• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.8
• /
• pp.555-559
• /
• 2003

In this paper, a new CMOS RF model for RF IC design including the capacitance effect, the skin effect, and the proximity effect between metal lines on the Si surface is proposed for tile first time for accurately predicting the RF behavior of CMOS devices. The capacitances between metal lines on the Si surface are modeled with the layout. And the skin effect is modeled with a parallel branch added in equivalent circuit of metal line. The proximity effect is modeled by adding the mutual inductance between cross-coupled inductances in the ladder circuit representation. Compared to the BSIM 3v3. the proposed RF model shows good agreements with the measured data and shows well the frequency dependent behavior of devices in GHz ranges.

• ETRI Journal
• /
• v.25 no.3
• /
• pp.195-202
• /
• 2003

This paper proposes a new LDMOSFET structure with a trenched sinker for high-power RF amplifiers. Using a low-temperature, deep-trench technology, we succeeded in drastically shrinking the sinker area to one-third the size of the conventional diffusion-type structure. The RF performance of the proposed device with a channel width of 5 mm showed a small signal gain of 16.5 dB and a maximum peak power of 32 dBm with a power-added efficiency of 25% at 2 GHz. Furthermore, the trench sinker, which was applied to the guard ring to suppress coupling between inductors, showed an excellent blocking performance below -40 dB at a frequency of up to 20 GHz. These results confirm that the proposed trenched sinker should be an effective technology both as a compact sinker for RF power devices and as a guard ring against coupling.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.3
• /
• pp.1-7
• /
• 1999

A single RF transceiver evaluation board have been developed for the purpose of application to the 900MHz band transceiver contained RF-IC chip And environment test was evaluated. The RF-IC chipset includes LNA(Low Noise Amplifier), down-conversion mixer, AGC(Automatic Gain Controller), switched capacitor filter and down sampling mixer. The RF evaluation board for the testing of chipset contained various external matching circuits, filters such as RF/IF SAW(Surface Acoustic Wave) filter and duplexer and power supply circuits. With the range of 2.7~3.3V the operated chip revealed moderate power consumption of 42mA. The chip was well operated at the receiving frequency of 925~960MHz. Measurement result is similar to general RF receiving specification of the 900MHz digital mobile phone.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.914-921
• /
• 2005

신제품으로 개발 중인 초소형 CMOS RF 전압 제어발진기(VCO) IC 에 대한 공인된 시험 규격은 현재 개발되어 있지 않다. 또한 제조업체들은 고유의 시험방법을 보유하고 있을 것이나 공개하지 않고 있는 실정이다. 한편 일부 해외 제조업체에서 국제 규격인 IEC 또는 JEDEC 을 기준으로 시험방법을 제시하고 있지만, 이러한 시험규격들은 개별 부품을 솔더링하는 하이브리드 공정을 이용하여 제작된 VCO 를 대상으로 한 것이다. 그러므로 CMOS 반도체 공정을 이용한 IC 형으로 개발 중인 VCO 를 평가하기에는 적합하지 않다. 이에 본 연구에서는 신개발 부품인 CMOS RF VCO IC 에 대한 신뢰성 시험 및 평가 기준을 수립하고, 신뢰성 확보를 위한 신제품 개발 단계에서의 신뢰성 평가 프로세스를 개발하고자 한다.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.9
• /
• pp.19-27
• /
• 1998

The Transmitter part of single RF transceiver chip for an extended GSM handset application was circuit-designed, fabricated adn evaluated. The RF-IC Chip was processed by 0.8${\mu}m$ Si BiCMOS, 80 pin TQFP of $10 {\times} 10mm$ size, 3.3V operated RF-IC reveals, in general, quite reasonable integrity and RF performances. This paper describes development resuts of RF transmitter section, which includes IF/RF up-conversion mixer, IF/RF polyphase and pre-amplifier. The test results show that RF transmitter section is well operated within frequency range of 880~915MHz, which is defined on the extended GSM(E-GSM) specification. The transmitter section also reveals moderate power consumption of 71mA and total output power of 8.2dBm.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.911-914
• /
• 2000

