• 제목/요약/키워드: RF Transmitter

검색결과 232건 처리시간 0.028초

DISTRIBUTED CONTROL SYSTEM FOR KSTAR ICRF HEATING

  • Wang, Son-Jong;Kwak, Jong-Gu;Bae, Young-Dug;Kim, Sung-Kyu;Hwang, Churl-Kew
    • Nuclear Engineering and Technology
    • /
    • 제41권6호
    • /
    • pp.807-812
    • /
    • 2009
  • An ICRF discharge cleaning and a fast wave electron heating experiment were performed. For automated operation and providing the diagnostics of the ICRF system, the ICRF local network was designed and implemented. This internal network provides monitoring, RF protection, remote control, and RF diagnostics. All the functions of the control system were realized by customized DSP units. The DSP units were tied by a local network in parallel. Owing to the distributed feature of the control system, the ICRF local control system is quite flexible to maintain. Developing the subsystem is a more effective approach compared to developing a large controller that governs the entire system. During the first experimental campaign of the KSTAR tokamak, the control system operated as expected without any major problems that would affect the tokamak operation. The transmitter was protected from harmful over-voltage events through reliable operation of the system.

해양 부이용 920 MHz 대역 안테나 (920 MHz Band Antenna for Marine Buoy)

  • 최형동;김성율;이성렬
    • 한국항행학회논문지
    • /
    • 제24권6호
    • /
    • pp.593-600
    • /
    • 2020
  • 해양 IoT 서비스를 위한 장치들은 해양 환경에 강인해야 한다. 특히 바닷물 속에 부유하는 전송 장치는 바닷물의 영향을 덜 받도록 설계되어야 한다. 본 연구에서는 전자 어구 실명제 모니터링 시스템에서 어구 상태를 감시하는 부이에 내장되는 안테나를 설계하고 제작한 결과를 보이고 있다. 안테나의 주파수 대역은 920 MHz이고, 부이의 초소형과 경량화를 위해 PCB 패턴 안테나 구조로 설계 제작되었다. 시뮬레이션 결과 제안한 안테나를 내장한 부이가 바닷물 속에 잠기는 정도가 심할수록 반사 계수 증 RF 특성이 저하되지만 빔의 방사 각도는 안테나 하층부에서 점점 상층부로 옮겨가는 것을 확인하였다. 즉 바닷물의 영향을 많이 받을수록 전파 성능은 저하되지만 방사 특성은 해양 IoT 서비스 환경에 적합하다는 것을 확인하였다. 향후 RF 성능을 개선할 수 있는 안테나 구조를 변경 설계하면 제안한 안테나와 부이는 LPWA (low power wide area) 기반 IoT 네트워크 구현에 기여할 것으로 기대된다.

CARTRI 로봇의 목표물 검출과 장애물 검출을 위한 RE-초음파 센서 시스템 개발 (Development of an RF-Ultrasonic Sensor System to Detect Goal and Obstacle for the CARTRI Robot)

  • 안철기;이민철
    • 제어로봇시스템학회논문지
    • /
    • 제9권12호
    • /
    • pp.1009-1018
    • /
    • 2003
  • In a park or street, we can see many people Jogging or walking with their dogs chasing their masters. In the previous study, an entertainment robot, CARTRI that imitates the dog's behavior was created. The robot's task was chasing a moving goal that was recognized as the master. The physical structure of the CARTRI robot was three-wheel type locomotion system. The sensor system which could detect the position of the master in the outdoor space, was consists of a signal transmitter which was held by the master and five ultrasonic receivers which were mounted on the robot. In the experiment, the robot could chase a human walking in outdoor space like a park. But it could not avoid obstacles and its behavior was only goal-chasing behavior because of the limit of the sensor system. In this study, an improved RF-ultrasonic sensor system which can detect both goal and obstacle is developed in order to enable the CARTRI robot to carry out various behavior. The sensor system has increased angle resolution by using eight ultrasonic receivers instead of five in the previous study. And it can detect obstacle by using reflective type ultrasonic sensors. The sensor system is designed so that detection of goal and obstacle could be conducted in one sampling period. The Performance of the developed sensor system is evaluated through experiments.

