• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1130-1137
• /
• 2006

One of the important performance issues in large-scale RFID systems is to resolve collisions among responses from RFID tags. Considering two do facto anti-collision solutions, namely the binary-tree splitting algorithm and the Slotted-Aloha algorithm, we propose to use multi-packet reception (MPR) capability to enhance the RFID tag reading rate (i.e., throughput). MPR allows an RFID reader to receive multiple reponses transmitted by tags at the same time. We analyze the effect of MPR capability in the above anti-collision algorithms, which is also validated by simulation. The analysis and simulation results show that RFID reader antenna design and signal separation techniques play an important role in improving RFID system performance with MPR capability.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.1
• /
• pp.63-69
• /
• 2014

RFIDs have not become widespread as expected partly due to the cost, size, read range, and reliability problems of tags. The success rate of reading must be improved in order for RFIDs to be widely adopted. Quality control of tags is crucial to meet this requirement. In this study, we designed and implemented a high-performance reader used in inspection equipment that conducts prior inspection of tags. To improve performance of the developed reader, the baseband modem and command processor (CP) were designed using H/W logic and implemented with FPGA. The inspection of small pitch inlays was made possible through the antenna shielding device and H/W command processor function. This equipment enables accurate evaluation of performance and identification of tags satisfying a given read range. By contributing to sort out defective tags, the results can ultimately lead to more stable RFID services.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5C
• /
• pp.429-436
• /
• 2012

In this paper, an RFID system for the automatic preparation system of positron emission tomography (PET) radiopharmaceuticals is developed. Since the preparation system uses radioactive isotope, the preparation system is generally placed in lead-shielded hot-cell. Disposable cassettes including tubes and valves are used in the preparation system, since they are easily contaminated by radioactivity during preparation of radiopharmaceuticals. Currently, a system for preventing re-use of the cassette and managing the information about the preparation precess and result independently from the PC which control the preparation system is highly required for preventing danger from the radiation accident. Since RFID can store and re-write relatively large amount of information, it is suitable for the purpose. However, it is hard to read multiple cassettes' information using antennas installed on the metallic surfaces with current RFID systems. For the problem, we improve RFID system in two directions. First, the interface of the RFID reader is changed then it is possible that multiple readers can be daisy-chained. Also, antenna is tuned while inserting in a metallic coated antenna case, then the effect from the metallic surface of the preparation system is minimized. The test result using the developed system shows that the developed RFID system can read multiple tags using the antennas which are attached on the metallic surface.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.119-123
• /
• 2006

Finding out the exact location of survivors in short period of time is critical to conduct rescue activity successfully in oceans. Current technology with natural circumstances limits the activity that our efforts come along. R&D Center housed at Korea Coast Guard (KCG) has developed the system named "RFID for Life jacket" which enables us to access the location of persons under distressed situation. The RFID has been widely known as state-of-art technology to monitor the location even in inland or in ocean. Composed of tag, antenna. reader and middleware, RFID is attached to attached to a life jacket that people usually wears in recreational activity. By conducting experiments in pilot-scale several times, successful results showing 96.7% of transmission within 3.5km in diameter were produced. This study explains the routes of experiments to reach the goal and expected results coming from this accomplishments.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06d
• /
• pp.408-411
• /
• 2010

본 논문에서는 의약품, 음료수병 등 액체용기에 부착이 가능하며, 주변 유전체에 의한 성능열화가 적고 소형으로 바코드를 대신하여 용기에 부착이 가능한 플렉시블 RFID 특수태그 안테나를 제안하였다. 제안된 태그 안테나는 PET 기판 위에 미앤더 기법으로 제작되어 제작 및 대량 생산에 용이하며, 범용 RFID의 사용주파수 (860~960MHz)를 만족시키고, 주변 유전물의 영향으로 인한 성능변화를 최소화할 수 있도록 설계하였다. 제안된 태그 안테나는 본체 중앙부에 T 정합회로를 사용하고 미앤더 구조와 직선 구조의 보조선로 2개를 본체 상단에 삽입하여, 캐패시티브 결합을 이용해 태그칩과의 임피던스 공액정합이 쉽게 이루어지도록 하였다. 또한 2개의 보조선로가 각각 다른 부착물체의 유전율에 상호 보완적으로 전류를 유기시 키도록 하여 주변 유전 물질의 영향에 의한 반사손실을 만족하도록 하였다. 본 태그의 성능은 송신출력 20dBm, 안테나 이득 6dBi인 리더 안테나를 사용하였을 때 자유공간에서는 3.5m, 유리 부착 시 2.61m, 액체가 든 유리병 부착 시 2.51m 의 인식거리 성능을 보였다.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.1
• /
• pp.85-96
• /
• 2011

