• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.8
• /
• pp.632-639
• /
• 2018

This paper presents a single antenna radar sensor with a Ku-band radar transceiver IC realized by 130 nm CMOS processes. In this radar receiver, sensitivity time control using a DC offset cancellation feedback loop is employed to achieve a constant SNR, irrespective of distance. In addition, the receiver RF block has gain control to adjust high dynamic range. The RF output power is 9 dBm and the full chain gain of the Rx is 82 dB. To reduce the direct-coupled Tx signal to the Rx in a single antenna radar, a stub-tuned hybrid coupler is adopted instead of a bulky circulator. The maximum measured distance between the horn antenna and a metal plate target is 6 m.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.545-546
• /
• 2006

The improved model that external capacitances are connected to a conventional BSIM3v3 RF Macro model with Rg and Rsub is developed in this paper. The extracted external capacitances and resistances are modeled by scalable fitting equations. The modeled S-parameters of $0.13{\mu}m$ NMOSFET agree well with measured ones from 10MHz to 10GHz, verifying the accuracy of the improved model.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.251-256
• /
• 1999

RF CMOS 집적회로 기술은 CMOS 기술의 급격한 발전과 더불어 최근 크게 주목 받고 있다. 이는 CMOS가 제공 할 수 대량생산 능력으로 인해 기존 RF IC의 저가격화뿐 아니라 미래의 복합.다기능 무선 멀티미디어 단말기 구현을 위란 single chip solution을 제공 할 수 있는 가능성이 가장 높기 때문이다. 본 논문은 먼저 개인 휴대 통신 단말기 시장을 전망해보고, 향후 전개될 다양한 무선서비스에 대응하기 위한 RF CMOS 집적회로의 소자 및 설계 기술개발 현황과 향후의 발전 전망을 기술한다.

• Korean Journal of Community Nutrition
• /
• v.27 no.3
• /
• pp.245-253
• /
• 2022

Objectives: This study was conducted to find out if the dietary iron intake of Koreans estimated by 2 different methods (iron content sources) using the food intake data from the Korea National Health and Nutrition Examination Survey (KNHANES) are comparable. One method was based on the KNHANES's Food & Nutrient Database (FND) derived mainly from the Korean Food Composition Table and the other used the iron content (IC) of food samples processed in the Korean Total Diet Study (KTDS). Methods: Dietary intake data from the 2013-2016 KNHANES was used to select representative foods (RFs) in KTDS for iron analysis. Selection of the RFs and cooking methods for each RF (RF × cooking method pair) was performed according to the 'Guidebook for Korean Total Diet Studies' and resulted in a total of 132 RFs and 224 'RF × cooking method' pairs. RFs were collected in 9 metropolitan cities nationwide once or twice (for those with seasonality) in 2018 and made into 6 composites each, based on the origin and season prior to cooking. Then, the RF composites prepared to a 'table ready' state for KTDS were analyzed by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). Dietary iron intake of the Korean population was estimated using only RFs' intake data based on the 2 sources of iron content, namely FND-KNHANES and IC-KTDS. Results: RFs in KTDS covered 92.0% of total food intake of Koreans in the 2016-2018 KNHANES. Mean iron intake of Koreans was 7.77 mg/person/day by IC-KTDS vs 9.73 mg/person/day by FND-KNHANES. The major food groups contributing to iron intake were meats (21.7%), vegetables (20.5%), and grains & cereals (13.4%) as per IC-KTDS. On the other hand, the latter source (FND-KNHANES) resulted in a very different profile: grains & cereals (31.1%), vegetables (16.8%), and meats (15.3%). While the top iron source was beef, accounting for 8.6% in the former, it was polished rice (19.2%) in the latter. There was a 10-fold difference in the iron content of polished rice between 2 sources that iron intakes excluding the contribution by polished rice resulted in very similar values: 7.58 mg/person/day by IC-KTDS and 7.86 mg/person/day by FND-KNHANES. Conclusions: This study revealed that the dietary iron intake estimated by 2 different methods were quite comparable, excluding one RF, namely polished rice. KTDS was thus proven to be a useful tool in estimating a 'closer-to-real' dietary intake of nutrients for Koreans and further research on various nutrients is warranted.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.393-396
• /
• 1999

