• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.1 no.1
• /
• pp.87-94
• /
• 2001

Silicon nitride films grown by plasma-enhanced chemical vapor deposition (PECVD) are useful for a variety of applications, including anti-reflecting coatings in solar cells, passivation layers, dielectric layers in metal/insulator structures, and diffusion masks. PECVD systems are controlled by many operating variables, including RF power, pressure, gas flow rate, reactant composition, and substrate temperature. The wide variety of processing conditions, as well as the complex nature of particle dynamics within a plasma, makes tailoring SiN film properties very challenging, since it is difficult to determine the exact relationship between desired film properties and controllable deposition conditions. In this study, SiN PECVD modeling using optimized neural networks has been investigated. The deposition of SiN was characterized via a central composite experimental design, and data from this experiment was used to train and optimize feed-forward neural networks using the back-propagation algorithm. From these neural process models, the effect of deposition conditions on film properties has been studied. A recipe synthesis (optimization) procedure was then performed using the optimized neural network models to generate the necessary deposition conditions to obtain several novel film qualities including high charge density and long lifetime. This optimization procedure utilized genetic algorithms, hybrid combinations of genetic algorithm and Powells algorithm, and hybrid combinations of genetic algorithm and simplex algorithm. Recipes predicted by these techniques were verified by experiment, and the performance of each optimization method are compared. It was found that the hybrid combinations of genetic algorithm and simplex algorithm generated recipes produced films of superior quality.

• Journal of information and communication convergence engineering
• /
• v.5 no.4
• /
• pp.389-393
• /
• 2007

The distribution of donated blood for medical purpose is an area that presents many challenges. In order to establish a comprehensive solution, the current patterns of distribution must be reviewed and problems related to it need to be clearly understood. This paper introduces 'Radio Frequency Identification (RFID) System', as a potential solution to some of the problems which arise in the process of blood supply distribution, and a way to systematically manage the blood supply. For the various possible RFID systems, the reader and tag must be suitable for the purpose of blood distribution. A database has been designed that can recognize tags and objects in a ubiquitous RFID blood distribution system. In this paper, we design the real-time software to control the RFID reader system and transponder, using the EEPROM memory by RFID. The experimental results confirm that the transmission rate of 3.9kbps for RF is 125 KHz. The electric power usage of transponder chip is $100{\mu}W$, with the recognition distance is about 7cm range.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.380-382
• /
• 2001

This paper presents the implementation of IEEE 802.11 Medium Access Control and Physical Layer Protocol that can be applied to wireless LAN system. We have used PRISM2 chipsets from Intersil to build the baseband, IF, and RF parts. DSSS(Direct Sequence Spread Spectrum) physical layer at 2.4GHz ISM band is adopted in the hardware prototype. To meet the high-speed requirement of physical layer, we have designed the MAC protocol layer with embedded firmware and FPGA. The prototype board is shown to be able to support the physical layer of 5GHz and 600Hz wireless LAN systems.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.97-101
• /
• 2011

Quad band p-HEMT SP6T switch for handset applications was developed. To achieve the low insertion loss and high isolation, trade-off between "On" state and "Off" state was considered by optimization of unit cell. Especially, in case isolation between transmit port and receive port, it was achieved by large capacitors and miniaturization of chip size was achieved by common voltage control and ground using back via process. Designed SP6T switch has size of $950um{\times}100um$ and take into consideration the gate recess error, excellent loss and isolation was confirmed in operating frequency.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2017.11a
• /
• pp.92-93
• /
• 2017

최근 IT 및 사이니지 기술을 포함한 여러 기술의 발전 형태가 융복합적 기술의 방향으로 전환됨으로서, 기술 간 장벽이 허물어지고, 상호 연관성을 갖게 됨에 따라 사이니지 및 IT기술이 접목된 새로운 융복합 기술에 대한 연구가 지속적으로 이루어지고 있다. 특히, LED 광원의 일종인 사이니지를 이용하여 광 데이터를 전송할 수 있는 기술에 대한 연구가 학계, 연구소 및 관련 산업체 등에서 지속적으로 진행되고 있는 상황이다. 이에 본 논문에서는 LED 전광판 사이니지를 이용하여 무선광통신이 용이한 LED 소재에 대한 연구를 진행하였다. LED 전광판 사이니지를 이용한 무선광통신 기술은 LED 광원이 지닌 특성을 토대로 RF방식 대비 높은 주파수 대역과 고속의 데이터 전송이 가능하기 때문에 높은 잠재력과 파급력을 통하여 무선통신 분야에서의 새로운 통신 척도로 활용될 수 있을 것으로 예상된다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.219-223
• /
• 2003

