• 한국해양학회지
• /
• v.30 no.1
• /
• pp.27-38
• /
• 1995

For the study of oceanic surface current, this work presents a system design which is composed of three parts, a Global Positiong System(GPS) unit, a transmitter with radio frequency (RF) modem and an antenna which are housed in a plastic spherical buoy, and computerised of VHF receiving system. The key idea for this study is to employ a commercially available GPS on a drifting buoy and to utilize the receiver position information from the buoy in determining the Lagrangian motion of surface ocean waters. Great efforts has been paid to the system design which would demand several points in harsh conditions common in the sea surface, that is power supply problems housed inside of a plastic buoy, optimizing transmitting radio frequency which limits transmitting distance to a receiving station. for all these difficulties, the system appears to be promising in future oceanic applications and is considered to economical compared to ARGOS drift buoy which is being used by commercial base. We believe that the system needs to be improved in terms of several aspects such as a longer transmitting distance, a power supply and software. for the test experiments in situ, the system has employed off the coast of Ku Ryong Po int the southeast part of Korea and successfully collected the surface current data. The results are presented for two cases from 21 to 31, March 1994 and 21 to 25, June 1994 in terms of current statistics and trajectories of drifting buoys.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.336-336
• /
• 2011

AMOLED에 대한 관심이 높아짐에 따라 LTPS (Low Temperature Poly Silicon) TFT에 대한 연구가 활발히 이루어지고 있다. 다결정 실리콘은 단결정 실리콘에 비해 100 cm2/V 이상의 이동도를 보이는 우수한 특성으로 인해 AMOLED 디스플레이에 적합하며 여러 기업에서 LTPS 공정을 이용한 TFT제작을 연구 중이다. LTPS 공정은 현재 ELA (Excimer Laser Annealing) 방식으로 대면적 유리기판에 ELA 방법을 적용함에 있어 설비투자 비용이 지나치게 높아진다는 단점을 가지고 있다. 설비투자 비용의 문제점을 해결하기 위해 Diode Laser을 이용하여 Annealing하는 방법에 대해 연구하였다. 본 연구는 Diode Laser Annealing 방식을 이용하여 poly-Si을 구현하였다. 단결정 실리콘을 제작하기 위해 ICP-CVD장비를 이용하여 150$^{\circ}C$에서 SiH4, He2 혼합, He/SiH4의 flow rate는 20/2[sccm], RF power는 400 W에서 700 W으로 가변, 증착 압력은 25mTorr으로 하였다. 940 nm 파장의 30 W Diode Laser를 8 mm Spot Size로 a-Si에 순간 조사하여 결정화, 그 결과 grain을 형성한 polycrystalline 구조를 확인하였다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.1
• /
• pp.67-75
• /
• 2008

RFID(Radio Frequency Identification) system is an automated identification system that consists of tags and readers. They communicate with each other by RF signal. As a reader can identify many tags in contactless manner using RF signal, RFID system is expected to do a new technology to substitute a bar-code system. But RFID system creates new threats to the security and privacy of individuals, Because tags and readers communicate with each other in insecure channel using RF signal. So many people are trying to study various manners to solve privacy problems against attacks, but it is difficult to apply to RFID system based on low-cost Gen2. Therefore, We will propose a new encryption scheme using matrix based on Gen2 in RFID system in paper, and We will analyze our encryption scheme in view of the security and efficiency through a simulation and investigate application environments to use our encryption scheme.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.339-339
• /
• 2012

