• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2006년도 추계학술발표대회 및 제11회 신소재 심포지엄
• /
• pp.24.2-24.2
• /
• 2006

• 반도체디스플레이기술학회지
• /
• 제9권1호
• /
• pp.29-33
• /
• 2010

Recently, the growth of ZnO thin film on glass substrate has been investigated extensively for transparent thin film transistor. We have studied the phase transition of ZnO thin films from metal to semiconductor by changing RF power in the deposition process by RF magnetron sputtering system. The structural, electric, and optical properties of the ZnO thin films were investigated. The film deposited with 75 watt of RF power showed n-type semiconductor characteristic having suitable resistivity $-3.56\;{\times}\;10^{+1}\;{\Omega}cm$, carrier concentration $-2.8\;{\times}\;10^{17}\;cm^{-3}$, and mobility $-0.613\;cm^2V^{-1}s^{-1}$ while other films by 25, 50, 100 watt of RF power closed to metallic films. From the surface analysis (AFM), the number of crystal grain of ZnO thin film increased as RF power increased. The transmittance of the film was over 88% in the visible region regardless of the change in RF power.

• 한국정보전자통신기술학회논문지
• /
• 제11권6호
• /
• pp.772-777
• /
• 2018

본 논문은 RF 마크네트론 스퍼터링 장비를 이용하여 ITO 유리에 N-type 및 P-type을 증착하였다. N-Type의 오믹접촉은 모든 조건에서 잘 되었다. 면저항은 RF Power가 증가할수록 면 저항이 증가되는 현상을 나타내었다. 증착한 박막의 표면을 분석해 본 결과, RF Power가 250W이고, 기판온도가 $250^{\circ}C$의 조건에서 입자가 균일하고 크기가 일정한 박막이 증착 된 것으로 측정되었다. P-Type은 모든 조건에서 오믹접촉이 잘 이루어졌으며 면저항은 RF Power가 증가할수록 증가되는 것으로 나타내었다. RF Power가 증가할수록 두께가 증가하고 안정화 된 것을 알 수가 있었다. PN junction 박막과 NP junction 박막은 스퍼터링 시간이 증가할수록 박막의 두께가 증가하고 안정화 된 것을 알 수가 있었다. PN junction 박막을 제작한 결과, 변환효율은 스퍼터링 시간이 10분일 때 0.2로 가장 우수하였다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 추계 기술심포지움
• /
• pp.171-177
• /
• 2001

The adhesion enhancement from inserting a RF bias-sputtered Cr layer between Cu and polyimide (PI) has been studied. The RF bias power applied in this study was ranged from 0 to 400 W. Without the RF bias, the peel strength, which measures the adhesion strength, was nearly o g/mm. As the RF power was increased, the peel strength rose up to ~130 g/mm at 200 W, which remained constant with further increase of the RF bias power. Cross-sectional transmission electron microscopy(TEM) was used to investigate the interfacial reaction between the Cr film and PI substrate during the bias sputtering. The Cr/PI interface without the application of RF dais showed a clean, sharp interface while the RF raised Cr/PI interface had about 10~30 nm thick atomistically mixed interlayer between the metal film and PI substrate. This interlayer appeared to have resulted from the implantation of high energy adatoms during the RF bias sputtering of Cr film. This mixed layer serves as an interlocking layer, which enhances adhesion between the metal and PI layers.

• Applied Science and Convergence Technology
• /
• 제24권6호
• /
• pp.242-244
• /
• 2015

ZnO:Ga thin films were deposited by RF magnetron sputtering technique from ZnO (3 wt.% $Ga_2O_3$) target onto glass substrates under various RF power. The influence of RF power on the structural, electrical, and optical properties of ZnO:Ga thin films was investigated by X-ray diffraction, atomic force microscopy, Hall method and optical transmission spectroscopy. As the RF power increases from 50 to 110W, the crystallinity is deteriorated, the root main square surface roughness is decreased and the sheet resistance is increased. The increase of sheet resistance is caused by decreasing carrier concentration due to interstitial Ga ion. All films are transparent up to 80% in the visible wavelength range and the adsorption edge is a red-shift with increasing RF power.