The access monitoring and control system of vehicles involved in construction logistics has been evolved from paper-based through bar code-based and to RFID-based management with pursuing automatic data collection and management. However, existing management methods have a limit that they still need manpower allocation for access control of vehicles. Therefore this research has proposed an framework that includes devices and an information system for effective and efficient data collection for access control of vehicles for construction logistics. And the proposed framework has been verified through a laboratory test using a prototype system developed in this research. It is expected that the installation methods of RFID antenna and tag for the framework could be applied to not only the access control of construction site but also various RFID applications at construction sites.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.8 s.111
• /
• pp.753-759
• /
• 2006

Generally, the Wheeler cap method is used to measure the efficiency of small antennas. This method often gives an unreliable efficiency when the antenna has a complicated operating principle. However, if the high-order circuit model which more closely represents the input impedance of the antenna is used in Wheeler cap method, then more accurate efficiency can be achieved. In this paper, we propose a novel method that can build the high-order circuit model using transformer circuits with the genetic algorithm(GA). To efficiently reduce the searching space in the GA and improve the convergence of the GA process, we suggest a novel scheme that finds appropriate initial values. Finally we verify the proposed method by measuring the efficiency of some passive RFID tag antennas.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.113-120
• /
• 2009

Through the automatic sensing of the environment, USN technology can give the best services. In this work, we have developed an active RFID system and examined its performance. By implementing it into water quality sensors, we constructed a system that can detect diverse indoor/outdoor environment and provide information about the pollution level obtained from the temperature and PH sensors. Our RF system had an internal Print-on-PCB antenna for the miniaturization of the tag. We used a RF transceiver CC2510 chipset of TI company to realize the active RFID function. By using RSSI constants obtained, we performed the evaluation of real time location accuracy with a software written in Labview. Among 10 arbitrary locations, we obtained average measurement errors of 1.69 m in x axis and 1.66 m in y axis. This technology can be applied to logistics, environmental monitoring, prevention of missing children and various applications.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.329-336
• /
• 2014

Pipe spool is the most important element of plant equipment in plant construction site. Currently, the plant construction site manage the pipe spool location and usage history by handwriting. Frequently, the pipe spool is moved to unpredictable places by field workers in many construction sites and in cases like this, the pipe stool is replaced with another similar pipe spool. Since it's hard to determine the exact location of some of the pipe spools, it takes unnecessary time and labour to find the missing pipe spools, which proves that stock management is not under control. The purpose of our system is to make the identification of real-time location of the field pipes possible by attaching UHF RFID tags to the pipe spool, which will be used to connect with UHF RFID reader and antenna on vehicles. A field test conducted by the proposed system resulted in the success rate of 98% and the missing 2% was recuperated by hands-on correction, which proved that stock management through the proposed method can be 100% effective. The proposed system is expected to reduce labour costs and make stock control of assets possible, as well as applicable to similar stock management environments.

• Journal of KIISE:Software and Applications
• /
• v.33 no.12
• /
• pp.1022-1030
• /
• 2006

The location awareness is an important part of many ubiquitous computing systems, but a perfect location system does not exist yet in spite of many researches. Among various location tracking systems, we choose the RFID system due to its wide applications. However, the sensed RSSI signal is too sensitive to the direction of a RFID reader antenna, the orientation of a RFID tag, the human interference, and the propagation media situation. So, the existing location tracking method in spite of using the particle filter is not working well. To overcome this shortcoming, we suggest a robust location tracking method with a double layered structure, where the first layer coarsely estimates a tag's location in the block level using a regression technique or the SVM classifier and the second layer precisely computes the tag's location, velocity and direction using the particle filter technique. Its layered structure improves the location tracking performance by restricting the moving degree of hidden variables. Many extensive experiments show that the proposed location tracking method is so precise and robust to be a good choice for implementing the location estimation of a person or an object in the ubiquitous computing. We also validate the usefulness of the proposed location tracking method by implementing it for a real-time people monitoring system in a noisy and complicate workplace.