• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.28-28
• /
• 2010

This study realized low-temperature crystallization process of the $Ba_{0.6}Sr_{0.4}TiO_3$ (BST) thin films without thermal damage of substrate using excimer laser annealing (ELA) and structural and electrical characteristics were investigated. The amorphous BST thin films were prepared on Pt/Ti/$SiO_2$/Si substrate by sol-gel method at $250^{\circ}C$. The ELA was carried out using KrF excimer laser which provided excitation wavelength of 248 nm. The beam homogenizing system was used in order to homogenize beam shape of Gaussian fit. The XRD and SEM were used to analyze structural characteristics and the microwave capacitance, dielectric loss and tunability of the BST films were measured by a symmetrical stripline resonator method with shorted end. Consequently, the crystallinity of BST thin films were improved after ELA process and RF tunable capacitor was demonstrated at low temperature below $300^{\circ}C$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.859-862
• /
• 2003

Well-aligned multiwall carbon nanotubes (MWCNTs) were prepared at low temperature of 400 $^{\circ}C$ by utilizing a radio frequency plasma-enhanced chemical vapor deposition (rf-PECVD) system. The MWCNTs were treated by an external rf plasma source and an ultra-violet laser in order to modify structural defect of carbon nanotube and to ablate possible contamination on carbon nanotube surface. Structural properties of carbon nanotubes were investigated by using a scanning electron microscopy (SEM), Raman spectroscopy, Fourier transformer Infrared spectroscopy (FTIR) and transmission electron microscope (TEM). In addition, the emission properties of the MWNTs were measured for the application of field emission display (FED) in near future. Various post treatments were found to improve the field emission property of carbon nanotubes.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.296-299
• /
• 2008

최근 통신시스템과 핸드폰, PDA등의 통신기기들의 발전에 따라 사용자들은 높은 데이터 전송률과 고속의 통신서비스를 요구하고 있다. 이러한 상황에서 유 무선 통합 시스템인 Radio-over-Fiber(RoF) 시스템은 그 대안으로 대두되고 있다. 본 논문에서는 광전자소자를 선 왜곡 방식에 적용하여 광 송신기의 선형성을 향상시키는 방법을 제안하였다. 선 왜곡 방식은 두 개의 루프로 구성되어 있으며, 광 부품인 레이저 다이오드와 포토 다이오드 그리고 RF 부품인 위상변위기, 감쇄기, RF 결합/분배기, RF 증폭기를 사용하였다. 메인 루프에서 주 레이저 다이오드의 비선형성에 의해 발생된 왜곡신호성분은 보조 루프에서 부 레이저 다이오드를 이용하여 추출된 선 왜곡신호에 의해서 제거된다. 제안된 선형화 기법을 적용하여 2.4 GHz에서 선형화 기법을 적용하기 전보다 3차 상호변조 왜곡성분이 약 30dB 향상된 결과를 얻었다.

• 한국정보통신학회논문지
• /
• 제17권8호
• /
• pp.1968-1973
• /
• 2013

전계 흡수 변조기가 집적된 이중 전극 분포 궤환형 레이저를 사용하여 광신호의 변조 응답 향상을 실현하였다. 이 중 전극 구조의 분포 궤환형 반도체 레이저는 자려 펄스 발진 현상으로 인해 수 기가 헤르쯔의 모드 간격을 가진 다중 광모드 발진 현상을 보인다. 이 현상을 이용하여 RF 신호에 대한 광원의 변조 특성을 6 GHz 변조 신호에 대하여 약 20 dB 향상 시켰으며, 이러한 변조 성능 향상에 대하여 7 GHz의 주파수 가변 영역을 얻었다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권4호
• /
• pp.107-112
• /
• 2001

