• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.1-8
• /
• 2011

In this paper, data transmission corrugated horn antenna for RF sensor satellite system and its radiation characteristic are presented. The proposed antenna is designed, fabricated and measured to obtain the maximum gain at ${\pm}60^{\circ}$ of its radiation patterns. The result of the proposed antenna is that the return loss is less than -15 dB and the gain is over 5 dBi at ${\pm}60^{\circ}$ of its radiation patterns. From these results, it is confirmed that the proposed can be used as data transmission corrugated horn antenna for RF sensor satellite system.

• Korean Journal of Materials Research
• /
• v.7 no.8
• /
• pp.640-645
• /
• 1997

Pd게이트 MOS센서의 수소검지특성에 Pd 박막의 증착조건이 미치는 영향에 대해서 조사였다. rf power의 증가와 증착온도의 증가는 모두 센서의 감도와 초기반응속도를 감소시켰으며 rf power의 변화보다는 증착온도의 변화에 의한 효과가 현저하였다. 절연막을 Si$_{x}$N$_{y}$ /SiO$_{2}$로 대신한 결과 SiO$_{2}$에서돠는 달리 시간이 지남에 따라 평탄대역전압이 여러 단계로 변화하는 양상을 보였다. rf power, 증착온도, 기판의 변화가 MOS 센서의 감도나 초기반응속도등의 센서특성에 영향을 미친다는 사실을 확인할 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.6
• /
• pp.34-42
• /
• 2011

With the progress of USN technology, fields to which wireless sensor node is applicable are increased under a condition that it holds a lot of problems to solve for betterment. One of the problems which acts as an obstacle to USN industry diffusion is the wireless sensor node battery exchange to their individual life cycle. Exchanging the battery of so many sensor nodes one by one requires a great deal of times and costs. Such problem is against the convenience supply -aim by applying USN technology. In this paper, using RF wireless power transmission system that power transmission / harvesting module from a distance of 5 m and the power of 10 dBm with a current of 1 mA or more for Sensor Nodes in lithium-polymer battery charging system tested and verified.

• Journal of Sensor Science and Technology
• /
• v.25 no.5
• /
• pp.337-343
• /
• 2016

In this paper, we newly introduce a wireless identification system using a solar cell and RF transceivers. The reader sends interrogating signal to a transponder using LED visible light, and the transponder responds to the reader using RF signal. The transponder consists of a solar cell, an amplifier, a microprocessor, and an RF transmitter. The solar cell receives the visible light from the reader and generates current to supply electric power to the other devices in the transponder. At the same time, the solar cell detects interrogating signal in the reader light. The microprocessor senses the interrogating signal and generates a responding signal. The RF transmitter radiates the responding signal to the reader. The transponder is a passive circuit because it operates without external power. In experiments, the maximum read distance between a reader and a transponder was about 1.6 meter.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.1
• /
• pp.8-13
• /
• 2022

This paper investigates the method to implement a RF (Radio Frequency) energy harvesting sensor node and to build a sensor network using a CATV network and a leaky coaxial cable. The power supply of a sensor node is designed with the WPTS (Wireless Power Transfer System) receiver operating at 915MHz. A sensor network has limited coverage by the loss of RF signal at a wireless transmission link. The paper proposes to build a sensor network that the BLE signal of a sensor and the signal of a WPTS power transmitter are transmitted through a coaxial cable of a CATV network by utilizing WOC (WiFi over Coax) technology and radiates at a leaky coaxial cable. The length of a leaky coaxial cable and the total loss of a wire link are allowed to the point that the RSSI of a sensor node is more than the minimum value (-78dBm) and lead to extend wireless coverage.

• Journal of Sensor Science and Technology
• /
• v.14 no.3
• /
• pp.150-155
• /
• 2005

We propose a newly developed automobile sensor monitoring system incorporated with a tire pressure monitoring sensor(TPMS). The RF-transmitter based on a tire pressure sensor, sends a frame data about measured tire-pressure to RF receiver. And the various sensing signals based on sensors such as fuel-level sensor, engine oil level sensor and temperature sensors, are converted into 10-bit digital data. The microprocessor displays converting data such as tire pressure, trip distance, fuel quantity, coolant temperature and car-room temperature, on LCD panel. The proposed system can be successfully adapted to monitoring of the tire pressure and various automobile sensors.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.1180-1185
• /
• 2009

Database is constructed according to the development of information contents technology. But the construction of database using bio-information has not been developed. because it is difficult to collect bio-information. This paper presents how to construct database about sensing temperature and tilt of cow based on bio-information using RF communication. The system consists of 8bit micro-controller, tilt sensor, temperature sensor and RF module.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2004.06a
• /
• pp.101-105
• /
• 2004

본 논문에서는 온도 센서로부터 얻어지는 데이터를 전송하고 실시간으로 처리하기 위하여 RF방식을 이용한 단 방향 데이터 전송 시스템을 설계하고 그 특성을 측정하였다. 설계된 무선 전송기능의 온도 측정 시스템은 온도센서 및 제어부, 데이터 전송용 RF module로 구성되었다. 온도 측정을 위한 센서는 AD590 전류 구동 형 전압출력 센서이며 제어부는 PIC one-chip microprocessor를 사용하였다. 또한 데이터의 무선 전송을 위해 433MHz 주파수 대역의 반 이중 RF Module을 사용하여 system을 구현하였다. 실험은 10M 이내의 실내 공간 내에서 수행되었고, 임의의 온도측정 구간에 따른 온도 변화 환경에서 3가지 경우의 (3M,5M,10M) 거리 변화를 두고 데이터를 측정 및 비교 분석하였다. 실험결과 10M 이내의 거리에서는 온도센서로부터 얻어진 데이터를 실시간으로 송수신하여 결과를 처리할 수 있었으며 이를 이용한 다중 Sensor 시스템 구현이 가능한 결과를 얻었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.172-173
• /
• 2012

최근 의료산업에서는 동영상 구현이 가능한 직접 방식의 X-선 검측센서에서 X-ray 흡수효율이 좋은 반도체센서와 성숙된 기술. 본 연구에서는 non-alkali 기판에 evaporation 및 RF magnetron sputtering법으로 기판온도를 증가시키며 CdTe막을 증착하였다. 또한, RF magnetron sputtering을 이용하여 상온에서 증착한 CdTe막을 진공 및 대기 중에서 후열처리한 후 미세구조 변화를 관찰하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.10
• /
• pp.123-131
• /
• 2009

In this paper, we design ZigBee RF based framework for mobile web service on collected data by sensor node and transmitting data to data base by sensor network and remote sensing server through wireless connection. The proposed system is an integrated platform of sensor network for the sensor management and providing SOA based sensor web access. This paper combines SOA technology with sensor network. composes sensor node as web view, and provides high capability. extensiveness, reliability, and usability to the user who accesses to sensor web. The mobile message conversion module, SOAP message processing module. WSDL message generator, and mobile web service module is embodied for improving the capacity of the framework. The capacity evaluation of local wireless communication system which is proposed in this paper is analyzed through NS-2 simulation.