• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1452-1458
• /
• 2009

In this paper, Our proposed Multipurpose Complex Card UHF band RFID small-size Tag antenna. Multi purpose Complex Card UHF band RFID small-size Tag antenna that is to minimize the low efficiency of RFID Tag Read Range that generates space limitation and a conductor surrounded by inducing fingerpring system with dual(HF, UHF) Card is presented. Our proposed UHF band RFID small-size Tag antenna is for the Multipurpose Complex Card that is mounted on the fingerpring system as well as the HF Tag. It also enables to minimize and facilitates Tag chip matching by adjusting Tapered, Meander line and Loop structure. Given the card substance properties and periphery circuit, the proposed small-size Tag antenna, in this report, is designed with PET film with size of $50{\times}15mm^2$. The RFID small-size Tag method for measurements is used by EPCglobal Static Test instrument in Anechoic Chamber, which is tested with dual Card, within the car and in wallet. It is found that Read Range is 3.8m from the EPCglobal Static Test, Maximum Read Range within the car from the field test results in 7.6m. Proposed Tag antenna is will be used in the parking control security system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.270-273
• /
• 2012

A plastic bolt shape UHF RFID tag has been developed for a live tree. The UHF tag is designed and installed into the head part of the bolt, inserted into a tree for management of tree. If the tag antenna is installed near the high dielectric constant material, the impedance of the tag antenna will be changed, and the tag does not work. Therefore, the dielectric constants of wood and plastic bolt are considered for tag antenna design. The input reflection coefficient characteristics and the reading range patterns are measured and compared. This UHF RFID tag can be applied into a live tree, and the status and location of tree can be controlled with the RFID tag. This developed UHF tag can be applied to any applications and objects using a bolt.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.2
• /
• pp.154-160
• /
• 2009

This paper describes a wide bandwidth RFID tag antenna design for protection of connection part between chip and antenna. A proposed tag antenna size, a resonant frequency and bandwidth are $53{\times}10{\times}1\;mm$, 900 MHz and 800 MHz($500{\sim}1,300\;MHz$) at -10 dB below, respectively. The dielectric materials with different relative permittivity such as polyethylene, glass and silicon were applied for protection of connection part between the proposed antenna and chip on the way of whole and partial housing. The measured return loss and radiation pattern agreed well with the calculation results. The read range of the proposed tag antenna without any housing and of tag antenna with housing covered over all by silicon with 3 mm thickness were observed about 5 m and 4 m, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.9
• /
• pp.679-684
• /
• 2017

This paper presents an UHF(Ultra High Frequency) band small cavity structured RFID(Radio Frequency Identification) tag antenna with a long reading range, designed to apply on metal cart or pallet for auto-parts logistics. The size of tag antennas is $140{\times}60{\times}10mm^3$, attached on a exporting metal cart, and it can give the information of inventory and logistics of carts. By collecting the exported carts and increasing the recovery rate of missing carts or pallets, the paid import tax can be refunded when the carts are returned back to the manufacture. The tag antenna was equipped with a cover to prevent damage, and the dielectric constant of the cover is considered for the simulation. The reading range of the tag antenna is 12 m using LP(Linear Polarization), 10 m with CP(Circular Polarization) reader antennas. This 920 MHz UHF RFID cavity tag ensures the long reading distance of the antenna regardless of the material of the object where it is attached.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.383-385
• /
• 2006

A new meander-line antenna consisting of two open-ended strips is proposed for a compact and broadband UHF radio frequency identification tag. An equivalent circuit model for the proposed antenna is derived and used to perform a simple and wideband impedance match to an arbitrary complex impedance of a tag chip without any additional matching network. The performance of the proposed antenna is validated by comparing calculated and measured results, which show good agreement.

