• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2705-2710
• /
• 2011

With the rapid development of information and communication technology, CBTC system based on the wireless communication is widely applied in the railway signal system recently. CBTC system has advantages of lower installation space and maintenance fee than existing systems and the increase of transportation capacity and improvement of operating efficiency etc. due to the short headway. Based on the continuous wireless data communication between onboard and wayside equipment, CBTC system not only locates the train and transmits the information required for the train control, but also implements the moving block function by calculating the brake curves continuously according to distance from the preceding train. CBTC system can use either inductive loop (IL-CBTC) or radio frequency transmissions (RF-CBTC). In this paper, we propose RF-CBTC system architecture based on the functional modules, in which the CAN bus network is applied for the interfaces between the modules.

• 한국ITS학회:학술대회논문집
• /
• 2008.11a
• /
• pp.548-550
• /
• 2008

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3104-3110
• /
• 2011

This paper describes how to ensure safety of train by guaranteeing stable and continuous communication in RF-CBTC. CBTC System uses the wireless communication between onboard and wayside so that safety of wireless communication is the most important. Losing the position of train causes vital problem of train service. By losing the position of train, the other trains are blocked in the block and the train move by emergency mode so headway and safety cannot guaranteed. Therefore, safety is ensured by redundancy of wireless equipment. One of the ways to make redundancy is redundancy of equipment. However, the redundancy of equipment spends a lot of money to avoid interference in limited place like underground. Continuous communication is guaranteed by means of redundancy of wireless communication coverage to solve the problems even though one of the equipment is broken.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.145-153
• /
• 2011

In the system necessary for safety such as the train control system, to make train control information be sent correctly is very important to enable organic movement between trains. In the case of the system such as RF-CBTC (Radio Frequency Communication Based Train Control) the control related information is sent through wireless transmission between on-board system of a train and wayside transmitter. The wayside transmitter collects the running information such as location, velocity from the on-board system and operates the optimizing control by sending the control information such as the target, limited velocity to the on-board system. But, when the communication disconnect or train failure, the critical hazard such as train collision or derailment may be possible because the RF-CBTC depends on the information through wireless communication. This paper discribes of performing Fall-Back system to detect train position in the case of rail break or communication failure to avoid train accident and allows train to be operated safely. It can be implemented with ATP function through track circuits using active-type transformers and axle counters, and allows train to be operated manually in emergency status.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.4
• /
• pp.455-468
• /
• 2014

This paper presents seamless hand off implementation suggesting algorithm and Measuring /testing at the tunnel environment in order to derive the ideal value of wireless data transmission in RF-CBTC train control system modeled by Shinbundang Operation System. In addition, it proposes the ideal value(-57dB) for reducing the re-transmission or frequency interference rate and demonstrates frequency optimization which enables highly reliable data communication in Train control system using wireless communications. Based on these result, Shinbundang phase 2 plan to apply to this system.

• International Journal of Railway
• /
• v.3 no.2
• /
• pp.39-45
• /
• 2010

The RF-CBTC (Radio Frequency-Communication Based Train Control) System is a communication system in railroad systems. The communication method of RF-CBTC system is the wireless between the wayside device and on-board device. The wayside device collects its location and speed from each train and transmits the distance from the forwarding train to the speed-limit position to it. The on-board device controlling device controls the speed optimum for the train. In the case of the RF-CBTC system used in Korea, transmission frequency is 2.4 [GHz]. It is the range of ISM(Industrial Scientific and Medical equipment) band and transmission of voice and data is performed by CDMA (Code Division Multiple Access) method. So noises are made in the AWGN (Additive White Gaussian Noise) and fading environment. Currently, the SNR (Signal to Noise Ratio) is about 20 [dB], so due to bit errors made by noises, transmission of reliable information to the train is not easy. Also, in the case that two tracks are put to a single direction, it is needed that two trains transmit reliable voice and data to a wayside device. But, by noises, it is not easy that just a train transmits reliable information. In this paper, we estimated the BER (Bit Error Rate) related to the SNR of voice and data transmission in the environment such as AWGN and fading from the RF-CBTC system using the CDMA method. Also, we supposed the SNR which is required to meet the BER standard for voice and data transmission. By increasing the processing gain that is a ratio of chip transmission to voice and data transmission, we made possible voice and data transmission from maximally two trains to a wayside device, and demonstrated it by using Matlab program.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.814-817
• /
• 2003

