본 논문에서는 KSTAR 토카막 진공용기의 세정을 위한 방전세정 시스템의 설계에 대해 기술하였다. 먼저 방전세정효율에 영향을 주는 매개변수들에 대해 논의하였으며. 실제 설계에서 직류방전 보다 낮은 압력에서 방전이 시작되고 유지되며 따라서 세정효율이 높은 RG 방전(RF-assisted DC glow discharge) 방법을 채택하였다. 그리고 방전세정의 균일성을 위해 두 개의 방전 전극을 진공용기의 진단포트(A,I-port)에 설치하였다. 설계된 방전세정 시스템은 KSTAR 진공용기 내벽 세정뿐만 아니라 제1벽의 연료재순환(fuel recycling)이나 보론화 처리(boronization)등의 연구에도 응용될 수 있다.
In order to study the structure of RF glow discharge driven at 13.56MHz in argon, the discharge voltage, current and phase shift between them will be measured over a wide range of discharge parameters(gas pressure between 1mTorr and 50mTorr with discharge power between 20mW and 200W). In this paper, the dc glow discharge characteristics and plasma parameters of both FTS and CPMS systems are studied experimentally. It is found that for CPMS system discharge is stablized under wider ranges of magnetic field and pressure than for FTS system. The plasma density and electron temperature of the plasma for these two systems are in the range of $10^{10}{\sim}7{\times}10^{11}[cm^{-3}]$ and $3.5{\sim}6.5$[eV], respectively.
전형적인 Grimm형 방전관을 제작하고 고주파 방전에 의한 금속 및 세라믹시료 분석에 적용하였다. 금속 알루미늄과 알루미나에 대해 방출 스펙트럼을 관찰하였고 방전에 미치는 고주파의 전력과 알곤 기체의 압력에 대한 영향을 관찰하였으며, 시료와 접촉된 전극에 나타나는 DC-bias voltage를 확인하였다. 또한 SEM 사진을 관찰함으로써 rf-sputtering에 의한 알루미나 표면의 미세구조를 확인하였다. 저합금강(BAS 404-405) 중의 망간성분과 황동시료(NIST 1108-1117) 중의 아연성분에 대해 검량곡선을 작성한 결과 양호한 직선성을 보여 주었다.
We developed 1- and 2-dimensional fluid model for the analysis of a capacitively coupled Ar RF(Radio Frequency) glow discharge. This discharge is in pure Ar gas at the pressure 100[mTorr], frequency 13.56[MHz] and voltage amplitude 120[V}. This model is based on the equations of continuity and electron energy conservation coupled with Poison equation. 2-dimensional model is simulated on the condition of GEC(Gaseous Electronic Conference cell). The geometry of the discharge chamber and the electrodes used in the model is cylindrically simmetric; tow cylinders for the electrodes are surrounded by the grounded chamber. It is shown that 1-dimensional model is very useful on the understanding of RF glow discharge property and of the movement of charged particles. 2-dimensional model predicts off-axis maximum structure as in the experiments and has the results in qualitatively and quantitatively good agreement with the experiments. Effects of dc self-bias voltage, guard ring and reactor geometry is discussed.
원자흡수용 gas-jet assisted RF 글로우 방전시스템을 제작하고 시료손실량과 원자흡광도에 미치는 실험변수들에 관한 연구를 수행하였다. 시료손실량과 흡광도는 방전전력, 압력 및 가스흐름에 큰 영향을 받았다. 원자흡광도와 시료손실량을 가스흐름이 600ml/min로 증가할 때 까지 계속 증가하였으며, 방전 압력은 3mbar에서 최대 흡광도를 나타내었다. 방전전력이 증가할수록 시료손실량과 흡광도는 증가하였으나 시스템의 안정도에 영향을 미치는 관계로 적당한 값의 선택이 필요하였다. 스테인리스 스틸 시료 중의 Ni과 황동시료 중의 Cr의 검량선을 작성한 결과 양호한 직선성이 얻어졌다.
