• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1210-1210
• /
• 2001

On farm analysis of protein, moisture and oil in cereals and oil seeds is quickly being adopted by Australian farmers. The benefits of being able to measure protein and oil in grains and oil seeds are several : $\square$ Optimize crop payments $\square$ Monitor effects of fertilization $\square$ Blend on farm to meet market requirements $\square$ Off farm marketing - sell crop with load by load analysis However farmers are not NIR spectroscopists and the process of calibrating instruments has to the duty of the supplier. With the potential number of On Farm analyser being in the thousands, then the task of calibrating each instrument would be impossible, let alone the problems encountered with updating calibrations from season to season. As such, NIR technology Australia has developed a mechanism for \ulcorner\ulcorner\ulcorner their range of Cropscan 2000G NIR analysers so that a single calibration can be transferred from the master instrument to every slave instrument. Whole grain analysis has been developed over the last 10 years using Near Infrared Transmission through a sample of grain with a pathlength varying from 5-30mm. A continuous spectrum from 800-1100nm is the optimal wavelength coverage fro these applications and a grating based spectrophotometer has proven to provide the best means of producing this spectrum. The most important aspect of standardizing NIB instruments is to duplicate the spectral information. The task is to align spectrum from the slave instruments to the master instrument in terms of wavelength positioning and then to adjust the spectral response at each wavelength in order that the slave instruments mimic the master instrument. The Cropscan 2000G and 2000B Whole Grain Analyser use flat field spectrographs to produce a spectrum from 720-1100nm and a silicon photodiode array detector to collect the spectrum at approximately 10nm intervals. The concave holographic gratings used in the flat field spectrographs are produced by a process of photo lithography. As such each grating is an exact replica of the original. To align wavelengths in these instruments, NIR wheat sample scanned on the master and the slave instruments provides three check points in the spectrum to make a more exact alignment. Once the wavelengths are matched then many samples of wheat, approximately 10, exhibiting absorbances from 2 to 4.5 Abu, are scanned on the master and then on each slave. Using a simple linear regression technique, a slope and bias adjustment is made for each pixel of the detector. This process corrects the spectral response at each wavelength so that the slave instruments produce the same spectra as the master instrument. It is important to use as broad a range of absorbances in the samples so that a good slope and bias estimate can be calculated. These Slope and Bias (S'||'&'||'B) factors are then downloaded into the slave instruments. Calibrations developed on the master instrument can then be downloaded onto the slave instruments and perform similarly to the master instrument. The data shown in this paper illustrates the process of calculating these S'||'&'||'B factors and the transfer of calibrations for wheat, barley and sorghum between several instruments.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.1
• /
• pp.115-125
• /
• 2000

In recent years a great deal of information has accumulated for livestock on vitamin. function, metabolism and supplemental needs. The role of the antioxidant "vitamins" (carotenoids, vitamin E and vitamin C) in immunity and health of livestock has been a fruitful area of research. These nutrients play important roles in animal health by inactivating harmful free radicals produced through normal cellular activity and from various stressors. Both in vitro and in vivo studies showed that these antioxidant vitamins generally enhance different aspects of cellular and noncellular immunity. A compromised immune system will result in reduced animal production efficiency through increased susceptibility to diseases, thereby leading to increased animal morbidity and mortality. Vitamin E has been shown to increase performance of feedlot cattle and to increase immune response for ruminant health, including being beneficial for mastitis control. Vitamin E given to finishing cattle at higher than National Research Council (NRC) requirements dramatically maintained the red color (oxymyoglobin) compared with the oxidized metmyoglobin of beef. Under commercial livestock and poultry production conditions, vitamin allowances higher than NRC requirements may be needed to allow optimum performance. Generally, the optimum vitamin supplementation level is the quantity that achieves the best growth rate, feed utilization, health (including immune competency), and provides adequate body reserves.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.1 s.173
• /
• pp.62-68
• /
• 2000

Optimization technique to find a path of an inner reinforcement of an automobile hood is proposed by using design sensitivity informations. The strength and modal characteristics of the automobile hood are analyzed and their design sensitivity analyses with respect to the thickness are carried out using MSC/NASTRAN. Based on the design sensitivity analysis, determination of design variables and response functions is discussed. Techniques improving design from design sensitivity informations are suggested and the double-layer method is newly proposed to optimize the path of stiffener for a shell structure, Using the suggested method, we redesign a new inner reinforcement of an automobile hood and compare the responses with the original design. It is confirmed that new design improved in the frequency responses without the weight increasement.

• Journal of the Korea Concrete Institute
• /
• v.12 no.2
• /
• pp.3-11
• /
• 2000

There is a possibility of poor-state concrete filling condition due to segregation and interlocking of aggregate and paste when a high performance concrete is used at reinforced concrete structure without compaction. This study was conducted to evaluate the flexural behavior of high performance concrete beams with design parameters such as c, t and different concrete filling conditions. Different concrete filling conditions were intentionally made such that the first type specimen was soundly cast to obtain the perfect concrete filling condition. Second type was cast in such a way that up to the longitudinal tensile reinforcement from the top, good concrete was filled while poor concrete was poured for the bottom part to simulate the poor strength, workability and unsatisfactory compaction. Third type was cast in such a was that up to the neutral axis of the beam section from the top, good concrete was filled while so did for the bottom part as the second type. The test results were analyzed in terms of load-displacement response, failure pattern, crack width and crack spacing. The test results indicate that have no effect of concrete filling conditions on the yielding strength of structures. But, have a grate influence on the stiffness and ductility of structures.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.10
• /
• pp.1407-1413
• /
• 2000