밀리미터파 대역에서 저가격화 시스템을 위한 Self Oscillating Double Conversion Mixer (Self Oscillating Double Conversion Mixer for low cost mm-wave system)

  • 이상진;안단;이문교;권혁자;백태종;전병철;박현창;이진구
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2006년도 하계종합학술대회
    • /
    • pp.491-492
    • /
    • 2006
  • The MMIC (Microwave Monolithic Integrated Circuit) self oscillating double conversion mixer was designed and fabricated for the V-band transmitter applications. The MMIC self oscillating double conversion mixer which dose not need external local oscillator was designed using GaAs PHEMT technology. The first self oscillating mixer use PHEMT technology. The first self oscillating mixer use PHEMT for $f_{LO}$ signal generation and $f_{IF}$ signal is applied at gate port and $f_{RF1}$ signal is generated at a drain port of first stage. The second gate mixer use PHEMT for $f_{LO}$ signal and $f_{RF1}$ signal is applied at gate port and $f_{RF2}$ signal is output at a drain port of second stage.

  • PDF

아리랑 위성 2호 탑재체 하향링크 시스템 검증 (KOMPSAT-2 Payload Downlink System Verification)

  • 이진호;김희섭;천용식
    • 항공우주기술
    • /
    • 제5권2호
    • /
    • pp.108-113
    • /
    • 2006
  • 본 논문은 아리랑위성 2호 탑재체의 지상하향링크 시스템 성능을 측정한 과정과 결과를 수록하였다. 우선 안테나 접속 상태와 안테나의 성능을 판단할 수 있는 복사패턴과 VSWR 을 측정하였으며, 송신기의 상태 및 RF 스펙트럼의 분포를 확인하여 스펙트럼 상에 원치 않는 출력이 없음을 검증하였다. 마지막으로 안테나 햇과 실제 안테나를 이용하여 수신 시 스템과의 호환성 시험을 수행하였는데, 비트오류 확률 등이 측정되었다. RF 시스템에 대한 이러한 검증 시험은 위성의 이동, 조립 및 환경시험 후에 반드시 수행되어서 시스템 상의 성능 저하 유무를 확인할 수 있어야 한다.

  • PDF

3-Level Envelope Delta-Sigma Modulation RF Signal Generator for High-Efficiency Transmitters

  • Seo, Yongho;Cho, Youngkyun;Choi, Seong Gon;Kim, Changwan
    • ETRI Journal
    • /
    • 제36권6호
    • /
    • pp.924-930
    • /
    • 2014
  • This paper presents a $0.13{\mu}m$ CMOS 3-level envelope delta-sigma modulation (EDSM) RF signal generator, which synthesizes a 2.6 GHz-centered fully symmetrical 3-level EDSM signal for high-efficiency power amplifier architectures. It consists of an I-Q phase modulator, a Class B wideband buffer, an up-conversion mixer, a D2S, and a Class AB wideband drive amplifier. To preserve fast phase transition in the 3-state envelope level, the wideband buffer has an RLC load and the driver amplifier uses a second-order BPF as its load to provide enough bandwidth. To achieve an accurate 3-state envelope level in the up-mixer output, the LO bias level is optimized. The I-Q phase modulator adopts a modified quadrature passive mixer topology and mitigates the I-Q crosstalk problem using a 50% duty cycle in LO clocks. The fabricated chip provides an average output power of -1.5 dBm and an error vector magnitude (EVM) of 3.89% for 3GPP LTE 64 QAM input signals with a channel bandwidth of 10/20 MHz, as well as consuming 60 mW for both channels from a 1.2 V/2.5 V supply voltage.

300GHz 대역 1.5Gbit/s 무선 데이터 전송 시스템 구현 (Implementation of An 1.5Gbit/s Wireless Data Transmission System at 300GHz Band)

  • 이원희;정태진
    • 한국인터넷방송통신학회논문지
    • /
    • 제11권2호
    • /
    • pp.1-6
    • /
    • 2011
  • 300GHz 대역의 캐리어 주파수를 이용하여 1.5Gbit/s 무선 데이터 전송 시스템을 구현하였다. RF Front-end는 송수신기 각각 쇼트키 다이오드 서브하모닉 믹서, 주파수 3배기, 혼안테나로 구성하였다. 송신기 및 수신기에 사용된 서브하모닉 믹서의 LO 주파수는 각각 150GHz, 156GHz이다. 변조방식은 ASK(Amplitude Shift Keying)이며, 수신기에서는 헤테로다인 방식의 Envelope 검출 방식을 사용하였다. 서브하모닉 믹서의 변환 손실은 9.8dB, 시스템 손실은 1.2dB로 측정되었다. HD-SDI 형식을 갖는 1.5Gbit/s 비디오 신호를 송신기 출력 $20{\mu}W$에서 광학 렌즈 없이 40cm까지, 광학 렌즈를 포함하여 4.2m까지 HDTV로 전송하였다.

