• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2439-2441
• /
• 1998

In this research, the sensor and control system for self detecting masticatory muscle relaxation appliances. A strain gauge is used to measure a strength of tooth clenching force. A bridge circuit and voltage amplifier is designed to amplify measured signals and RF transmitter and receiver is also designed to communicate inner and outer mouth device. The experiments are performed to show the effectiveness of designed system.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1963-1965
• /
• 2000

This paper deals with a problem of detecting the inner corrosion of the ACSR(Aluminum Conductor Steel Reinforced) power lines using a detector which consists of an ECT(Eddy Current Test) sensor, a constant current service, a signal processing unit, and a RF transmitter/receiver unit. The detector runs on the ACSR transmission line and inspects the corrosion of the conductor using the technic of the nondestructive eddy current test. The experimental result shows this detector can efficiently find the zinc loss in ACSR power lines.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2318-2320
• /
• 2005

In this paper, a low noise amplifier(LNA) in a receiver of a Low Noise Block Down Converter (LNB) for direct broadcasting service(DBS) is implemented using GaAs HEMT. The LNA is designed for the bandwidth of 11.7GHz-12.2GHz. The 2stage-LNA consists of a input matching circuit, a output matching circuit, DC-blocks and RF-chokes. The result of a simulation of the LNA using Advanced Design System(ADS) shows the noise figure less than 1.4dB, the gain greater than 23dB and the flatness of 1dB in the bandwidth of 11.7 to 12.2GHz.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1091-1096
• /
• 2011

The main factors of radar signals used in electronic warfare are Radio Frequency(RF), Pulse Repetition Interval(PRI), Pulse Width(PW), Scan Parameter(SP) and so on. This radar signals may have some important information for the electronic warfare. So, there is a necessity for making a threat database to decide whether the radar signal is a threat or not. When the electronic support system collects some threat radar signals, it needs the search band to control the receivers and filter banks of the system. In this paper we propose search band implementation considering the type and center frequency of the receivers of the electronic support system.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.1
• /
• pp.67-76
• /
• 2002

This thesis aims at the study of the receiving part of wireless modem for Mobitex, which are designed for two way massage services by using the network of wireless packet. This receiving part has the features of GMSK demodulation by using Gaussian filter, which has the co-amplitude in a better condition and narrowness bandwidth and high performance in BER, compared with existing MSK modulation. In case of BT=0.3, we designed this receiving part to reduce RF output power spectrum at received data of symbol demodulation and avoid inter symbol interference(ISI) so that we can apply this part to Mobitex network which are currently in service for wireless modem in domestic.

• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.76-85
• /
• 2011

In this paper, we analysed RSS characteristics by external factors and presented an efficient algorithm for real-time location tracking and its hardware system. The proposed algorithm enhanced the ranging accuracy using Kalman Filter based on the RSS DB. The location tracking system that consists of the tag, AP(Access Point), a data collector(Data Receiver) with IEEE 802.15.4(ZigBee) network environment, and location tracking application that reveal locations of each tag is implemented for the test environment. The location tracking system presented in this paper is implemented with MSP430 microprocessor manufactured by TI(Texas Instrument), CC2420 RF chipset and the location tracking application. With the results of the experiment, the proposed algorithm and the system can achieve the efficiency and the accuracy of location tracking with the average error of 19.12cm, and its standard deviation of 5.31cm in outdoor circumstance. Also, the experimental result shows that exact tracking of position in indoor circumstance cannot achieve because of vulnerable RSS with external circumstance.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.213-219
• /
• 2004

In this paper, a LNA(Low Noise Amplifier) has been developed, which is operating at L-band i.e., 1452∼1492 MHz for satellite DAB(Digital Audio Brcadcasting) receiver. The LNA is designed to improve input and output reflection coefficient and VSWR(Voltage Standing Wave Ratio) by balanced amplifier. The LNA consists of low noise amplification stage and gain amplification stage, which make a using of GaAs FET ATF-10136 and VNA-25 respectively, and is fabricated by hybrid method. To supply most suitable voltage and current, active bias circuit is designed Active biasing offers the advantage that variations in $V_P$ and $I_{DSS}$ will not necessitate a change in either the source or drain resistor value for a given bias condition. The active bias network automatically sets $V_{gs}$ for the desired drain voltage and drain current. The LNA is fabricated on FR-4 substrate with RF circuit and bias circuit, and integrated in aluminum housing. As a reults, the characteristics of the LNA implemented more than 32 dB in gain. 0.2 dB in gain flatness. lower than 0.95 dB in noise figure, 1.28 and 1.43 each input and output VSWR, and -13 dBm in $P_{1dB}$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.10
• /
• pp.769-778
• /
• 2017

In this paper, a self-interference signal cancellation(SIC) circult for In-band Full-Duplex has been developed and tested in RF/analog region. By use of this SIC circuit, a FM two-way radio has been developed working at FRS(Family Radio Service) band. The two-way radio device is transmitting the FM modulated signal and demodulating the wanted FM signal at the same time. A circulator is used to enable a single antenna to transmit and receive simuultaenously. The receiver circuit needs to cancel out the self-interference signal due to the transmit signal. A vector modulator(VM) is used to control the phase and magnitude of the esitmated signal. And in-phase and quadrature correlators are used to figure out the optimal coefficients of the VM to remove the self-interference signal according to the change of channel environment. In this work, SA58646 has been used as the FM transceiver, and the system is tested with a frequency of 465 MHz and a bandwidth of 12.5 kHz FM signal. The output power is 17.2 dBm at the antenna port, and the self intererence signal level is measured -49.2 dBm at the receiver end. Therefore the SIC level is measured by 66.4 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.389-398
• /
• 2011

In this paper, the design and fabrication of a transmit/receive(T/R) module for Ka-band phased array radar is presented. A 5bit digital phase shifter and digital attenuator were used in common for both transmitter and receiver considering unique Ka-band characteristic. The circulator was excluded in the T/R module and was placed outside T/R module. The transmitting power per element antenna is designed to be about 1 W and the noise figure is designed to be below 8 dB. The designed T/R module RF part has a compact size of $5\;mm{\times}4\;mm{\times}57\;mm$. In order to implement the T/R module, MMICs used in T/R module was separately assessed before assembly of the designed T/R module. The transmitter of the fabricated T/R module shows about 1 W at 5 dBm unit module input power and the receiver shows a gain of about 20 dB and a noise figure of below 8 dB as expected in the design stage.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.42-48
• /
• 2008

Next generation wireless communication systems require RF transceivers that enable multiband/multimode operations. Polar transmitters are known as good candidates for high data rate systems such as EDGE (Enhanced Data Rates for GSM Evolution), WCDMA (Wideband Code Division Multiple Access), and WLAN (Wireless Local Area Network) because they can obtain high efficiency by using efficient switched-mode RF power amplifiers. In this paper, we investigate the performance of a simple peak windowing scheme for the OFDM (Orthogonal frequency Division Multiplexing) polar transmitter, which requires no change of a receiver structure or no additional information transmission. The approach we employed is to apply the peak windowing scheme to the amplitude modulated signals of the polar transmitter to reduce the PAPR (Peak-to-Average Power Ratio). The BER (Bit Error Rate) and EVM (Error Vector Magnitude) performances are measured for various window types and lengths. The simulation results demonstrate that the proposed algorithm mitigates out-of-band distortion introduced by clipping along with PAPR reduction.