC processor differently. the designed stack processor can support the packet format conversion operations required in the various TCP/IP protocols.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.107-113
• /
• 2005

In this paper, Web server is built up using PXA255, 32bit RISC processor with porting Embedded Linux and GoAhead HTTP(Hyper Text Transfer Protocol) web server, and the system which can monitor and control the environment and condition for AICC(Automatic Intelligent Cruise Control) is realized For sensing the operation condition and change of vehicle the desired data is derived by interfacing ECU(Electric Control Unit) and Embedded system and the rpm of engine is controlled by step motor connected to throttle valve.