• Applied Science and Convergence Technology
• /
• 제27권5호
• /
• pp.105-108
• /
• 2018

Transparent $TiO_2$ nanotube arrays are successfully prepared by a two-step approach involving electrochemical anodization and RF magnetron sputtering. First, a Ti film is deposited on an FTO substrate by RF magnetron sputtering at room temperature. The morphologies of the Ti film are controlled by the working distance, Ar flow, and DC power. Second, an anodization treatment is electrochemically performed for the formation of nanotube arrays from the deposited Ti film, followed by post-annealing treatment in air for the formation of $TiO_2$ crystallization. The back side of the crystallized $TiO_2$ nanotube arrays is illuminated with solar light to characterize the photoelectrochemical reaction, and their photoelectrochemical properties are investigated. This work provides information on application of a thin film deposited by RF sputtering in the field of photoelectrochemical water splitting.

• 한국전기전자재료학회논문지
• /
• 제28권11호
• /
• pp.694-697
• /
• 2015

We investigated the characterizations of carbon films fabricated by dual magnetron sputtering under various RF powers for the improvement of physical properties in carbon fiber (CF). All sputtered carbon films exhibited amorphous structure, regardless of RF powers, resulting in uniform and smooth surfaces. The hardness and elastic modulus are increased with the increase of RF power, and the adhesion and friction properties of carbon films were improved with the increase of RF power. In the results, The increase of RF power in the sputtering method improved tribological properties of the carbon films, and these attributes can be expected to improve the physical properties of the carbon fiber reinforcement plastics.

• 한국결정성장학회지
• /
• 제14권5호
• /
• pp.215-219
• /
• 2004

ZnO 에피박막을 사파이어 기판의 (0001)면 상에 RF magnetron sputtering 법으로 성장하였다. 박막의 성장속도는 약 0.1~0.2$\mu\textrm{m}$/hr 였으며, 기판온도가 $600^{\circ}C$일 때, 약 400~500nm두께의 단결정상의 박막을 성장할 수 있었다. 성장된 단결정상 박막에 대하여 XRD분석과 TEM을 이용하여 박막의 품질과 미세구조를 평가하였다.

• 한국세라믹학회지
• /
• 제44권10호
• /
• pp.585-588
• /
• 2007

Silicon nitride films for an anti-reflection coating were deposited on silicon via RF magnetron sputtering using a $Si_3N4$ target. The best result was obtained at the sputtering condition of 340 W RF power, 5 mtorr Ar atmosphere, $100^{\circ}C$ substrate temperature. The films showed 7.9% reflectance minimum with 2.35 refractive index. 0.21 absorption coefficient at 66.6 nm thickness. The surface morphology showed a smooth and dense film with good adhesion to silicon surface.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권7호
• /
• pp.727-732
• /
• 1996

In the present paper, the Cu films 4.mu.m thick were deposited by RF magnetron sputtering method on Si wafer. The Cu films deposited at a condition of 100W, 10mtorr exhibited a low electrical resistivity of 2.3.mu..ohm..cm and densed microstructure, poor adhesion. The Cu films grown by 200W, 20mtorr showed a good adhesion property and higher electrical resistivity of 7.mu..ohm..cm because of porous columnar microstructure. Therefore, The Cu films were deposited by double layer deposition method using RF magnetron sputtering on Si wafer. The dependence of the electrical resistivity, adhesion, and reflectance in the CU films [C $U_{4-d}$(low resistivity) / C $U_{d}$(high adhesion) / Si-wafer] on the thickness of d has been investigated. The films formed with this deposition methods had the low electrical resistivity of about 2.6.mu..ohm..cm and high adhesion of about 700g/cm.m.m.