A circuit model of silicon substrate coupling for CMOS RF-IC design is developed. Its characteristics are analyzed by using a simple RC mesh model in order to investigate substrate coupling. The coupling effects due to the substrate were characterized with substrate resistivity, oxide thickness, substrate thickness. and physical distance. Thereby the silicon substrate effects are analytically investigated and verified with simulation. The analysis and simulation of the model have excellent agreements with MEDICI(2D device simulator) simulation results.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.199-202
• /
• 1999

In this paper, a possibility of building various types of RF passive components using the silicon micromachining technique has been examined with special emphasis on the wireless and mobile communication applications. Silicon micromachining technique is compatible with conventional silicon IC process and could provide a possibility of integrating base-band signal processing units and RF passive and active circuit components all in one silicon wafer rendering implementation of system-on-chip paradigm for future mobile and wireless communication systems.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.44-52
• /
• 2002

본 논문에서는 RF와 마이크로파 응용을 위한 MEMS 수동 소자에 대한 내용이다. 이 수동 소자들을 만들기 위해서 개발된 3타원 MEMS공정은 기존의 실리콘 공정과 완전한 호환성을 가지고 한 칩으로 집적화 시킬 수 있는 공정이다. 이 3차원 MEMS 공정은 기존 실리콘 긍정이 가지고 있는 한계를 극복하기 위한 방법으로써 개발되었다. 개발된 공정을 이용하여 실리콘 공정에서 구현할 수 없었던 좋은 성능의 인덕터, 트랜스포머 및 전송선을 RF와 마이크로파 응용을 위해서 구현하였다. 저 전압, 높은 차단율을 위한 push-pull 개념을 도입한 MEMS 스위치를 구현하였다. 또한 높은 Q를 갖는 MEMS 인덕터를 최초로 CMOS 칩과 집적화에 성공하여 600kHz 옵셋 주파수에서 -122 dBc/Hz의 특성을 갖는 2.6 GHz 전압 제어 발진기를 제작하였다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.3
• /
• pp.123-127
• /
• 2001

The prediction method of the parameter C/sub gs/ of CMOS transistor is proposed by calculating the mobil charge in inversion layer of COMS transistor. This parameter C/sub gs/ decided on the cutoff frequency in MOS transistor in RF range and coupled input and output. This parameter C/sub gs/ in RF range is very important parameter in small signal circuit model. This proposed method is contributed to developing software of extracting parameter value in equivalent circuit model. The method provide the important information to construct a RF nonlinear model for multifinger gate MOSFET. This method will be very valuable to develop a large signal MOSFET model for nonlinear RF IC design.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.11a
• /
• pp.131-137
• /
• 2007

본 연구에서는 RLS(Rescursive Least Square) 추정 알고리즘을 이용하여 정전용량형 센서를 사용한 원격 RF 센서 시스템을 구현하고자 한다. IC 칩 형태의 원격 RF 센서 시스템이 가지는 구성의 복잡성 그리고 전력소모 문제를 해결하기 위해 보다 간단한 유도결합모델이 제안된다. 원격 RF 시스템은 페이저법을 이용하여 수학적으로 모델링되며, 모델기반의 RLS 알고리즘을 적용하기위해 시스템의 파라메타를 재배열한다. 오차 제곱합의 수렴특성을 가진 RLS 알고리즘을 이용하여 정전용량 파라메타를 추정한다. 실제 위상차를 측정하기 위해 Exclusive OR를 이용한 위상차 감지 장치를 제안한다. 센서로는 각종 환경 측정-습도, 압력 등-에 실제 활용되고 있는 정전용량형 센서를 채택한다. 잡음을 내포한 측정 데이터에 대한 추정 성능을 확인함으로써 그 유효성을 검증하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.801-807
• /
• 2012

In this paper, design and implementation of frequency down converter based on LC filter technic. Single frequency down converter, designed a low-noise amplifier, mixer, IF amplifier, LC filter was configured. And it is composed of DC block capacitors and RF bypass capacitor. LC filter, replace it with the IC reduced the power and realized low cost. The gain of single down converter is about 10dBm and realized by 18MHz bandwidth at 70MHz band.