지난 몇 년 동안, 투명 비정질 산화물 반도체는 유기 발광 다이오드, 플렉서블 전자 소자, 솔라 셀, 바이오 센서 등 많은 응용분야에 연구되고 있다. 투명 비정질 산화물 반도체 그룹들 중, 특히 비정질 IGZO 박막 트랜지스터는 비정질 상태임에도 불구하고 높은 이동도와 낮은 동작 전압으로 훌륭한 소자 특성을 보인다. 이러한 고성능의 IGZO 박막 트랜지스터는 RF 마그네트론 스퍼터링이나 pulsed laser deposition과 같은 고진공 장비를 이용하여 이미 여러 그룹에서 제작되고 발표되었다. 하지만 진공 증착 시스템은 제조 비용의 절감이나 디스플레이 패널의 대면적화에 큰 걸림돌이 되고 있고, 이러한 문제점을 극복하기 위해서 용액 공정은 하나의 해결책이 될 수 있다. 용액 공정의 가장 큰 장점으로는 저온 공정이 가능하기 때문에 글라스나 플라스틱 기판에서 대면적으로 제작할 수 있고 진공 장비가 필요없기 때문에 제조 비용을 획기적으로 절감시킬 수 있다. 본 연구에서는 high-k 게이트 절연막과 IGZO 채널 층을 용액 공정을 이용하여 박막 트랜지스터를 제작하고 그에 따른 전기적 특성을 분석하였다. IGZO의 몰 비율은 In, Ga, Zn 순으로 각각 0.2 mol, 0.1 mol, 0.1 mol로 제작하였고, high-k 게이트 절연막으로는 Al2O3, HfO2, ZrO2을 제작하였다. 또한, 용액 공정 IGZO TFT를 제작하기 전, 용액 공정 high-k 게이트 절연막 캐패시터를 제작하여 그 특성을 분석하였다. 다양한 용액 공정 high-k 게이트 절연막 중, 용액공정 HfO2를 이용한 IGZO TFT는 228.3 [mV/dec]의 subthreshold swing, 18.5 [$cm^2/V{\cdot}s$]의 유효 전계 이동도, $4.73{\times}106$의 온/오프 비율을 보여 매우 뛰어난 전기적 특성을 확인하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.3
• /
• pp.122-126
• /
• 2012

The properties of Al-doped ZnO (AZO) films were investigated as a function of $H_2/(Ar+H_2)$ gas ratio using an AZO (2 wt% $Al_2O_3$) ceramic target in a radio frequency (RF) magnetron sputtering system. The deposition process was done at $200^{\circ}C$ and in $2{\times}10^{-2}$ Torr working pressure and with various ratios of $H_2/(Ar+H_2)$ gas. During the AZO film deposition process, partial $H_2$ gas affected the AZO film characteristics. The electron resistivity (${\sim}9.21{\times}10^{-4}\;{\Omega}cm$) was lowest and mobility (${\sim}17.8\;cm^2/Vs$) was highest in AZO films when the $H_2/(Ar+H_2)$ gas ratio was 2.5 %. When the $H_2/(Ar+H_2)$ gas ratio was increased above 2.5 %, the electron resistivity increased and mobility decreased with increasing $H_2/(Ar+H_2)$ gas ratio in AZO films. The carrier concentration increased with increasing $H_2/(Ar+H_2)$ gas ratio from 0 % to 7.5 %. This phenomenon was explained by reaction of hydrogen and oxygen and additional formation of oxygen vacancy. The average optical transmission in the visible light wavelength region over 90 % and an orientation of the deposition was [002] orientation for AZO films grown with all $H_2/(Ar+H_2)$ gas ratios.

• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.79-84
• /
• 1998

This paper describes the minimum ignition limit voltages for LPG-Air 5.25[Vol$\%$] mixture gas by discharge sparks in radio-frequency limits using RF power supply and IEC type ignition spark apparatus. As a result, the minimum ignition limit voltages is increased in proportional to the rate of increasing of frequency in LPG-Air mixture gas. Especially, the minimum ignition limit voltages increase remarkably between 3[KHz] and 10[KHz]. It is considered that ignition is caused by one discharge until 3[KHz] and, beyond 3[KHz] ignitiof is caused by more than two discharges. The reason is analyzed that energy loss is caused by existing pause interval between discharges. It is considered that the result can be used for not only data for researches and development of intrinsically safe explosion-proof RF machines which are applied tole-equipments and detectors used in dangerous areas but also for datum for its equipment tests.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.11
• /
• pp.2581-2585
• /
• 2010

In the field of network sense for the Ubiquitous environment, the technology of RFID is a significant part. Due to the real time processing of information and the property of network, RFID has been used in service field such as distribution, administrative control of physical distribution, remote measuring device, and security. instead of currently used bar-code. The management system of port facilities using the current RFID technology has the effects of reducing working hours and improvement in data processing, but it is not proper for human resource allocation since it is dominantly worked for physical resources. In this paper, we designed and implemented personnel control system using RFID of 2.4GHz in port facilities which presents a monitoring system for safety operation and increase of efficiency using RFID in order to overcome the limitations and problems of current port operation management techniques.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.520-523
• /
• 2010