This paper describes an estimation of DOA(Direction Of Arrival) measurement system using DBF receiver with linear array antenna. This DBF receiver is composed of resistive FET mixer using low IF mettled. A radio frequency(RF), a local oscillator(LO) and ail intermediate frequency(IF) considered in this research are 2.09 GHz, 2.08 GHz and 10 MHz, respectively. This receiver is composed of a band-pass filter, a low-pass filter, a DC bias circuit. DOA measurement system is consist of linear array antenna, DBF receiver, AD control box and computer in the anechoic chamber. Receiving antenna is 4-array monopole antenna and DBF receiver is 4-Ch resistive FET mixer without amplifier. DOA algorithm is implemented using MUSIC algorithm with high resolution. We show that the results of DOA is $-30^{\circ},\;0^{\circ}$ and $60^{\circ}$, respectively. And we know that DOA estimation error occur by antenna radiation pattern and fabrication error of antenna array.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.05a
• /
• pp.320-328
• /
• 2005

Government is supporting development of home networking. But, this new system is much expensive to introduce in the home. And limit for establishment is so many in the home. Therefore, in this paper, Present direction of home automation system that can have high efficiency into low expense, induction of automation system is easied in the home. Also, install can be easy and do remote control in PC, HP, PDA because use PLC or HN RF, DB.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.3
• /
• pp.323-330
• /
• 2018

In this paper, design and fabrication of a MSP(Multiple Scattering Points) discriminator for a simulated target measurement using a HRR(High Range Resolution) RADAR are described. The MSP discriminator is designed to provide a reference signal at the installed point on the simulated target in an outdoor test. The MSP discriminator is designed to have a remote control function that can turn the MSP discriminator on and off when the target moves to a remote location. While the MSP discriminator is off, the MSP discriminator is designed to be small enough not to spoil the target's unique RCS. The MSP discriminator consists of RF components in the Ku-band. In order to prevent spreading of the signal, a cable were added to the MSP discriminator to have an appropriate feedback loop delay considering the resolution of the RADAR. The fabricated MSP discriminator provided a reference scattering point as an RCS of approximately 1 dBsm. As a result, by using the MSP discriminator, the physical scattering points of the target were clearly identified in the measured signals with the RADAR.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.207-207
• /
• 2010

Both ZnO and GaN have excellent physical properties in optoelectronic devices such as blue light emitting diode (LED), blue laser diode (LD), and ultra-violet (UV) detector. The ZnO/GaN heterostructure, which has a potential to achieve the cost efficient LED technology, has been fabricated by using radio frequency (RF) sputtering, pyrolysis, metal organic chemical vapor deposition (MOCVD), direct current (DC) arc plasmatron, and pulsed laser deposition (PLD) methods. Among them, the PLD system has a benefit to control the composition ratio of the grown film from the mixture target. A 500-nm-thick ZnO film was grown by PLD technique on c-plane GaN/sapphire substrates. The post annealing process was executed at some varied temperature between from $300^{\circ}C$ to $900^{\circ}C$. The morphology and crystal structural properties obtained by using atomic force microscope (AFM) and x-ray diffraction (XRD) showed that the crystal quality of ZnO thin films can be improved as increasing the annealing temperature. We will discuss the post-treatment effect on film quality (uniformity and reliability) of ZnO/GaN heterostructures.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.160-163
• /
• 2003

This paper describes on anodic bonding characteristics of MLCA(Multi Layer Ceramic Actuator) to Si-wafer using evaporated Pyrex #7740 glass thin-films for MEMS applications. Pyrex #7740 glass thin-films with same properties were deposited on MLCA under optimum RF magneto conditions(Ar 100 %, input power $1\;/cm^2$). After annealing in $450^{\circ}C$ for 1 hr, the anodic bonding of MLCA to Si-wafer was successfully performed at 600 V, $400^{\circ}C$ in - 760 mmHg. Then, the MLCA/Si bonded interface and fabricated Si diaphragm deflection characteristics were analyzed through the actuation test. It is possible to control with accurate deflection of Si diaphragm according to its geometries and its maximum non-linearity is 0.05-008 %FS. Moreover, any damages or separation of MICA/Si bonded interfaces do not occur during actuation test. Therefore, it is expected that anodic bonding technology of MICA/Si wafers could be usefully applied for the fabrication process of high-performance piezoelectric MEMS devices.