• Journal of Navigation and Port Research
• /
• v.32 no.10
• /
• pp.805-811
• /
• 2008

This paper presents a design of RFID(Radio Frequency Identification) tag antenna which is available for a vehicle's side mirror and directivity characteristics by mr body. The proposed Tag antenna is designed symmetrical structure to improve the broad bandwidth characteristic and the readable range. A proposed tag antenna($30\;mm{\times}24\;mm{\times}1\;mm$) has resonant frequency at 910 MHz and bandwidth is 780 MHz ($540\;MHz{\sim}1320\;MHz$). The chip impedance is the 16 - $j131\;{\Omega}$ and the complex conjugate impedance of commercial chip has been used for tag antenna design. In order to evaluate effects of tag antenna for side view mirror's permittivity as well as car body(conductor), radiation pattern characteristics and readable range have been calculated and measured. The optimized position for a vehicle's RFID system has been observed in the inside of a side mirror and the calculated results show good agreement with the measured results.

• Journal of electromagnetic engineering and science
• /
• v.18 no.1
• /
• pp.7-12
• /
• 2018

This article proposes an ultrahigh frequency band radio frequency identification (RFID) tag antenna for drug runout management that can be used in hospitals. The RFID tag antenna is designed to function as a sensor that alerts drug runout when a drug inside a drip chamber is completely consumed but does not work when a drug remains inside a drop chamber. A previously proposed 915 MHz dipole antenna, is too large to be attached to the drip chamber of a feeding bag. Moreover, the length of the dipole (L) should be increased for conjugate matching with an RFID chip. Therefore, the dipole antenna is downsized so that it can be attached to the drip chamber through a fine meander line structure coupling with a corrugate meander line. A transparent cover is added to enhance the grip force between the designed antenna and the drip chamber and to enable detachment. The dimensions of the completed antenna structure attachable to a drip chamber are 32.59 mm (height) and 13.5 mm (width). The gain reduction due to the decreased antenna length is enhanced. The fabricated antenna shows an average omni-directional read range of 10.65 m on a horizontal plane and has the function of sensing the presence of a drug.

• Journal of Biosystems Engineering
• /
• v.34 no.6
• /
• pp.454-461
• /
• 2009

The purpose of this study is to analyze the RFID recognition performance by level of water. A 13.56 MHz RFID management system for packaged liquid food logistics is consisted of antenna, reader, passive type tags, and embedded controller. The tests were conducted at different level of water, distances between tag and antenna, and position of attached tags. To analyze the RFID recognition performance, maximum recognition distances for a container and recognition rates for a logistics made of 27 containers were measured and analyzed. The maximum recognition distance for a container was different depending on position of attached tags, and attached tag at upside position showed a good performance. But, the recognition rate of 27 containers showed a good ability for attached tags at front side position, 30~35 cm distance to antenna, and water level 1. Therefore, to manage packaged liquid food logistics using RFID system, position of attached tag, distances between tag and antenna, and level of water should be considered.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.102-107
• /
• 2011

The current blood control system is using barcode and scanning one by one to manage blood bags. To have better management and accuracy, an RFID BIS (blood information system) is implemented with an UHF RFID tag antenna using a reflecter for a blood bag has been used.. The UHF RFID tag for blood bag, attached on the high permittivity blood, is designed and fabricated. The tag antenna is optimized and fabricated with the simulation tests such as the existence and nonexistence of the reflector, various distance between the reflector and the dipole tag, the different widths of the reflector and the existence and nonexistence of the T-matching structure. The characteristics and the reading range patterns of the tag antennas are measured. The BIS is implemented with the new tag design.

• Journal of electromagnetic engineering and science
• /
• v.11 no.1
• /
• pp.1-4
• /
• 2011

In this letter, we propose a novel tag antenna that has low performance degradation with nearby dielectric material. We obtained a stable reading performance and a broad matching bandwidth on nearby dielectric materials by employing a T-matching network with thick line width and capacitively slot-loaded arms. We then built the proposed antenna and measured the tag sensitivity to examine the reading characteristics with nearby dielectric materials. The measured results clearly demonstrate stable tag sensitivity with various nearby dielectric materials, such as foam, acrylic-plastic, glass, and ceramic plates. To more closely observe the antenna characteristics with nearby dielectric materials, we also examined the impedance variation and surface current distribution with respect to the dielectric constant of nearby target objects, which ranged from $1{\times}{\varepsilon}_0$ to $16{\times}{\varepsilon}_0$.