Laser Thomson scattering measurements of electrom temperature and density in a neutral loop discharge (NLD) plasma were performed in order to reveal the electron behavior around the neutral loop (NL). The experimental results were examined by using a simulation model that included effects of a three dimensional electromagnetic field with spatial decay of the RF electric field, and the limitation of the spatial extent of the electron motion and collision effect. From the experiments and modeling of the electron behavior, it was found that NLD plasma posses the electron temeprature $T_{e}$ and density ne peaks around the NL is essential for the formation of plasma. Also, the optimum condition of plasma production could be simply estimated by the calculation of $U_{av}$ and $F_{0}$././.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 추계학술발표대회 개요집
• /
• pp.73-75
• /
• 2004

The purpose of this study is to optimize Nd:YAG laser welding parameters to seaz a Rf source into a Ti micro capsule. Ti tube ends can be sealed as some length of ぉbe end is melted and coalesced. The exact control of the melted length is the most important to get sound sealing. The Nozzle type, tube rotating speed, tilt angle, focal position, pumping voltage, pulse frequency and pulse width were selected as the Nd:YAG laser welding Parameters. These Parameters were optimized by the Taguchi experimental method using 115 orthogonal array. Appearance and cross section of the seated tube ends were examined by SEM.

• 제어로봇시스템학회논문지
• /
• 제14권6호
• /
• pp.558-563
• /
• 2008

Optical axis misalignment, which represents the position deviation of the objective lens from the optical axis, is an inevitable assembly error in an optical pick-up. Since the laser power intensity varies with respect to the distance from the optical axis, the misalignment leads to variation of the laser spot power intensity, which is one of the critical factors increasing data bit-error-rate in optical disc drives. In this paper, an auto-adjustment scheme for optical axis alignment is proposed to eliminate the undesirable variation of the laser spot power intensity in optical disc drives. An envelope of the data RF signal is extracted and utilized to detect the optical axis misalignment. Then an adjustment input is added to the driving input of the tracking actuator to shift the objective lens to the optical axis. Finally, the feasibility is verified by experiments.

• 조명전기설비학회논문지
• /
• 제28권7호
• /
• pp.13-18
• /
• 2014

On 250.199nm uv-line, witch has the potential to emit as a laser line, from a ccrf-excited He-Zn discharge with overlapped DC was carried out optimization of the discharge parameters and measurement of the optical gain. In this study the optical gain of the 250.199nm uv-line has been optained 4% for the first time. At a rf-power of 400W with the frequency 13.56MHz the optimal He-pressure indicated 2kPa.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 학술대회 및 기술세미나 논문집 디스플레이 광소자
• /
• pp.62-63
• /
• 2006

In this paper, the characteristics of polycrystalline silicon thin-film transistors (poly-Si TFTs) fabricated on polymer substrates are investigated. The a-Si films was laser annealed by using a XeCl excimer laser and a four-mask-processed poly-Si TFT was fabricated with fully self-aligned top gate structure. The fabricated nMOS TFT showed field-effect mobility of $30cm2/V{\cdot}s$, on/off ratio of 105 and threshold voltage of 5 V.

• 한국광학회지
• /
• 제3권2호
• /
• pp.105-110
• /
• 1992

광자기 기록 박막의 자기 광학효과에 의한 미소 편광 회전각을 축정하기 위하여 편광 변조 방법을 이용하였다. 편광 변조 방법은 Faraday 회전자로 레이저광의 편광을 변조하고 phase sensitive detection방법을 써서 변조된 신호만을 선택적으로 검출하는 것이다. 본 실험에서는 진공증착법으로 제작된 TbFeCo박막과 RF 스퍼터링으로 제작된 iron garnet 다결정 박막의 자기 Kerr 회전 및 Faraday 회전 이력곡선을 이 방법으로 조사하였다. 그 결과 $0.25^{\circ}$정도의 미소한 회전각을 측정하였으며 특히 longitudinal Kerr 회전의 경우 $2.5\times10^{-3^\circ}$정도의 매우 작은 회전각도 측정할 수 있었다.