하이브리드 통신을 이용한 항로표지의 원격관리 제어시스템에 관한 연구 (A Study on the Tele-controller System of Navigational Aids Using Hybrid Communication)

  • 전중성;오진석
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제35권6호
    • /
    • pp.842-848
    • /
    • 2011
  • 다중통신을 지원하는 하이브리드 통신 제어보드는 저전력의 8-bit 마이크로콘트롤러인 ATxmega128A1으로 설계하였으며, 마이크로콘트롤러는 다중통신을 위한 모뎀과 GPS 모듈 등을 시리얼 인터페이스 하기 위한 8개의 UART 포트가 갖추어져 있으며, 내부에 2K 바이트의 프로그램 매개변수와 프로그램이 동작하는데 필요한 데이터를 저장할 수 있는 EEPROM과 128K 바이트의 플래시 메모리 및 프로그램이 실행되는 8K 바이트의 SRAM으로 구성되어 있다. 항로표지의 원격 관리를 CDMA, TRS, RF 등 하이브리드 통신을 이용하면 개별 통신 방식별로 음영지역이 존재하는 경우에도, 최적의 통신방식을 선택하여 통신을 수행하게 됨으로써, 통신 음영지역의 해소가 가능하다. 또한 통신장치마다 동일한 데이터 프레임을 사용함으로써 데이터의 호환성을 높였다. 실험은 30일 동안 각 부표에서 매 5분마다 데이터를 취득하였으며, 데이터 수신율은 85 % 이상을 보였다.

RF-CBTC 시스템을 위한 ISM 대역에서의 CPSK 송신기의 설계 및 성능분석 (Design and Performance Analysis of CPSK Transmitter for RF-CBTC System in ISM Band)

  • 김성철
    • 한국ITS학회 논문지
    • /
    • 제16권5호
    • /
    • pp.152-161
    • /
    • 2017
  • CBTC의 통신기술은 IEEE 802.11.x 표준을 사용하고 있으며 ISM밴드 대역중 하나인 2.4GHz를 사용하게 된다. 따라서 CBTC 철도 무선시스템으로서는 통신 지연, 통신 왜곡 및 정보 손실 등이 발생 할 수 있다. 이러한 문제를 극복하기 위해 ISM 대역중 908MHz 일정진폭을 갖는 직접 시퀀스 확산스펙트럼 송신기를 제안하였다. 성능 분석을 위해 주요파라미터인 아이 다이아그램과 scatter diagram을 고려하여 특성 분석을 하였다. 또한 국부발진 신호의 위상잡음 특성은 약 60dBc/Hz로서 기준신호와 비교 시 특성이 상당히 우수함을 알 수 있었다. 또한 2차 국부 발진 신호의 기준 주파수 억압이 50dB이하가 됨을 알 수 있었다. 제안한 변조방법에서 보조신호는 양과 음의 발생확률을 균일하게 함으로써 출력스펙트럼에서의 선스펙트럼성분에 의한 간섭을 제거하였으며 비선형 증폭기를 통과한 후의 스펙트럼의 측대파의 재생율이 현저히 줄어들었음을 볼 수 있었다.

간섭 신호에 강인한 특성을 갖는 데이터 통신과 위치 인식 시스템을 위한 3~5 GHz 대역의 IR-UWB RF 송수신기 (A 3~5 GHz Interferer Robust IR-UWB RF Transceiver for Data Communication and RTLS Applications)

  • 하종옥;박명철;정승환;어윤성
    • 한국전자파학회논문지
    • /
    • 제25권1호
    • /
    • pp.70-75
    • /
    • 2014
  • 본 논문에서는 데이터 통신 및 위치 인식이 가능한 IR-UWB(Impulse Radio Ultra-Wide Band) 송수신기 회로를 제안한다. UWB 수신기는 에너지 검출 방식의 OOK(On-Off Keying) 변조가 가능하도록 설계가 되었다. UWB pulse generator는 디지털 로직을 이용하여 설계되었으며, UWB 신호 송신시 발생할 수 있는 Side lobe를 제거하기 위한 가우시안 필터가 적용되었다. 측정된 수신기의 감도는 4 GHz 중심주파수와 1 Mbps PRF(Pulse Repetition Frequency)에서 -65 dBm으로 측정이 되었으며, 펄스당 에너지 효율은 20.6 pJ/bit로 측정되었다. 1.8 V 전원에서 DA를 포함한 전류 소모는 수신기과 송신기가 각각 27.5 mA와 25.5 mA이다.