Oil palm frond (OPF) is a new non-conventional fibrous feed for ruminants. Evaluation on the nutritive values and digestibility of OPF was carried out using goats. In a completely randomised design, 20 local male goats were assigned to evaluate fresh and different types of processed OPF. A 60 day feeding trial was done to determine the digestible nutrient intake of fresh, ensiled and pelleted OPF and its response on live weight gain of goat. The pelleting of OPF increased (p<0.05) intake compared to fresh or ensiled OPF. The OPF based mixed pellet (50% OPF with 15% palm kernel cake, 6% rice bran, 6% soybean hull, 15% molasses, 2% fishmeal, 4% urea, 1.5% mineral mixture and 0.5% common salt) increased (p<0.05) nutrient intake, digestibility and reduced feed refusals. The mixed pellet also increased digestible dry matter intake (DDMI) and digestible organic matter intake (DOMI) at 80% and 63% level respectively than the fresh OPF. The increased digestible nutrient intake on the OPF based mixed pellet, resulted in increased live weight gain of goats. Furthermore, OPF has a good potential as a roughage source when it is used with concentrate supplement. OPF based formulated feed in a pelleted form could be used as a complete feed for intensive production of goat and other ruminants.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1508-1513
• /
• 2000

The aim of this trial was to study the response of laboratory animals including omnivores (rats) and herbivores (rabbits, guinea pigs and hamsters) to the same level of dietary fiber on their digestive enzymes and hindgut fermentation. Ten weanling animals of each of four species, rabbits, guinea-pigs, rats and Syrian hamster, were fed a basal diet of 18% crude protein and 10% crude fiber for six weeks. The digesta and tissue of each intestinal segment were collected to measure the activity of digestive enzymes. Rabbits contained the highest secreted pepsin activity in the stomach, whereas rats contained the highest protease and ${\alpha}-amylase$ activity in the small intestine, and lower fibrous hydrolases in the hindgut than rabbits, guinea pigs and hamsters. The total VFA productions in the caecum and colon were highest in rats, followed by hamsters and rabbits, while the guinea pigs contained the lowest VFA and a different pattern of VFA molar ratio from the other laboratory animals. The degree of hindgut fermentation in these laboratory animals was in reverse to the trend for their fiber digestion.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.11
• /
• pp.1315-1322
• /
• 1988

$SnO_X$/Pt thin film gas sensors were fabricated and their performance characteristics were measured. The $SnO_X$/Pt films were deposited by vacuum evaporating the $SnO_2$ target mixed with 2 wt% Pt. The conductivity showed the temperature dependence and the sensitivity to CO gas was proportional to the square root of gas concentration below 2000 ppm. The optimum operating temperature of the fabricated devices was about 300$^{\circ}$C and the response time in 5000 ppm CO gas was about 20 sec.

• Korean Journal of Health Education and Promotion
• /
• v.9 no.2
• /
• pp.1-11
• /
• 1992

For the world as a whole, many of the trends in health are towards improvement, especially in terms of increasing life expectancy and decreasing infant mortality. By the year 2000 we expect some diseases such as poliomyelitis to be eradicated, and others, such as leprosy, measles and iodine deficiency disorders, to have been brought under virtually complete control. For this country, the situation will probably soon be like that of the OECD-countries, with a life expectancy for both men and women of over 75 years, 12% or more of the population in the age group of 65 and over, and 75% of the population living in cities. Once those levels have been reached, however, change becomes much more gradual. In this paper I will mention some of the health benefits we now enjoy as a result of rapid development, as well as some of the new problems we now face. I will then attempt to show how health promotion is a response to this new situation and how it can be used in some particular dimensions of modem life. (omitted)

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.12
• /
• pp.2945-2951
• /
• 2000

Because of the inherent flexibility in their design for improved material properties, composites have wide applications in aerospace vehicles and automobiles. The purpose of this study is to investigate the energy absorption characteristics of CFRP( Carbon Fiber Reinforced Plastics); tubes on static and impact tests. Static compression tests have been carried out using the static testing machine(Shin-gang buckling testing machine)and impact compression tests have been carried out using the vertival crushing testing machine. When such tubes were subjected to crushing loads, the response is complex and depends on the interaction between the different mechanisms that control the crushing process. The collapse characteristics and energy absorption were examined. Trigger and interlaminar number affect energy absorption capability of CFRP tubes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.8 s.179
• /
• pp.1949-1957
• /
• 2000

All the loads in the real world act dynamically on structures. Since dynamic loads are extremely difficult to handle in analysis and design, static loads are utilized with dynamic factors. The dyna mic factors are generally determined based on experiences. Therefore, the static loads can cause problems in precise analysis and design. An analytical method based on modal analysis has been proposed for the transformation of dynamic loads into equivalent static load sets. Equivalent static load sets are calculated to generate an identical displacement field in a structure with that from dynamic loads at a certain time. The process is derived and evaluated mathematically. The method is verified through numerical tests. Various characteristics are identified to match the dynamic and the static behaviors. For example, the opposite direction of a dynamic load should be considered due to the vibration response. A dynamic bad is transformed to multiple equivalent static loads according to the number of the critical times. The places of the equivalent static load can be different from those of the dynamic load. An optimization method is defined to use the equivalent static loads. The developed optimization process has the same effect as the dynamic optimization which uses the dynamic loads directly. Standard examples are solved and the results are discussed