• 한국문헌정보학회지
• /
• 제33권3호
• /
• pp.87-108
• /
• 1999

새로운 정보검색 환경인 인터넷에서의 정보검색은 과거의 정보검색행위와는 여러 면에서 다르다. 인터넷 이용자들은 과거의 정보 이용자와는 다른 행동 양식을 보이고 있기 때문에 보다 나은 서비스를 제공하기 위해서 인터넷 검색 시스템은 새로운 이용자들의 특성을 제대로 반영하여야 한다. 정보 수요자인 인터넷 이용자들의 검색 행동 성향을 조사, 분석하는 과정을 통해 이용자들의 요구사항을 파악하고, 이를 통하여 인터넷 기반 정보검색시스템 설계를 위한 가이드라인을 제시하고자 한다.

• 제어로봇시스템학회논문지
• /
• 제19권10호
• /
• pp.886-890
• /
• 2013

In this paper, a 3D coordinates acquisition method for a mechanical assembly is developed by using multiview X-ray images. The multi-view X-ray images of an object are obtained by a rotary table. From the rotation transformation, it is possible to obtain the 3D coordinates of corresponding edge points on multi-view X-ray images by triangulation. The edge detection algorithm in this paper is based on the attenuation characteristic of the X-ray. The 3D coordinates of the object points are represented on a graphic display, which is used for the inspection of a mechanical assembly.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2110-2115
• /
• 2008

In this study, We disigned and manufactured the Hot Chuck which can be operated until $120^{\circ}C$. Its shape is circular, wide is 300mm and depth is 15mm. Two types working fluid was used as working fluid(distilled water, 0.1%-$TiO_2$ nanofluid). The experimental results were compared to each working fluid. The effect of various working fluid, charging volume ratio was investigated. Also we investigated heat transfer rate against each working fluid. By using nanofluid, heat transfer rate can be enhanced and the wick structure can be constructed automatically on smooth surface. The experiment of 40% charged 0.1%-$TiO_2$ nanofluid showed the best performance of thermal accuracy and uniformity. To improve performance of Hot Chuck, more study is needed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2369-2374
• /
• 2008

In the precision hot plate for wafer processing, the temperature uniformity of upper plate surface is one of the key factors affecting the quality of wafers. Precision hot plates require temperature variations less than ${\pm}1.5%$ during heating to $120^{\circ}C$. In this study, we have manufactured the flat plate heat pipe hot chuck of circle type(300mm) and investigated the operating characteristics of flat plate heat pipe hot chuck experimentally. Various liquids(aceton, FC-40, water) were used as the working fluid and charging ratio was changed($14{\sim}36\;vol.%$). Several cases were tested to improve temperature uniformity. Major working fluid to be investigated was water. Using water, various parameters such as charging ratio, wafer operation on-off time, different working fluids. In case of water, the temperature uniformity was ${\pm}1.5%$, response time of wafer were investigated.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제11권4호
• /
• pp.159-169
• /
• 2003

Five two-phase closed loop thermosyphons (TLTs) specially designed and constructed for the present study are one small scale loop, two medium scale loops (MSLI and MSLII) and two large scale loops (LSLI and LSLII). Two simulation models based on thermal resistance network, lumped and sectorial, are presented. In the Lumped model, the evaporator section is dealt as one lumped boiling section. Whereas, in the Sectorial model, all possible phenomena which would occur in the evaporator section due to the two-phase boiling process are considered in detail. Flow regimes, the flow transitions between flow regimes and other two-phase parameters involved in two-phase flows are carefully analyzed. In the present study, the results of two different simulation models are compared with experimental results. The comparisons showed that the simulation results by the Lumped model and by the Sectorial model did not show any partiality for the model used for the simulation. The simulation results according to the correlations show the various results in the large different range.

• 대한기계학회논문집B
• /
• 제30권3호
• /
• pp.246-254
• /
• 2006

The present study shows the experimental and modeling results of the cooling system using nanofludic loop thermosyphon. the experimental results show that nanofluid is not effective for small scale cooling system. The heat transfer performance is not much improved with the current small scale loop system comparing with the convectional water based loop system. In this study, various effects of nanofluids such as the concentration, the md of particle, host fluid, and heat capacity and so on were investigated. With nanofluid as the working fluid, the flow instability was improved at a certain concentration.