In the field of network sense for the Ubiquitous environment, the technology of RFID is a significant part. Due to the real time processing of information and the property of network, RFID has been used in service field such as distribution, administrative control of physical distribution, remote measuring device, and security, instead of currently used bar-code. The management system of port facilities using the current RFID technology has the effects of reducing working hours and improvement in data processing, but it is not proper for human resource allocation since it is dominantly worked for physical resources. In this paper, we designed and implemented personnel control system using RFID of 2.4GHz in port facilities which presents a monitoring system for safety operation and increase of efficiency using RFID in order to overcome the limitations and problems of current port operation management techniques.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.209-209
• /
• 2010

금(Au) 또는 은(Ag) 금속 나노입자의 모양, 크기, 분포 상태를 조절하여 가시광선과 적외선, 자외선 영역에서 강한 표면 플라즈몬 효과을 이용할 수 있는데, 최근 이러한 금속 나노입자의 표면플라즈몬 효과를 이용하여 태양광 소자의 성능을 향상시키는 연구가 매우 활발하게 이루어지고 있다. 그 중, 높은 효율과 낮은 제작비용 그리고 간단한 공정과정의 장점을 갖고 있어서 크게 주목 받고 있는 염료감응태양전지에서도 금(Au) 또는 은(Ag) 금속 나노입자을 이용하기 위한 많은 연구가 진행되고 있다. 그 예로, Au가 코팅된 $TiO_2$ 기반의 염료감응태양전지구조를 제작하여, 입사된 빛이 표면플라즈몬 효과를 통해, Au에서 여기된 전자들이 Au/$TiO_2$ 사에의 schottky 장벽을 통과하여 $TiO_2$의 전도대 전자들의 밀도가 증가하여, charge carrier generating rate을 높여 소자의 광변환 효율의 향상을 증명하였다. 이에 본 연구에서는, $TiO_2$보다 높은 전자 이동도(mobility)와 직선통로(direct path way)의 장점을 갖고 있는 ZnO nanorod에서의 charge carrier generating rate을 높일 수 있도록, 비교적 가격이 저렴한 Ag nanoparticle을 코팅하였다. ZnO nanorod 제작은 낮은 온도에서 간단하게 성장시킬 수 있는 hydrothermal 방법을 이용하였다. 기판위에 RF magnetron 스퍼터를 이용하여 AZO seed layer를 증착한 후, zinc nitrate $Zn(NO_3)_2{\cdot}6H_2O$과 hexamethylentetramines (HMT)으로 혼합된 용액을 사용해 ZnO nanorods를 성장시켰다. 이 후, Ag를 형성할 수 있도록 열증기증착법을 이용하여 코팅하였다. Ag의 증착시간에 따른 ZnO nanorods에서의 코팅된 구조와 형태를 관찰하기 위해 field emission scanning electron microscopy (FE-SEM)을 이용하여 측정하였으며, 결정성을 조사하기 위해 X-ray diffraction (XRD)을 이용하여 분석하였다. 또한 입사된 빛에 의해, 여기된 ZnO 전도대 전자들이 다시 재결합을 통해 방출되는 photoluminescence 양을 scanning PL 장비를 통해 측정하여 Ag가 코팅된 ZnO nanorod의 광특성을 분석하였다.

• Journal of the Korean Vacuum Society
• /
• v.16 no.4
• /
• pp.298-304
• /
• 2007

We have studied the effect of $N_2$ flow rate on the structural and optical properties of GaN nanorods grown on (111) Si substrates by radio-frequency plasma-assisted molecular-beam epitaxy. The hexagonal shape nanorods with lateral diameters from 80 to 190 nm with increasing $N_2$ flow rate from 1.1 to 2.0 sccm are obtained. However, the ratio of length (thickness) and compact region increases with increasing $N_2$ flow rate up to 1.7 sccm and then saturate. From the photoluminescence, free exciton transition is clearly observed for GaN nanorods with low $N_2$ flow rate. And the PL peak energies are blue-shifted with decreasing diameter of the GaN nanorods due to size effect. Temperature-dependent photoluminescence spectra for the nanorods with $N_2$ flow rate of 1.7 sccm show an abnormal behavior like "S-shape" with increasing temperature.