• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.99-103
• /
• 2000

최근 많은 분야에서 사용피고 있는 소형 전광판을 이용하여 원거리에서도 메시지 전달이 가능한 광고용 전광판을 제작하였다. FSK Modem과 RF-Module을 이용하여 실시간으로 광고의 내용을 바꾸는 것을 원칙으로 구현하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.928-938
• /
• 1994

We designed and implemented (3.3) tap Decision Feedback Equalizer using Zero Forcing algorithm for 64 QAM RF MODEM (155Mbps) in SDH STM-1, Before we designed DFE, simulate 11 tap linear equalizer and (3.3) tap DFE. Then we get results that performance of DFE is better than linear equalizer by 5dB in fading. Practically, implemented DFE have good performance equalizing signal in 20dB fading depth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.624-632
• /
• 1994

In this paper, we implement modulator of 155Mbps 64QAM RF MODEM, CCITT G. 707 SDH(Synchronous Digital Hierachy) 1 level, for DMR(DIgital Microwave Radio) STM-1 transmission, PSF(Pulse Shaping Filter) plays an important role to analyze modulator. We use 7 orders elliptic filter instead of Chebychev filter(roll-off facter a=0.5)in this paper. we obtain that roll-off factor, a is 0.33, group delay is less than 10nsec using this filter. Also we get -20dBm output level after passing the PSF, and 0dBm output level after passing the IF amplifier.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.94.4-94
• /
• 2001

An acoustic ranging system was applied for reckoning the location of an agricultural vehicle in the field. The system has a number of fixed stations and a mobile station such as an agricultural vehicle. The mobile station comprises a radio frequency modulator-demodulator (RF MODEM), a buzzer, and a personal computer. The fixed station comprises an (RF MODEM), a microphone, an amplifier for the microphone, and a personal computer with a soundboard. The mobile station transmits a 7-bit ASCII code and, activates the buzzer simultaneously. The propagation delay time at the fixed station is caused by the difference ...

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.5
• /
• pp.921-927
• /
• 2006

The current DGPS technique is many problems that is permission of radio station using RF Wireless Modem, that is influence of geographic obstacle using radio wave, that is frequency interference, that is finiteness of frequency resources. In this paper, we are solved many elements, IM(Interface Module) replaces RF Wireless Modem, we suggest transmission technique of correction message using mobile phone, we researched Interface Module development which is linkage of DGPS receiver and mobile phone. IM can transmit correction message passing RS-232 port and modem communication control. IM of base station is initialized RS-232 port and modem to move station for correction message transmission, IM waited response mode. IM of move station is initialized RS-232 port and modem, IM requests hand shaking to base station, completed connection establishment. Users are worked Differential surveying using receiving correction message between mobile phones.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.197-200
• /
• 2002

The current Inn technique is many problems that is permission of radio station using RF Wireless Modem, that is influence of geographic obstacle using radio wave, that is frequency interference, that is finiteness of frequency resources. In this paper, we are solved many elements, IM replaces RF Wireless Modem, we suggest transmission technique of correction message using mobile phone, we researched Interface Module development which is linkage of DGPS receiver and mobile phone. IM can transmit correction message passing RS-232 port and modem communication control. IM of base station is initialized RS-232 port and modem to move station for correction message transmission, IM waited response mode. IM of move station is initialized RS-232 port and modem, IM requests hand shaking to base station, completed connection establishment. Users are worked Differential surveying using receiving correction message between mobile phones.

• Journal of Biomedical Engineering Research
• /
• v.29 no.3
• /
• pp.191-197
• /
• 2008

This research focused on the development of wireless telemetry system that can monitor heart rates of multiple rehabilitation patients in real time without constraint. The whole system consists of the multiple patient's side devices (PSDs) and one central monitoring system (CMS). The PSD consists of a microphone, amplifier, filter, microcontroller, and RF (Radio Frequency) modem. In addition, the PSD was designed to be wearable and low power consumption. The CMS consists of an RF modem and general PC and it was designed to monitor heart rates from multiple patients simultaneously. The system warns an alarm signal when a patient's heart rate exceeds the pre-set range for each patient. This system can be useful to monitor the heart rate of exercising rehabilitation patients and control the patients condition and the exercising level.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.11a
• /
• pp.7-10
• /
• 2008

In our study, Monitoring RF System in real-time on leakage of gas cylinder is developed. The system is consisted of Pressure Transmitting part, Main Controller and Operating program. The pressure data of gas cylinder are transmitted to the modem of main controller part by RF module of Pressure Transmitting part and the data received through the modem are recorded in real-time and showed the situation of gas cylinder on the PC monitor. Through the test on the case of the artificial pressure-reduction, the detecting performance. of the developed system is conformed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.1
• /
• pp.127-132
• /
• 2013

In this paper, we design the physical layer of Guardian modem for wireless public networks. The physical layer is composed of a dual-band RF (Radio Frequency) transceiver and a baseband-processor with quasi-orthogonal codes. The 2.4/5GHz dual-band RF transceiver can overcome the communication difficulty of dense 2.4GHz band for wireless public environment. Also the quasi-orthogonal code can reduce the required ASIC (Application Specific Integrated Circuit) design area. Finally, we analyze the performance of the developed system in viewpoint of data rate, BER (Bit Error Rate), PER (Packet Error Rate). Moreover we verify the performance of the dual-band RF communication.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.1
• /
• pp.60-63
• /
• 2009

In this paper, Designed and implemented about module that generate division signal for uplink section and downlink section for controlling Tx/Rx antenna of 2.3-2.7GHz WiMAX TDD repeater. It is consisted of RF block and Baseband block, and because function of this module is that synchronize with WiMAX signal and create division signal for uplink section and downlink section, this module was designed only received path. And because of manufacturing of most RF block by one chip, this module could minimize area. And in baseband block, used the WiMAX Modem to detect Preamble and DL-MAP information of WiMAX signal. This design can process about 2.3-2.7GHz WiMAX.