초청정을 요구하는 진공용기의 내벽세정을 위한 RF 및 DC 방전세정장치를 제작하여 여러 가지 방전조건에 따라 세정효과를 조사하였다. Baking없이 방전세정만을 수행하였을 때는 baking만 진행했을 때와 비슷한 세정효과를 나타내었으며 세정후의 탈기체율은 반으로 줄어들었다. Baking과 방전세정을 동시에 진행하면 세정효과가 매우 증대되어 세정후의 탈기체율이 1/20으로 감소하였다. Baking과 방전세정을 동시에 수행 시 여러 방전조건에 따른 세정효과를 조사하였는데 이온이 진공용기 내벽에 부딪히며 세정을 할 때 이온에너지와 이온밀도가 중요한 역할을 하는 것으로 보였다. 진공용기를 세정함에 있어 RF방전세정이 DC 방전세정보다 효과적이라는 결과를 얻었다.
During operation of an RF glow discharge system, it can be observed that the reflected power tends to increase in small value, due to changes in the impedance of the system. This problem can be relieved by adding an automatic impedance matching circuit to the system. This paper presents a detailed method of automatically matching the input impedance of a 50 ohm transmission line to an RF glow discharge system at 13.56 MHZ.
In order to study the relationship between the physical properties of glow discharge plasma and the physical behavior of TiN thin film, electrical characteristics of RF discharge plasma driven at 13.56MHz in a parallel-plate electrode system were measured. Plasma parameters, such as electron density and temperature, are also studied since they may be considered as one of the very important factors deciding the physical properties of TiN thin film under given conditions of applied biasd voltage and pressure. The TiN thin film were fabricated over a wide range of discharge conditions, and some of the general relationships between the measured plasma parameters and the properties of TiN thin film were discussed.
A highly sensitive detecting method has been developed for determining part per billion of sulfur in $H_2S$/Ar plasma. The method is based on the excitation of Ar/$H_2S\;or\;Ar/H_2S/O_2$ mixture in hollow cathode glow discharge sustained by radiofrequency (RF) or 60 Hz AC power and the spectroscopic measurement of the intensity of emission lines from electronically excited $S_2^*\;or\;SO_2^*$ species, respectively. The RF or AC power needed for the excitation did not exceed 30 W at a gas pressure maintained at several mbar. The emission intensity from the $SO_2^*$ species showed excellent linear response to the sulfur concentration ranging from 5 ppbv, which correspond to S/N = 5, to 500 ppbv. But the intensity from the $S_2^*$ species showed a linear response to the $H_2S$ only at low flow rate under 20 sccm (mL/min) of the sample gas. Separate experiments using $SO_2$ gas as the source of sulfur demonstrated that the presence of $O_2$ in the argon plasma is essential for obtaining prominent $SO_2^*$ emission lines.
RF 글로우 방전 원자 방출 분광법을 사용하여 다층 도금강판 두께분석을 하였다. 일반적으로 gas jet boosted 글로우 방전은 플라스마 안정성과 스퍼터링 효율이 우수하여 기존의 두께 분석법에서 측정이 어려운 다층 두께분석이 가능하며, RF를 사용하여 비전도성 실리콘-수지계열의 다층 도금강판 두께분석이 가능하였다. RF gas-jet boosted 글로우 방전은 방전전원과 가스 흐름량 그리고 방전압력에 의해 스퍼터링을 조절할 수 있다. 그래서 스퍼터링 효율에 의해 다층 도금된 강판의 경우 소재에 따라 서로 다른 조건에서 측정할 수가 있었다. 본 연구에서 두께 $20{\mu}m$의 아연층을 가진 아연 도금강판의 두께 및 조성을 분석하기 위해서 최적조건에 대한 연구를 하였고, 두 가지 기준물질로 구성된 수지 도금강판을 이용해서 검량선을 측정하였다. 본 연구에 최적조건 및 검량을 하기 위해서 아연합금 도금강판 및 실리콘-수지 도금강판은 포항 산업 과학 기술원(RIST)에서 제공하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.