• 한국유기농업학회지
• /
• 제22권4호
• /
• pp.531-547
• /
• 2014

This study analyzed the effect of Greenhouse of wood pellet fuel conversing from Diesel. Analyzed through a life cycle assessment of greenhouse gas emissions of carbon dioxide for the environmental assessment, In evaluation of the Ministry of the Environment, analyzed through the life cycle assessment of carbon dioxide emissions of the greenhouse gas and, In the case of economic evaluation, we analyzed the investment payback period to the total revenue generated by each of the calculated incentive based on the RHI and institutions reduction projects a reduction of costs associated with the reduction of fuel costs.

• 대한교통학회지
• /
• 제22권7호
• /
• pp.91-98
• /
• 2004

본 연구는 통행자들을 실시간 교통정보의 유무외에 제공받는 교통정보의 내용에 따라서 구분한 다계층 통행배정모형을 정립하고자 한다. 이를 통해 네트워크 및 수요변화에 대응할 수 있는 우수한 교통정보제공전략인 분산환류전략(Decentralized Feedback Strategy ; DFS)의 핵심사항인 분산계수결정모형을 제시하고 ITS의 중요한 기술적 요소들(VMS위치, 정보제공주기, 정보제공영역 등)에 대한 판단기준을 정립하고자 한다. 이를 위하여 연동적 시간대 분석기법 (Rolling Horizon implementation ; RHI)을 활용한 다계층 동적통행배정모형을 개발하고 차량내탑재장치를 활용한 주행중 정보제공전략으로서 분산환류전략(DFS)의 적용성 및 효과성을 평가하고자 하였다. 본 연구에서는 차량내 탑재장치를 중심으로 교통정보를 제공받는 집단에 대해서 분석을 수행하였다. 이때 정보의 내용에 따라 동적 최단경로안내를 받는 그룹과 DFS에 의한 경로정보를 안내받는 그룹으로 나누어 다계층 동적통행배정 모형을 구성하였다. DFS의 적용을 위하여 정보대상노드에서 목적지까지 경로를 모두 탐색한 뒤 이들 경로에 대한 통행시간정보를 이용하여 통행자들의 인지통행비용이 같아지도록 교통류 분산계수를 설정하였다. 또한 이러한 분산계수가 적용되는 통행자를 구별하기 위하여 연동적 시간대분석기법(Rolling Horizon Imlementation)을 활용하여 동적통행배정을 수행하였다. 분석결과 유고상황시 DFS의 네트워크 총통행시간 개선효과를 확인할 수 있었다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제12권1호
• /
• pp.1-9
• /
• 2004

The purpose of the present study is to examine the heat transport limitations in a screen mesh heat pipe for electronic cooling by theoretical analysis. Diameter of pipe was 6mm, and mesh numbers were 50, 100, 150, 200 and 250, and water was investigated as working fluid. According to the change of mesh number, wick layer, inclination and saturation temperature, the maximum heat transport limitations by capillary, entraintment, sonic and boiling were analyzed by a theoretical design method of heat pipe, including capillary pressure, pumping pressure, liquid friction coefficient in wick, vapor friction coefficient, etc. Based on the results, the capillary limitation in a small diameter of heat pipe is largely affected by mesh number and wick layer. Mesh number of 250 is desirable not to be used in pipe diameter of 6 mm, because capillary heat transport limitation decreases by the abrupt increase of liquid friction pressure due to the small liquid flow area. For the heat transport of 15 watt in 6mm diameter pipe, mesh number of 100 and one layer is an optimum wick condition, which thermal resistance is the smallest.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제12권1호
• /
• pp.21-29
• /
• 2004

This paper is to study the heat transfer performance of the copper-water heat pipe with screen wicks. Recently, the semiconductor capacity of an electronic unit becomes larger, but its size becomes much smaller. As a result, a high- performance cooling system is needed. Experimental variables are inclination angles, temperatures of cooling waters and the mesh number of screen wicks. The distilled water was used as a working fluid. Based on the experimental results, when the copper-water heat pipe of 6mm diameter is used at the top heat mode, the heat transfer performance of 100 mesh 2 layers heat pipe is better than that of 150 and 200 mesh. The thermal resistance of the two layers with the 100-mesh screen was 0.7-$0.8^{\circ}C$/W.