본 논문에서는 배터리가 없는 ASK 전송방식의 RFID(Radio Frequency IDentification) Transponder 칩 설계에 관한 내용을 다룬다. Transponder IC는 power-generation 회로, clock-generation 회로, digital block, modulator, overoltge protection 회로로 구성된다. 설계된 칩은 저전력 회로를 적용하여 원거리 transponder칩을 구현할 수 있도록 하였다. 설계된 회로는 0.25㎛ 표준 CMOS 공정으로 레이아웃하여 제작하였다.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.104-107
• /
• 2000

We designed and implemented the RFIC(RF front-end IC) for DTV(Digital TV) tuner. The DTV tuner RF front-end consists of low noise IF amplifier fur the amplification of 900 MHz RF signal and down conversion mixer for the RF signal to 44MHz IF conversion. The RFIC is implemented on ETRI 0.8u high resistive (2㎘ -cm) and evaluated by on wafer, packaged chip test. The gain and IIP3 of IF amplifier are 15㏈ and -6.6㏈m respectively. For the down conversion mixer gain and IIP3 are 13㏈ and -6.5㏈m. Operating voltage of the IF amplifier and the down mixer is 5V, current consumption are 13㎃ and 26㎃ respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5A
• /
• pp.496-503
• /
• 2010

The implementation of a RF transceiver for WRAN(Wireless Regional Area Network) system based on IEEE 802.22 standard using Cognitive Radio technology is presented in this paper. A CMOS RF transceiver IC for WRAN system operates in VHF/UHF(54~862MHz) broadband, and employs dual-path direct-conversion configuration and the in-band harmonic distortions are effectively suppressed by exploiting the dual-path direct conversion architecture. For 64QAM(3/4 coding rate) OFDM signal, an EVM of <-31.4dB(2.7%) has been achieved at 10dBm off-chip PA output power and the total chip area with pads is 12.95 mm2. The experimental results show that the proposed CMOS RF transceiver IC has perfect performance for WRAN system based on TDD(Time Division Duplex) mode.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.181-183
• /
• 2007

본 논문은 RF 리더기와 RF 태그 상호간의 통신시에 발생할 수 있는 충돌을 감지하고 이를 능동적으로 회피할수 있는 RFID(Radio Frequency IDentification)의 설계에 관한 내용이다. RFID는 사람, 자동차, 화물, 상품 등에 정보를 부가하는 시스템으로 그 부가정보를 무선통신매체를 이용하여 비접족으로 해독하는 시스템으로 기존의 바코드보다 데이터의 전송속도와 용량의 증가 그리고 편리성이 향상되는 장점이 있으나, 동시에 여러개의 RF태그와의 무선통신으로 인한 데이터의 충돌이 발생할 수 있다. 이러한 충돌을 감지하고 이를 적절하게 회피하는 것은 RFID 시스템의 신뢰성을 높이는데 필수적인 요소이다. RFID 태그로 사용되기 위해서는 건전지로 구동될 수 있도록 저전력소모가 요구되며 또한 통신의 시작과 충돌을 파악할 수 있는 캐리어 감지기능이 필수적이다. 본 논문에서는 이러한 조건들을 만족하는 Chipcon 사(社)의 양방향 RF IC를 사용하였다. Chipcon 사(社)의 양방향 RF IC는 다중 주파수 대역의 선택과 변조방식을 시리얼통신을 통해서 손쉽게 변경할 수 있기 때문에 충돌감지시 다양한 회피알고리즘을 상황에 맞게 구현할 수 있다. 본 논문에서는 양방향 RF IC를 사용하여 충돌을 감지하고 회피할 수 있는 RFID시스템을 설계하고 구현하였다.

• Journal of Advanced Navigation Technology
• /
• v.1 no.1
• /
• pp.23-34
• /
• 1997

A multi-channel digital GPS receiver has been developed including a RF-to-IF engine (engine 1), a digital signal processing engine (engine 2) with a microprocessor interfacing, and a navigation software. A high speed SiGe heterojunction bipolar transistor (HBT) as a active device has been mounted on chip-on-board (COB) type hybrid ICs such as LNA, mixer, and VCO in RF front-end of the engine 1 board. A 6-channel digital correlator together with a real-time clock and a microprocessor interface has been realized using an Altera Flex 10K FPGA as well as ASIC technology. Navigation software controlling the correlator for GPS signal tracking, retrieval and storing a message retrieval, and position calculation has been implemented. The GPS receiver was tested using a single channel STR2770 simulator. Successful navigation message retrieval and position determination was confirmed.