Assuming that life of urban transit signalling is about 20 years with the flow of technology development, Seoul urban transit will be required to prepare for improvement soon. The highly developed countries preceding several levels rather than Korea are faced with commercial service which uses RF, ATC and ATO in Train Control System. European highly developed countries in the field of railroad have been progressing standardization and technology development of signalling associated with related manufacturers for direct operation between nations. For that, a effective train control system with radio beyond control levels by the existing wayside-onboard communication is in a developed and used stage. The systems which advanced countries have been progressing seem to be applied to domestic within 5 years from now. At present, there are no countries using CBTC for service throughout the world. So, this is investigated to focus on the routes ready to be installed with completed CBTC and trying to introduce the technology. Especially, considerations for economic aspect are mainly reviewed about controlling ability of headway, flexibility, extension aspect and construction cost on the basis of paper examined in NYCT.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.152-161
• /
• 2017

The CBTC(Communication based Train Control) system employed on 2.4GHz ISM band adopt the IEEE802.11.x standard. Therefor communication time delay, distortion and data losses will be produced. To overcome these problems, CPSK(Continuous Phase shift keying) modulated DS/SS(Direct Sequence Spread Spectrum) transmitter with 908MHz carrier frequency is proposed. Through the eye diagram and scatter diagram the performance is analysed. And the phase noise characteristic of the local oscillator is measured about 60dBc/Hz, this means that the phase noise performance is very good compared to the signal. Reference frequency suppression of the 2nd local oscillator is 50dB below compared to the signal. Through the polarities of the complementary signal equally probable, the line spectrum of the output spectrum is eliminated. The nonlinear effects which introduce the spectral spreading or spectral regeneration is reduced remarkably.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1370-1378
• /
• 2008

In the system necessary for safety such as the train control system, to make train control information be sent correctly is very important. In the case of the system such as RF-CBTC(Radio Frequency-Communication Based Train Control), sometimes failure in correctness of train controlling information may happen because the information is sent throughout wireless transmission between on-board system of a train and wayside transmitter, and then, it is exposed to noises. Of RF-channel interference, there are various forms. Under the environment of mobile telecommunications, adjacent-channel interference and Co-channel interference are in trouble, and under the environment of the wireless LAN, inter-symbol interference is in trouble. Also, the system of the cellular CDMA mobile telecommunication is affected on the RF-channel interference such as Doppler effect, multi-cell interference, and other users' intervention. In this paper, we analyzed the effect of the train control information related to fading, intervention and other noises made in the underground interval and explained the transmission characteristics numerically. Furthermore, we calculated the mean of the error terms by increasing users in the system of the cellular CDMA. As the method for decrease the error term of sent information, we represented the way adjusting the arrangement of antennas, and we did the model related to the system of RF-CBTC in which the location of an antenna is calculated with really measured value of the transmission characteristics and the way confirming reliability of the wireless transmission.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.379-381
• /
• 2003

국내 전파법을 바탕으로 경량전철신호제어시스템용 무선통신장치와 무선데이터통신시스템간 간섭거리를 계산하였다. 무선데이터통신시스템이 실내에 설치되어 있는 경우 경량전철신호제어시스템용 무선통신장치를 사용하는 것이 문제없음을 화인하였다. 또한 실외의 경우에도 큰 문제없이 신호제어시스템용 분석장치를 사용할 수 있음을 확인하였다.